Arduino board run on Mbed-os6.8.1 (only test purpose not official). Need Mbed Studio(1.3.1) not online compiler. If you compile on the online compiler, you can get a hex file but it does NOT work!!!
Dependencies: APDS_9960 LPS22HB LSM9DS1 HTS221
1) DAPLink(LPC11U35)の準備
使用したボード →https://akizukidenshi.com/catalog/g/gK-12144/
プログラムは、nRF52840-MDK用に公開されているDAPLinkのコンパイル済のバイナリコードを使わせていただきました。
https://github.com/makerdiary/nrf52840-mdk/tree/master/firmware/daplink
LPC11U35への書込みは、SW1(ISP)を押したままSW2(RESET)を操作するとPCに「CRP DISABLD」という名称でマウントされるので、書込まれているfirmware.binを削除してから、上記のbinファイルをコピーすれば書き込みが行われます。
書込み完了後にSW1を押さずに起動すれば、「DAPLINK」として認識されます。
DETAILS.TXTでDAPLinkの内容を確認できます。
2) 接続
Arduino Nano 33 BLE Sense | LPC11U35 Interface CPU | コメント |
J3:Pin2 (ボード裏のパッド) | CN1:Pin3 P0_7 | SWDIO |
J3:Pin3 (ボード裏のパッド) | CN1:Pin4 P0_8 | SWCLK |
JP2:Pin14 GND | CN2:Pin1 GND | GND |
3)USBSerial
シリアル出力は、NANO 33 BLE SENSEボードのUSB端子経由で出力されます。
4)Mbed Studio 1.3.1を使って開発のこと!(オンラインコンパイラでは動作しません!)
5)ボードピン配置
common_functions/nano33blesense_iodef.h
- Committer:
- kenjiArai
- Date:
- 2021-02-28
- Revision:
- 2:9ee17e6e5900
- Parent:
- 1:cce280da16d4
File content as of revision 2:9ee17e6e5900:
/* * Nano 33 BLE Sense * Arudiono nRF52840 module * * Copyright (c) 2020,'21 Kenji Arai / JH1PJL * http://www7b.biglobe.ne.jp/~kenjia/ * https://os.mbed.com/users/kenjiArai/ * Started: January 22nd, 2020 * Revised: February 28th, 2021 * */ // LEDs #define PIN_YELLOW P0_13 #define PIN_GREEN P1_9 #define PIN_LR P0_24 #define PIN_LG P0_16 #define PIN_LB P0_6 // APDS-9960 #define PIN_APDS_INT P0_19 // SPI #define PIN_SPI_MOSI P1_1 #define PIN_SPI_MISO P1_8 #define PIN_SPI_SCK P0_13 // External I2C #define PIN_EXT_SDA P0_31 #define PIN_EXT_SCL P0_2 // Internal I2C #define PIN_SDA1 P0_14 #define PIN_SCL1 P0_15 // Power line control #define PIN_I2C_PULLUP P1_0 #define PIN_VDD_ENV P0_22 #define PIN_APDS_PWR P0_20 #define PIN_MIC_PWR P0_17 //-------- Reference -------------------------------------------------- #if 0 https://github.com/arduino/ArduinoCore-nRF528x-mbedos \variants\ARDUINO_NANO33BLE\variant.cpp & \variants\ARDUINO_NANO33BLE\pins_arduino.h // D0 - D7 P1_3, 0 P1_10, 1 P1_11, 2 P1_12, 3 P1_15, 4 P1_13, 5 P1_14, 6 P0_23, 7 // D8 - D13 P0_21, 8 P0_27, 9 P1_2, 10 PIN_SPI_SS (10u) P1_1, 11 PIN_SPI_MOSI (11u) P1_8, 12 PIN_SPI_MISO (12u) P0_13, 13 LED_BUILTIN (13u) / PIN_SPI_SCK (13u) // A0 - A7 P0_4, 14 PIN_A0 (14u) P0_5, 15 PIN_A1 (15u) P0_30, 16 PIN_A2 (16u) P0_29, 17 PIN_A3 (17u) P0_31, 18 PIN_A4 (18u) / PIN_WIRE_SDA (18u) P0_2, 19 PIN_A5 (19u) / PIN_WIRE_SCL (19u) P0_28, 20 PIN_A6 (20u) P0_3, 21 PIN_A7 (21u) // LEDs P0_24, 22 LEDR (22u) P0_16, 23 LEDG (23u) P0_6, 24 LEDB (24u) P1_9, 25 LED_PWR (25u) P0_19, 26 PIN_INT_APDS (26u) // PDM P0_17, 27 PIN_PDM_PWR (27) P0_26, 28 PIN_PDM_CLK (28) P0_25, 29 PIN_PDM_DIN (29) // Internal I2C P0_14, 30 PIN_WIRE_SDA1 (30u) P0_15, 31 PIN_WIRE_SCL1 (31u) // Internal I2C P1_0, 32 PIN_ENABLE_SENSORS_3V3 (32u) P0_22, 33 PIN_ENABLE_I2C_PULLUP (33u) #endif