Revision 1:7fe8da827212, committed 2020-05-12

Comitter:

kenjiArai

Date:

Tue May 12 05:44:33 2020 +0000

Parent:

0:98865e300cd5

Commit message:

expand for several CPU's

Changed in this revision

--- a/0_main.cpp	Sun May 10 08:15:36 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,87 +0,0 @@
-/*
- * Mbed Application program
- *  SoftSerial(also BufferedSoftSerial) function test programs
- *  UART 3 channels
- *      (1) Mbed Serial communication line as "pc"
- *      (2) CPU another UART channel as "ser"
- *      (3) Software Serial channel as "dev"
- *
- * Copyright (c) 2020 Kenji Arai / JH1PJL
- *  http://www7b.biglobe.ne.jp/~kenjia/
- *  https://os.mbed.com/users/kenjiArai/
- *      Created:    May        9th, 2020
- *      Revised:    May       10th, 2020
- */
-
-/*
-    Tested board on OS5.15.3
-        Nucleo-F446RE, Nucleo-L432KC
- */
-
-//  Pre-selection --------------------------------------------------------------
-#include    "select_example.h"
-//#define EXAMPLE_0
-#ifdef EXAMPLE_0
-#warning "Select 0"
-
-//  Include --------------------------------------------------------------------
-#include "mbed.h"
-#include "BufferedSoftSerial.h"
-
-//  Definition -----------------------------------------------------------------
-#define BEFFERED    1
-    
-//  Constructor ----------------------------------------------------------------
-#if defined(TARGET_NUCLEO_L432KC)
-DigitalOut test_point(D12);
-Serial ser(D5, D4, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D6,D3);
-#   else
-    SoftSerial dev(D6,D3);
-#   endif
-#elif defined(TARGET_NUCLEO_F446RE)
-DigitalOut test_point(A0);
-Serial ser(D8, D2, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D4,D3);
-#   else
-    SoftSerial dev(D4,D3);
-#   endif
-#endif
-Serial pc(USBTX,USBRX, 9600);
-
-//  RAM ------------------------------------------------------------------------
-
-//  ROM / Constant data --------------------------------------------------------
-
-//  Function prototypes --------------------------------------------------------
-
-//------------------------------------------------------------------------------
-//  Control Program
-//------------------------------------------------------------------------------
-/*
-    UART 3 channels
-        (1) Mbed Serial communication line as "pc"
-        (2) CPU another UART channel as "ser"
-        (3) Software Serial channel as "dev"
- */
-int main()
-{
-    int count = 0;
-    while(true) {
-        for (uint32_t i = '!'; i < '~'; i++) {
-            dev.putc(i);        // output to softserial
-            ser.putc(i);        // output to another UART
-            pc.putc(i);         // output to PC
-        }
-        dev.puts("----> ABCDEFGHIJKLMOPQRSTUVWXYZ0123456789");
-        ser.puts("----> ABCDEFGHIJKLMOPQRSTUVWXYZ0123456789");
-        pc.puts( "----> ABCDEFGHIJKLMOPQRSTUVWXYZ0123456789");
-        dev.printf("--------->%4d\r\n", count);
-        ser.printf("--------->%4d\r\n", count);
-        pc.printf( "--------->%4d\r\n", count++);
-    }
-}
-
-#endif //#ifdef EXAMPLE_0

