Kenji Arai / Mbed OS Arduino_Nano33BLESense_examples

Arduino board run on Mbed-os6.8.1 (only test purpose not official). Need Mbed Studio(1.3.1) not online compiler. If you compile on the online compiler, you can get a hex file but it does NOT work!!!

Dependencies:   APDS_9960 LPS22HB LSM9DS1 HTS221

1) DAPLink(LPC11U35)の準備
 使用したボード →https://akizukidenshi.com/catalog/g/gK-12144/
プログラムは、nRF52840-MDK用に公開されているDAPLinkのコンパイル済のバイナリコードを使わせていただきました。
https://github.com/makerdiary/nrf52840-mdk/tree/master/firmware/daplink
LPC11U35への書込みは、SW1(ISP)を押したままSW2(RESET)を操作するとPCに「CRP DISABLD」という名称でマウントされるので、書込まれているfirmware.binを削除してから、上記のbinファイルをコピーすれば書き込みが行われます。
書込み完了後にSW1を押さずに起動すれば、「DAPLINK」として認識されます。
DETAILS.TXTでDAPLinkの内容を確認できます。

2) 接続

Arduino Nano 33 BLE SenseLPC11U35 Interface CPUコメント
J3:Pin2 (ボード裏のパッド)CN1:Pin3 P0_7SWDIO
J3:Pin3 (ボード裏のパッド)CN1:Pin4 P0_8SWCLK
JP2:Pin14 　GNDCN2:Pin1 GNDGND

https://os.mbed.com/media/uploads/kenjiArai/snano_daplink.jpg https://os.mbed.com/media/uploads/kenjiArai/snano33ble_bottom.jpg
3)USBSerial
シリアル出力は、NANO 33 BLE SENSEボードのUSB端子経由で出力されます。

4)Mbed Studio 1.3.1を使って開発のこと！(オンラインコンパイラでは動作しません!)
https://os.mbed.com/media/uploads/kenjiArai/s1_2020-02-13.png https://os.mbed.com/media/uploads/kenjiArai/s2_2020-02-13.png

5)ボードピン配置 https://os.mbed.com/media/uploads/kenjiArai/nano33ble_pin.png

select_example.h@1:cce280da16d4, 2021-02-28 (annotated)

