Kenji Arai / Mbed OS BLE_UART_pin_assign

You can change UART pin assign. If you define ON_THREAD_MODE, you can use the UART two channels even available hardware channel is only one.

Fork of BLE_I2C_pin_assign by Kenji Arai

Files at this revision

API Documentation at this revision

Revision 1:f3511dc0569f, committed 2017-09-01

Comitter:
kenjiArai
Date:
Fri Sep 01 08:58:49 2017 +0000
Parent:
0:da7659112ca0
Commit message:
You can change UART pin assign.; If you define ON_THREAD_MODE, you can use the UART two channels even available hardware channel is only one.

Changed in this revision

TextLCD.lib Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed-os.lib Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show diff for this revision Revisions of this file 
diff -r da7659112ca0 -r f3511dc0569f TextLCD.lib
--- a/TextLCD.lib	Mon May 02 01:14:34 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://developer.mbed.org/users/wim/code/TextLCD/#111ca62e8a59

diff -r da7659112ca0 -r f3511dc0569f main.cpp
--- a/main.cpp	Mon May 02 01:14:34 2016 +0000
+++ b/main.cpp	Fri Sep 01 08:58:49 2017 +0000
@@ -1,56 +1,176 @@
 /*
- * mbed Application program
- *  ------- Test program for I2C pin assignment -----------------------------------------
- *      Tested on Switch Science mbed TY51822r3
- *      Tested LCD module AQM0802A-RN-GBW, Akizuki 8 characters X 2 lines
- *              http://akizukidenshi.com/catalog/g/gP-06669/
+ * Mbed Application program
+ *  ------- Test program for UART pin assignment -------
+ *   Tested on Switch Science Mbed TY51822r3
+ *
+ *   Copyright (c) 2016,'17 Kenji Arai / JH1PJL
+ *    http://www.page.sannet.ne.jp/kenjia/index.html
+ *    http://mbed.org/users/kenjiArai/
+ *      Created: May        3rd, 2016   // Base:BLE_I2C_pin_assign
+ *      Revised: September  1st, 2017
  *
- *      Copyright (c) 2016 Kenji Arai / JH1PJL
- *          http://www.page.sannet.ne.jp/kenjia/index.html
- *          http://mbed.org/users/kenjiArai/
- *              Created: May        2nd, 2016
- *              Revised: May        2nd, 2016
- *
+ */
+/*
+    /---------------------\
+    | nRF51822/TY51822r3  |
+    |                     |
+    |   UART TX(any pin)  |----------]  Direct connect TX and RX line
+    |                     |          |
+    |   UART RX(any pin)  |----------]
+    |                     |
+    \---------------------/
  */
 
-#include "mbed.h"
-#include "TextLCD.h"
+//  Include --------------------------------------------------------------------
+#include    "mbed.h"
 
-#define PIN_MODE   1   // 0 to 4
+//  Definition -----------------------------------------------------------------
+#define     ON_THREAD_MODE
+
+#define     PIN_MODE   4   // Select 1 to 5 for UART pin assign
 
-#if   (PIN_MODE == 0)
-I2C i2c(I2C_SDA0, I2C_SCL0);   // SDA, SCL
-#elif (PIN_MODE == 1)
-I2C i2c(P0_0, P0_1);
-#elif (PIN_MODE == 2)
-I2C i2c(P0_28, P0_29);
-#elif (PIN_MODE == 3)
-I2C i2c(P0_3, P0_2);
-#elif (PIN_MODE == 4)
-I2C i2c(P0_2, P0_3);
-#else
-I2C i2c(I2C_SDA0, I2C_SCL0);
-#endif
+//  Constructor ----------------------------------------------------------------
+#ifdef      ON_THREAD_MODE  // under some threads
+
+DigitalOut  myled(LED1);
+Thread      th0;
+Thread      th1;
+Mutex       mutex;
+
+#else       // ON_THREAD_MODE
 
-TextLCD_I2C_N   lcd(&i2c, ST7036_SA2, TextLCD::LCD8x2, NC, TextLCD::ST7032_3V3);
+DigitalOut myled(LED1);
+#if   (PIN_MODE == 0)
+Serial uart(USBTX, USBRX);
+#elif (PIN_MODE == 1)
+Serial uart(P0_0, P0_1);
+#elif (PIN_MODE == 2)
+Serial uart(P0_28, P0_29);
+#elif (PIN_MODE == 3)
+Serial uart(P0_3, P0_2);
+#elif (PIN_MODE == 4)
+Serial uart(P0_12, P0_13);
+#elif (PIN_MODE == 5)
+Serial uart(P0_23, P0_22);
+#else       // PIN_MODE
+Serial uart(USBTX, USBRX);
+#endif      // PIN_MODE
+
+#endif      // ON_THREAD_MODE
 