--- a/1_main.cpp	Sun May 10 08:15:36 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/*
- * Mbed Application program
- *  SoftSerial(also BufferedSoftSerial) function test programs
- *  UART 3 channels
- *      (1) Mbed Serial communication line as "pc"
- *      (2) CPU another UART channel as "ser"
- *      (3) Software Serial channel as "dev"
- *
- * Copyright (c) 2020 Kenji Arai / JH1PJL
- *  http://www7b.biglobe.ne.jp/~kenjia/
- *  https://os.mbed.com/users/kenjiArai/
- *      Created:    May        9th, 2020
- *      Revised:    May       10th, 2020
- */
-
-/*
-    Tested board on OS5.15.3
-        Nucleo-F446RE, Nucleo-L432KC
- */
-
-//  Pre-selection --------------------------------------------------------------
-#include    "select_example.h"
-//#define EXAMPLE_1
-#ifdef EXAMPLE_1
-#warning "Select 1"
-
-//  Include --------------------------------------------------------------------
-#include "mbed.h"
-#include "BufferedSoftSerial.h"
-
-//  Definition -----------------------------------------------------------------
-#define BEFFERED    1
-    
-//  Constructor ----------------------------------------------------------------
-#if defined(TARGET_NUCLEO_L432KC)
-DigitalOut test_point(D12);
-Serial ser(D5, D4, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D6,D3);
-#   else
-    SoftSerial dev(D6,D3);
-#   endif
-#elif defined(TARGET_NUCLEO_F446RE)
-DigitalOut test_point(A0);
-Serial ser(D8, D2, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D4,D3);
-#   else
-    SoftSerial dev(D4,D3);
-#   endif
-#endif
-Serial pc(USBTX,USBRX, 9600);
-
-//  RAM ------------------------------------------------------------------------
-
-//  ROM / Constant data --------------------------------------------------------
-
-//  Function prototypes --------------------------------------------------------
-
-//------------------------------------------------------------------------------
-//  Control Program
-//------------------------------------------------------------------------------
-/*
-    UART 3 channels
-        (1) Mbed Serial communication line as "pc"
-        (2) CPU another UART channel as "ser"
-        (3) Software Serial channel as "dev"
- */
-int main()
-{
-    while(true) {
-        char c = pc.getc(); // get serial data
-        dev.putc(c);        // send softserail line
-        ser.putc(c);        // another UART
-        pc.putc(c);         // echo back to PC
-    }
-}
-
-#endif //#ifdef EXAMPLE_1

--- a/2_main.cpp	Sun May 10 08:15:36 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/*
- * Mbed Application program
- *  SoftSerial(also BufferedSoftSerial) function test programs
- *  UART 3 channels
- *      (1) Mbed Serial communication line as "pc"
- *      (2) CPU another UART channel as "ser"
- *      (3) Software Serial channel as "dev"
- *
- * Copyright (c) 2020 Kenji Arai / JH1PJL
- *  http://www7b.biglobe.ne.jp/~kenjia/
- *  https://os.mbed.com/users/kenjiArai/
- *      Created:    May        9th, 2020
- *      Revised:    May       10th, 2020
- */
-
-/*
-    Tested board on OS5.15.3
-        Nucleo-F446RE, Nucleo-L432KC
- */
-
-//  Pre-selection --------------------------------------------------------------
-#include    "select_example.h"
-//#define EXAMPLE_2
-#ifdef EXAMPLE_2
-#warning "Select 2"
-
-//  Include --------------------------------------------------------------------
-#include "mbed.h"
-#include "BufferedSoftSerial.h"
-
-//  Definition -----------------------------------------------------------------
-#define BEFFERED    1
-    
-//  Constructor ----------------------------------------------------------------
-#if defined(TARGET_NUCLEO_L432KC)
-DigitalOut test_point(D12);
-Serial ser(D5, D4, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D6,D3);
-#   else
-    SoftSerial dev(D6,D3);
-#   endif
-#elif defined(TARGET_NUCLEO_F446RE)
-DigitalOut test_point(A0);
-Serial ser(D8, D2, 9600);
-#   if BEFFERED
-    BufferedSoftSerial dev(D4,D3);
-#   else
-    SoftSerial dev(D4,D3);
-#   endif
-#endif
-Serial pc(USBTX,USBRX, 9600);
-
-//  RAM ------------------------------------------------------------------------
-
-//  ROM / Constant data --------------------------------------------------------
-
-//  Function prototypes --------------------------------------------------------
-
-//------------------------------------------------------------------------------
-//  Control Program
-//------------------------------------------------------------------------------
-/*
-    UART 3 channels
-        (1) Mbed Serial communication line as "pc"
-        (2) CPU another UART channel as "ser"
-        (3) Software Serial channel as "dev"
- */
-int main()
-{
-    while(true) {
-        char c = dev.getc();// get serial data
-        dev.putc(c);        // echo back to softserial port
-        ser.putc(c);        // another UART
-        pc.putc(c);         // Mbed Serial
-    }
-}
-
-#endif //#ifdef EXAMPLE_2
\ No newline at end of file

