Kenji Arai
Check Deepsleep mode on OS6.6.0
You are viewing an older revision! See the latest version
Homepage
/users/kenjiArai/notebook/standby-mode-current-consumption-on-nucleo-f446re/
| IDD Jumper(JP6) | ||||
| Mode | Mbed-OS | Board | IDD Current(sleep) | IDD Current(Normal(*1)) |
| DeepSleep | 0s5.15.1 | Nucleo-L152RE | 4.23uA | 5mA to 8mA |
| ^ | 0s6.6.0 | ^ | 4.22uA | 4mA to 7mA |
| StandBy | 0s5.15.1 | ^ | 3.90uA | 4mA to 7mA |
| ^ | 0s6.6.0 | ^ | 3.90uA | 4mA to 7mA |
| DeepSleep | 0s5.15.1 | Nucleo-L476RG | 2.13uA | 7mA to 10mA |
| ^ | 0s6.6.0 | ^ | 2.23uA | 7mA to 10mA |
| StandBy | 0s5.15.1 | ^ | -uA(*2) | -mA(*2) |
| ^ | 0s6.6.0 | ^ | -uA(*2) | -mA(*2) |
| DeepSleep | 0s5.15.1 | Nucleo-F411RE | 1.91mA(*3) | 7mA to 10mA |
| ^ | 0s6.6.0 | ^ | 1.65mA(*3) | 7mA to 10mA |
| StandBy | 0s5.15.1 | ^ | 3.35uA | 7mA to 10mA |
| ^ | 0s6.6.0 | ^ | 3.40uA | 7mA to 9mA |
| DeepSleep | 0s5.15.1 | Nucleo-F446RE | 1.67mA(*3) | 14mA to 17mA |
| ^ | 0s6.6.0 | ^ | 1.76mA(*3) | 14mA to 16mA |
| StandBy | 0s5.15.1 | ^ | 3.42uA | 14mA to 17mA |
| ^ | 0s6.6.0 | ^ | 3.42uA | 14mA to 16mA |
- 1-> LED1 Blinky every 1sec and change LED1 current
- 2-> Could NOT make proper program and could NOT measure
- 3-> NOT uA but mA
All Nucleo boards are stand alone condition(not additional circuit).
Equitment: DMM6500
/users/kenjiArai/code/Check_DeepSleep_os5/
/users/kenjiArai/code/Check_DeepSleep_os6/
/users/kenjiArai/code/Check_StandBy_os5/
/users/kenjiArai/code/Check_StandBy_os6/