+//  RAM ------------------------------------------------------------------------
+volatile uint32_t number = 0;
+
+//  ROM / Constant data --------------------------------------------------------
+
+//  Function prototypes --------------------------------------------------------
+#ifdef      ON_THREAD_MODE  // under some threads
+
+void pc_com_thread(void);
+void uart_com_thread(void);
+
+#endif      // ON_THREAD_MODE
+
+//------------------------------------------------------------------------------
+//  Control Program on RTOS(mbed-os5)
+//------------------------------------------------------------------------------
+#ifdef      ON_THREAD_MODE  // under some threads
+
+#warning "you are selecting this main function"
 int main() {
-    lcd.setCursor(TextLCD::CurOff_BlkOff);
-    lcd.locate(0, 0);    // 1st line top
-    //          12345678
-    lcd.printf("TY51822r");
-    lcd.locate(0, 1);    // 2nd line top
-    //        12345678
-    lcd.puts("Test I2C");
-    lcd.setContrast(0x14);
-    wait(3.0);
-    uint32_t n = 0;
-    uint8_t  num = PIN_MODE;
-    while(1) {
-        lcd.locate(n%8, 1);    // 2nd line top
-        lcd.printf("*.......");
-        lcd.locate(0, 0);    // 1st line top
-        lcd.printf("%u: %5u", num, n++);
-        wait(1.0); 
+    th0.start(pc_com_thread);
+    th1.start(uart_com_thread);
+    while(true) {
+        Thread::wait(osWaitForever);
     }
 }
+
+void uart_com_thread()
+{
+#if   (PIN_MODE == 1)
+    Serial uart(P0_0,  P0_1);
+#elif (PIN_MODE == 2)
+    Serial uart(P0_28, P0_29);
+#elif (PIN_MODE == 3)
+    Serial uart(P0_3,  P0_2);
+#elif (PIN_MODE == 4)
+    Serial uart(P0_12, P0_13);
+#elif (PIN_MODE == 5)
+    Serial uart(P0_14, P0_15;
+#else
+#error "Please select 1 to 5 for PIN_MODE"
+#endif
+    // If you see LED blinking, you may have an error.
+    while(true){
+        for (char c = '!'; c < '~'; c++){
+            mutex.lock();
+            uart.putc(c);
+            Thread::wait(5);           // 5 mS
+            while (uart.readable() == 0){;} // wait for loopback
+            if (uart.getc() == c){
+                ++number;
+                myled = 0;
+            } else {
+                myled = 1;
+                Thread::wait(10);
+                myled = 0;
+            }
+            mutex.unlock();
+        }
+        Thread::wait(100);     // 100 mS
+    }
+}
+
+void pc_com_thread()
+{
+    uint32_t n = 0;
+
+    while(true){
+        mutex.lock();
+        Serial pc(USBTX, USBRX);
+        pc.printf("test(uart1_thread) %d\r\n", n++);
+        pc.printf("total number of TX&RX communication %d\r\n", number); 
+#if   (PIN_MODE == 1)
+        Serial uart(P0_0,  P0_1);
+#elif (PIN_MODE == 2)
+        Serial uart(P0_28, P0_29);
+#elif (PIN_MODE == 3)
+        Serial uart(P0_3,  P0_2);
+#elif (PIN_MODE == 4)
+        Serial uart(P0_12, P0_13);
+#elif (PIN_MODE == 5)
+        Serial uart(P0_14, P0_15;
+#else
+#error "Please select 1 to 5 for PIN_MODE"
+#endif
+        mutex.unlock();
+        Thread::wait(5000);     // 5 sec
+    }
+}
+
+//------------------------------------------------------------------------------
+//  Control Program as none RTOS mode
+//------------------------------------------------------------------------------
+#else       // ON_THREAD_MODE
+
+#warning "You are selecting this main function"
+// If you see LED blinking, you may have an error.
+int main() {
+    while(true) {
+        for (char c = '!'; c < '~'; c++){
+            uart.putc(c);
+            while (uart.readable() != 0){
+                myled = !myled;
+                wait(0.2f);
+            }
+            if (uart.getc() == c){
+                myled = 0;
+            } else {
+                myled = !myled;
+            }
+            wait(0.01f);
+        } 
+    }
+}
+
+#endif      // ON_THREAD_MODE

diff -r da7659112ca0 -r f3511dc0569f mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Fri Sep 01 08:58:49 2017 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#98ba8acb83cfc65f30a8a0771a27c71443ab093a

diff -r da7659112ca0 -r f3511dc0569f mbed.bld
--- a/mbed.bld	Mon May 02 01:14:34 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/aae6fcc7d9bb
\ No newline at end of file