--- a/3_main.cpp	Sun May 10 08:15:36 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/*
- * Mbed Application program
- *  SoftSerial(also BufferedSoftSerial) function test programs
- *  UART 3 channels
- *      (1) Mbed Serial communication line as "pc"
- *      (2) CPU another UART channel as "ser"
- *      (3) Software Serial channel as "dev"
- *
- * Copyright (c) 2020 Kenji Arai / JH1PJL
- *  http://www7b.biglobe.ne.jp/~kenjia/
- *  https://os.mbed.com/users/kenjiArai/
- *      Created:    May        9th, 2020
- *      Revised:    May       10th, 2020
- */
-
-/*
-    Tested board on OS5.15.3
-        Nucleo-F446RE, Nucleo-L432KC
- */
-
-//  Pre-selection --------------------------------------------------------------
-#include    "select_example.h"
-//#define EXAMPLE_3
-#ifdef EXAMPLE_3
-#warning "Select 3"
-
-//  Include --------------------------------------------------------------------
-#include "mbed.h"
-#include "BufferedSoftSerial.h"
-
-//  Definition -----------------------------------------------------------------
-#if (MBED_MAJOR_VERSION == 2)
-#error "Cannot run on OS2"
-#endif
-
-//  Constructor ----------------------------------------------------------------
-#if defined(TARGET_NUCLEO_L432KC)
-DigitalOut test_point(D12);
-Serial ser(D5, D4, 9600);
-BufferedSoftSerial dev(D6,D3);
-#elif defined(TARGET_NUCLEO_F446RE)
-DigitalOut test_point(A0);
-Serial ser(D8, D2, 9600);
-BufferedSoftSerial dev(D4,D3);
-#endif
-Serial pc(USBTX,USBRX, 9600);
-
-//  RAM ------------------------------------------------------------------------
-
-//  ROM / Constant data --------------------------------------------------------
-
-//  Function prototypes --------------------------------------------------------
-void pc2dev(void const *args);
-void dev2pc(void const *args);
-
-//------------------------------------------------------------------------------
-//  Control Program
-//------------------------------------------------------------------------------
-osThreadDef(pc2dev, osPriorityNormal,1024);
-osThreadDef(dev2pc, osPriorityNormal,1024);
-
-int main()
-{
-    // Start tasks
-    osThreadCreate(osThread(pc2dev), NULL);
-    osThreadCreate(osThread(dev2pc), NULL);
-    // main routine
-    int count = 0;
-    while(true) {
-        ser.printf( "Time passed %4d [sec]\r\n", count++);
-        ThisThread::sleep_for(1000);
-    }
-}
-
-void pc2dev(void const *args)
-{
-    while(true) {
-        if (pc.readable()) {
-            dev.putc(pc.getc());
-        } else {
-            ThisThread::yield();
-        }
-    }
-}
-
-void dev2pc(void const *args)
-{
-    while(true) {
-        if (dev.readable()) {
-            pc.putc(dev.getc());
-        } else {
-            ThisThread::yield();
-        }
-    }
-}
-
-#endif //#ifdef EXAMPLE_3
\ No newline at end of file