Committer:
kenjiArai
Date:
Sun Feb 28 07:31:58 2021 +0000
Revision:
1:cce280da16d4
Parent:
0:f1a10797d9f6
Child:
2:9ee17e6e5900
run on mbed-os6.8.0 (compile on Mbed Studio 1.3.1)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
kenjiArai 0:f1a10797d9f6 1 /*
kenjiArai 0:f1a10797d9f6 2 * Mbed Application program
kenjiArai 1:cce280da16d4 3 * Nano 33 BLE Sense board runs on mbed-OS6
kenjiArai 0:f1a10797d9f6 4 *
kenjiArai 1:cce280da16d4 5 * Copyright (c) 2020,'21 Kenji Arai / JH1PJL
kenjiArai 0:f1a10797d9f6 6 * http://www7b.biglobe.ne.jp/~kenjia/
kenjiArai 0:f1a10797d9f6 7 * https://os.mbed.com/users/kenjiArai/
kenjiArai 0:f1a10797d9f6 8 * Started: January 22nd, 2020
kenjiArai 1:cce280da16d4 9 * Revised: February 28th, 2021
kenjiArai 0:f1a10797d9f6 10 */
kenjiArai 0:f1a10797d9f6 11
kenjiArai 0:f1a10797d9f6 12 /*
kenjiArai 0:f1a10797d9f6 13 You can select several examples as followings.
kenjiArai 0:f1a10797d9f6 14 0. 0_Blinky_LED
kenjiArai 0:f1a10797d9f6 15 LED Blinky
kenjiArai 0:f1a10797d9f6 16 1. 1_check_I2C_devices
kenjiArai 0:f1a10797d9f6 17 Check sensors connected to I2C line
kenjiArai 0:f1a10797d9f6 18 2. 2_check_LSM9DS1
kenjiArai 0:f1a10797d9f6 19 iNEMO inertial module:3D accelerometer, 3D gyroscope, 3D magnetometer
kenjiArai 0:f1a10797d9f6 20 3. 3_check_LPS22HB
kenjiArai 0:f1a10797d9f6 21 MEMS nano pressure sensor:260-1260 hPa absolute Digital output barometer
kenjiArai 0:f1a10797d9f6 22 4. 4_check_HTS221
kenjiArai 0:f1a10797d9f6 23 Capacitive digital sensor for relative humidity and temperature
kenjiArai 0:f1a10797d9f6 24 5. 5_Combined_enviromental_sensors
kenjiArai 0:f1a10797d9f6 25 Demonstration sample program SD Card
kenjiArai 0:f1a10797d9f6 26 6. 6_check_APDS_9960
kenjiArai 0:f1a10797d9f6 27 Digital Proximity, Ambient Light, RGB and Gesture Sensor
kenjiArai 0:f1a10797d9f6 28
kenjiArai 0:f1a10797d9f6 29 -> PLEASE SET VCOM BAUDRATE IS 115200
kenjiArai 0:f1a10797d9f6 30 */
kenjiArai 0:f1a10797d9f6 31 #define EXAMPLE_NUMBER 0 // select 0 to 6
kenjiArai 0:f1a10797d9f6 32
kenjiArai 0:f1a10797d9f6 33 //----------------- You don't need any modification ----------------------------
kenjiArai 0:f1a10797d9f6 34 #if EXAMPLE_NUMBER == 0
kenjiArai 0:f1a10797d9f6 35 # define EXAMPLE_0_BLINKY_LED
kenjiArai 0:f1a10797d9f6 36 # warning "Select 0_Blinky_LED"
kenjiArai 0:f1a10797d9f6 37 #elif EXAMPLE_NUMBER == 1
kenjiArai 0:f1a10797d9f6 38 # define EXAMPLE_1_CHECK_I2C_DEVICES
kenjiArai 0:f1a10797d9f6 39 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 40 # warning "Select 1_Check_I2C_devices"
kenjiArai 0:f1a10797d9f6 41 #elif EXAMPLE_NUMBER == 2
kenjiArai 0:f1a10797d9f6 42 # define EXAMPLE_2_CHECK_LSM9DS1
kenjiArai 0:f1a10797d9f6 43 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 44 # warning "Select 2_check_LSM9DS1"
kenjiArai 0:f1a10797d9f6 45 #elif EXAMPLE_NUMBER == 3
kenjiArai 0:f1a10797d9f6 46 # define EXAMPLE_3_CHECK_LPS22HB
kenjiArai 0:f1a10797d9f6 47 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 48 # warning "Select 3_check_LPS22HB"
kenjiArai 0:f1a10797d9f6 49 #elif EXAMPLE_NUMBER == 4
kenjiArai 0:f1a10797d9f6 50 # define EXAMPLE_4_CHECK_HTS221
kenjiArai 0:f1a10797d9f6 51 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 52 # warning "Select 4_check_HTS221"
kenjiArai 0:f1a10797d9f6 53 #elif EXAMPLE_NUMBER == 5
kenjiArai 0:f1a10797d9f6 54 # define EXAMPLE_5_COMB_ENV_SENSORS
kenjiArai 0:f1a10797d9f6 55 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 56 # warning "Select 5_Combined_enviromental_sensors"
kenjiArai 0:f1a10797d9f6 57 #elif EXAMPLE_NUMBER == 6
kenjiArai 0:f1a10797d9f6 58 # define EXAMPLE_6_CHECK_APDS_9960
kenjiArai 0:f1a10797d9f6 59 # define USE_COMMON_FUNCTION
kenjiArai 0:f1a10797d9f6 60 # warning "Select 6_check_APDS_9960"
kenjiArai 0:f1a10797d9f6 61 #else
kenjiArai 0:f1a10797d9f6 62 # error " Please set 0 to 6 number for EXAMPLE_NUMBER!!"
kenjiArai 0:f1a10797d9f6 63 #endif