Digital 16bit Serial Output Type Ambient Light Sensor IC by ROHM, Ambient light sensor (Illuminance to digital converter)
BH1750.cpp
- Committer:
- kenjiArai
- Date:
- 2015-03-07
- Revision:
- 0:d95f6ac4c8d6
- Child:
- 1:4a02a8fbf021
File content as of revision 0:d95f6ac4c8d6:
/* * mbed library program * light intensity sensor module with built-in a 16 bit AD converter generating digital signal. * BH1750 by ROHM Co.,Ltd. * * Copyright (c) 2015 Kenji Arai / JH1PJL * http://www.page.sannet.ne.jp/kenjia/index.html * http://mbed.org/users/kenjiArai/ * Created: March 7th, 2015 * Revised: March 8th, 2015 * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "BH1750.h" BH1750::BH1750 (PinName p_sda, PinName p_scl) : _i2c(p_sda, p_scl) { BH1750_addr = BH1750_G_CHIP_ADDR; init(); } BH1750::BH1750 (PinName p_sda, PinName p_scl, uint8_t addr) : _i2c(p_sda, p_scl) { BH1750_addr = addr; init(); } BH1750::BH1750 (I2C& p_i2c) : _i2c(p_i2c) { BH1750_addr = BH1750_G_CHIP_ADDR; init(); } BH1750::BH1750 (I2C& p_i2c, uint8_t addr) : _i2c(p_i2c) { BH1750_addr = addr; init(); } /////////////// Read Lux from sensor ////////////////////// float BH1750::lux() { float lux; _i2c.read(BH1750_addr, (char *)dt, 2, false); lux = (float)(dt[0] << 8 | dt[1]); lux = lux / 1.2 * ((float)sensitivity/69); return lux; } /////////////// Initialize //////////////////////////////// void BH1750::init() { _i2c.frequency(100000); power_up(); sensitivity = SENS_1R00; set_sensitivity(sensitivity); } /////////////// Timing Register /////////////////////////// void BH1750::set_sensitivity(uint8_t parameter) { if (parameter > SENS_3R68){ parameter = SENS_3R68; } else if (parameter < SENS_0R45){ parameter = SENS_0R45; } dt[0] = CMD_M_TIME_H | (parameter >> 5); // Set High byte _i2c.write((int)BH1750_addr, (char *)dt, 1, false); dt[0] = CMD_M_TIME_L | (parameter & 0x1f); // Set Low byte _i2c.write((int)BH1750_addr, (char *)dt, 1, false); dt[0] = CMD_C_H_RES_M; // Measurement mode: High Resolution _i2c.write((int)BH1750_addr, (char *)dt, 1, false); wait_ms(240); // need normal conversion time(120mS) x 2 } /////////////// Power ON/OFF ////////////////////////////// void BH1750::power_up() { dt[0] = CMD_PWR_UP; _i2c.write((int)BH1750_addr, (char *)dt, 1, false); } void BH1750::power_down() { dt[0] = CMD_PWR_DWN; _i2c.write((int)BH1750_addr, (char *)dt, 1, false); } /////////////// I2C Freq. ///////////////////////////////// void BH1750::frequency(int hz) { _i2c.frequency(hz); }