--- a/BufferedSoftSerial.lib	Sun May 10 08:15:36 2020 +0000
+++ b/BufferedSoftSerial.lib	Tue May 12 05:44:33 2020 +0000
@@ -1,1 +1,1 @@
-https://os.mbed.com/users/kenjiArai/code/BufferedSoftSerial/#f186cc69acdf
+https://os.mbed.com/users/kenjiArai/code/BufferedSoftSerial/#7ab9ab7210e7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue May 12 05:44:33 2020 +0000
@@ -0,0 +1,96 @@
+/*
+ * Mbed Application program
+ *  SoftSerial(also BufferedSoftSerial) function test programs
+ *  UART 2 channels
+ *      (1) Mbed Serial communication line as "pc"
+ *      (2) Software Serial channel as "dev"
+ *
+ * Copyright (c) 2020 Kenji Arai / JH1PJL
+ *  http://www7b.biglobe.ne.jp/~kenjia/
+ *  https://os.mbed.com/users/kenjiArai/
+ *      Created:    May        9th, 2020
+ *      Revised:    May       12th, 2020
+ */
+
+/*
+    Tested board on OS5.15.3
+        Nucleo-L152RE,
+        Nucleo-F401RE, -F411RE, -F446RE,
+        Nucleo-L432KC, -L476RG
+        FRDM-K64F
+        
+    CAUTION!!
+        Due to bug inside TimerEvent, not stable on STM32 series Mbed
+        at this moment.
+        FRDM-K40 works fine(no trouble TimerEvent function).
+ */
+
+//  Include --------------------------------------------------------------------
+#include "mbed.h"
+#include "BufferedSoftSerial.h"
+
+//  Definition -----------------------------------------------------------------
+#define BAUD    9600
+//#define BAUD    14400
+//#define BAUD    19200  // No continuous transmission           
+//#define BAUD    38400  // NOT SUCCESS!!
+
+//  Constructor ----------------------------------------------------------------
+#if defined(TARGET_NUCLEO_L432KC)
+DigitalOut test_point(D12);
+Serial ser(D5, D4, BAUD);
+BufferedSoftSerial dev(D6,D3);
+#else
+DigitalOut test_point(A0);
+BufferedSoftSerial dev(D4,D3);
+#endif
+Serial pc(USBTX,USBRX, BAUD);
+
+//  RAM ------------------------------------------------------------------------
+
+//  ROM / Constant data --------------------------------------------------------
+
+//  Function prototypes --------------------------------------------------------
+void pc2dev(void const *args);
+void dev2pc(void const *args);
+
+//------------------------------------------------------------------------------
+//  Control Program
+//------------------------------------------------------------------------------
+osThreadDef(pc2dev, osPriorityNormal,1024);
+osThreadDef(dev2pc, osPriorityNormal,1024);
+
+int main()
+{
+    dev.baud(BAUD);
+    // Start tasks
+    osThreadCreate(osThread(pc2dev), NULL);
+    osThreadCreate(osThread(dev2pc), NULL);
+    while(true) {
+        ThisThread::sleep_for(1000000);
+    }
+}
+
+void pc2dev(void const *args)
+{
+    pc.printf("\r\nStart program\r\n");
+    while(true) {
+        if (pc.readable()) {
+            dev.putc(pc.getc());
+        } else {
+            ThisThread::yield();
+        }
+    }
+}
+
+void dev2pc(void const *args)
+{
+    dev.printf("\r\nStart program\r\n");
+    while(true) {
+        if (dev.readable()) {
+            pc.putc(dev.getc());
+        } else {
+            ThisThread::yield();
+        }
+    }
+}

--- a/select_example.h	Sun May 10 08:15:36 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,25 +0,0 @@
-/*
- * Mbed Application program
- *  SoftSerial(also BufferedSoftSerial) function test programs
- *
- * Copyright (c) 2020 Kenji Arai / JH1PJL
- *  http://www7b.biglobe.ne.jp/~kenjia/
- *  https://os.mbed.com/users/kenjiArai/
- *      Created:    May        9th, 2020
- *      Revised:    May       10th, 2020
- */
-
-#define EXAMPLE_NUMBER      0       // select 0 to 3
-
-//----------------- You don't need any modification ----------------------------
-#if EXAMPLE_NUMBER   == 0
-#   define EXAMPLE_0
-#elif EXAMPLE_NUMBER == 1
-#   define EXAMPLE_1
-#elif EXAMPLE_NUMBER == 2
-#   define EXAMPLE_2
-#elif EXAMPLE_NUMBER == 3
-#   define EXAMPLE_3
-#else
-#   error " Please set 0 to 3 number for EXAMPLE_NUMBER!!"
-#endif
\ No newline at end of file