Diff: nRF24L01P_Maniacbug.cpp

Revision:

8:ea2d2e86df4f

Parent:

7:8858f26d373f

--- a/nRF24L01P_Maniacbug.cpp	Fri Oct 03 04:39:21 2014 +0000
+++ b/nRF24L01P_Maniacbug.cpp	Thu Jan 01 11:56:44 2015 +0000
@@ -40,12 +40,12 @@
 {
   uint8_t status;
 
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( R_REGISTER | ( REGISTER_MASK & reg ) );
   while ( len-- )
     *buf++ = spi.write(0xff);
 
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -54,11 +54,11 @@
 
 uint8_t RF24::read_register(uint8_t reg)
 {
-  csn(LOW);
+  csn(RF_LOW);
   spi.write( R_REGISTER | ( REGISTER_MASK & reg ) );
   uint8_t result = spi.write(0xff);
 
-  csn(HIGH);
+  csn(RF_HIGH);
   return result;
 }
 
@@ -68,12 +68,12 @@
 {
   uint8_t status;
 
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( W_REGISTER | ( REGISTER_MASK & reg ) );
   while ( len-- )
     spi.write(*buf++);
 
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -86,10 +86,10 @@
 
 //  IF_SERIAL_DEBUG(printf(("write_register(%02x,%02x)\r\n"),reg,value));
 
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( W_REGISTER | ( REGISTER_MASK & reg ) );
   spi.write(value);
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -107,13 +107,13 @@
   
   //printf("[Writing %u bytes %u blanks]",data_len,blank_len);
   
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( W_TX_PAYLOAD );
   while ( data_len-- )
     spi.write(*current++);
   while ( blank_len-- )
     spi.write(0);
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -130,13 +130,13 @@
   
   //printf("[Reading %u bytes %u blanks]",data_len,blank_len);
   
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( R_RX_PAYLOAD );
   while ( data_len-- )
     *current++ = spi.write(0xff);
   while ( blank_len-- )
     spi.write(0xff);
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -147,9 +147,9 @@
 {
   uint8_t status;
 
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( FLUSH_RX );
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -160,9 +160,9 @@
 {
   uint8_t status;
 
-  csn(LOW);
+  csn(RF_LOW);
   status = spi.write( FLUSH_TX );
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return status;
 }
@@ -173,9 +173,9 @@
 {
   uint8_t status;
 
-  csn(LOW);
-  status = spi.write( NOP );
-  csn(HIGH);
+  csn(RF_LOW);
+  status = spi.write( RF_NOP );
+  csn(RF_HIGH);
 
   return status;
 }
@@ -343,8 +343,8 @@
   //spi.begin();
   mainTimer.start();
 
-  ce(LOW);
-  csn(HIGH);
+  ce(RF_LOW);
+  csn(RF_HIGH);
 
   // Must allow the radio time to settle else configuration bits will not necessarily stick.
   // This is actually only required following power up but some settling time also appears to
@@ -414,7 +414,7 @@
   flush_tx();
 
   // Go!
-  ce(HIGH);
+  ce(RF_HIGH);
 
   // wait for the radio to come up (130us actually only needed)
 //  wait_msMicroseconds(130);
@@ -425,7 +425,7 @@
 
 void RF24::stopListening(void)
 {
-  ce(LOW);
+  ce(RF_LOW);
   flush_tx();
   flush_rx();
 }
@@ -523,10 +523,10 @@
   write_payload( buf, len );
 
   // Allons!
-  ce(HIGH);
+  ce(RF_HIGH);
 //  wait_msMicroseconds(15);
     wait_us(15); 
-  ce(LOW);
+  ce(RF_LOW);
 }
 
 /****************************************************************************/
@@ -535,10 +535,10 @@
 {
   uint8_t result = 0;
 
-  csn(LOW);
+  csn(RF_LOW);
   spi.write( R_RX_PL_WID );
   result = spi.write(0xff);
-  csn(HIGH);
+  csn(RF_HIGH);
 
   return result;
 }
@@ -669,10 +669,10 @@
 
 void RF24::toggle_features(void)
 {
-  csn(LOW);
+  csn(RF_LOW);
   spi.write( ACTIVATE );
   spi.write( 0x73 );
-  csn(HIGH);
+  csn(RF_HIGH);
 }
 
 /****************************************************************************/
@@ -734,14 +734,14 @@
 {
   const uint8_t* current = reinterpret_cast<const uint8_t*>(buf);
 
-  csn(LOW);
+  csn(RF_LOW);
   spi.write( W_ACK_PAYLOAD | ( pipe & 7 ) );
   const uint8_t max_payload_size = 32;
   uint8_t data_len = min(len,max_payload_size);
   while ( data_len-- )
     spi.write(*current++);
 
-  csn(HIGH);
+  csn(RF_HIGH);
 }
 
 /****************************************************************************/