Kenji Arai
this is a new program based on BLE_Uart_Peripheral. Change program name due to relation Client&Peripheral to Client&Server
Dependencies: RingBuffer nRF51_Vdd nRF51_WakeUp
This is a BLE Server (Device) program for nRF51.
You can communicate with mbed BLE using "BLE_Uart_Client" program as follows.
/users/kenjiArai/code/BLE_Uart_Client/
Please refer following my notebook.
/users/kenjiArai/notebook/ble-client-and-peripheral-using-switch-sience-ty51/#
Revision 2:2322afea6ecf, committed 2016-04-16
- Comitter:
- kenjiArai
- Date:
- Sat Apr 16 22:01:45 2016 +0000
- Parent:
- 1:9b27a9710d94
- Child:
- 3:fd5273a70b21
- Commit message:
- Show MAC address to modify Client main.cpp program
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
--- a/main.cpp Sat Apr 16 12:12:59 2016 +0000
+++ b/main.cpp Sat Apr 16 22:01:45 2016 +0000
@@ -22,7 +22,7 @@
* http://mbed.org/users/kenjiArai/
*
* Started: March 7th, 2016
- * Revised: April 16th, 2016
+ * Revised: April 17th, 2016
*
* Original program:
* BLE_LoopbackUART
@@ -65,6 +65,7 @@
const char *deviceName = "UART_P";
// RAM -------------------------------------------------------------------------------------------
+Gap::Address_t my_mac;
uint8_t tx_buf[24];
uint8_t tx_len = 0;
uint8_t rx_buf[24];
@@ -112,6 +113,18 @@
// Interrupt by switch
wake_up_sw.fall(&interrupt_by_sw);
ble.init();
+ Gap::AddressType_t my_mac_type;
+ ble.gap().getAddress(&my_mac_type, my_mac);
+ pc.printf(
+ " my_MAC %02x:%02x:%02x:%02x:%02x:%02x (%s)\r\n",
+ my_mac[5], my_mac[4], my_mac[3], my_mac[2], my_mac[1], my_mac[0],
+ (my_mac_type == Gap::ADDR_TYPE_PUBLIC) ? "public" : "random"
+ );
+ pc.printf(
+ " mac_board_? = {0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x};\r\n",
+ my_mac[0], my_mac[1], my_mac[2], my_mac[3], my_mac[4], my_mac[5]
+ );
+ pc.printf(" Please write above mac_board_?(?=1,2,...) data into Client main.cpp\r\n");
ble.setDeviceName((const uint8_t *)deviceName);
ble.onDisconnection(disconnectionCallback);
ble.onDataWritten(onDataWritten);
@@ -135,7 +148,7 @@
while(true){
if (time_out){
#if GOTO_SLEEP_MODE
- wakeup.set_and_wait(10);
+ wakeup.set_and_wait(120);
while(true){ // never come here but just in case
deepsleep();
}
@@ -201,7 +214,7 @@
}
void adjust_line(uint8_t *bf){
-uint8_t i, c;
+ uint8_t i, c;
for (i = 0; i <20; bf++, i++){
c = *bf;