Diff: targets/hal/TARGET_STM/TARGET_STM32L1/analogin_api.c

Revision:

496:543871686697

Parent:

414:4ec4c5b614b0

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/analogin_api.c	Tue Mar 24 09:00:08 2015 +0000
@@ -0,0 +1,193 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+int adc_inited = 0;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+
+    // Get the peripheral name from the pin and assign it to the object
+    obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+
+    MBED_ASSERT(obj->adc != (ADCName)NC);
+
+    // Configure GPIO
+    pinmap_pinout(pin, PinMap_ADC);
+
+    // Save pin number for the read function
+    obj->pin = pin;
+
+    // The ADC initialization is done once
+    if (adc_inited == 0) {
+        adc_inited = 1;
+
+        // Enable the HSI (to clock the ADC)
+        RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+        RCC_OscInitStruct.HSIState       = RCC_HSI_ON;
+        RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE;
+        HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+        AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+        // Enable ADC clock
+        __ADC1_CLK_ENABLE();
+
+        // Configure ADC
+        AdcHandle.Init.ClockPrescaler        = ADC_CLOCK_ASYNC_DIV4;
+        AdcHandle.Init.Resolution            = ADC_RESOLUTION12b;
+        AdcHandle.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
+        AdcHandle.Init.ScanConvMode          = DISABLE;                       // Sequencer disabled (ADC conversion on only 1 channel: channel set on rank 1)
+        AdcHandle.Init.EOCSelection          = EOC_SINGLE_CONV;               // On STM32L1xx ADC, overrun detection is enabled only if EOC selection is set to each conversion (or transfer by DMA enabled, this is not the case in this example).
+        AdcHandle.Init.LowPowerAutoWait      = ADC_AUTOWAIT_UNTIL_DATA_READ;  // Enable the dynamic low power Auto Delay: new conversion start only when the previous conversion (for regular group) or previous sequence (for injected group) has been treated by user software.
+        AdcHandle.Init.LowPowerAutoPowerOff  = ADC_AUTOPOWEROFF_IDLE_PHASE;   // Enable the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
+        AdcHandle.Init.ChannelsBank          = ADC_CHANNELS_BANK_A;
+        AdcHandle.Init.ContinuousConvMode    = DISABLE;                       // Continuous mode disabled to have only 1 conversion at each conversion trig
+        AdcHandle.Init.NbrOfConversion       = 1;                             // Parameter discarded because sequencer is disabled
+        AdcHandle.Init.DiscontinuousConvMode = DISABLE;                       // Parameter discarded because sequencer is disabled
+        AdcHandle.Init.NbrOfDiscConversion   = 1;                             // Parameter discarded because sequencer is disabled
+        AdcHandle.Init.ExternalTrigConv      = 0;                             // Not used
+        AdcHandle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
+        AdcHandle.Init.DMAContinuousRequests = DISABLE;
+        HAL_ADC_Init(&AdcHandle);
+    }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+    ADC_ChannelConfTypeDef sConfig;
+
+    AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+    // Configure ADC channel
+    switch (obj->pin) {
+        case PA_0:
+            sConfig.Channel = ADC_CHANNEL_0;
+            break;
+        case PA_1:
+            sConfig.Channel = ADC_CHANNEL_1;
+            break;
+        case PA_2:
+            sConfig.Channel = ADC_CHANNEL_2;
+            break;
+        case PA_3:
+            sConfig.Channel = ADC_CHANNEL_3;
+            break;
+        case PA_4:
+            sConfig.Channel = ADC_CHANNEL_4;
+            break;
+        case PA_5:
+            sConfig.Channel = ADC_CHANNEL_5;
+            break;
+        case PA_6:
+            sConfig.Channel = ADC_CHANNEL_6;
+            break;
+        case PA_7:
+            sConfig.Channel = ADC_CHANNEL_7;
+            break;
+        case PB_0:
+            sConfig.Channel = ADC_CHANNEL_8;
+            break;
+        case PB_1:
+            sConfig.Channel = ADC_CHANNEL_9;
+            break;
+        case PC_0:
+            sConfig.Channel = ADC_CHANNEL_10;
+            break;
+        case PC_1:
+            sConfig.Channel = ADC_CHANNEL_11;
+            break;
+        case PC_2:
+            sConfig.Channel = ADC_CHANNEL_12;
+            break;
+        case PC_3:
+            sConfig.Channel = ADC_CHANNEL_13;
+            break;
+        case PC_4:
+            sConfig.Channel = ADC_CHANNEL_14;
+            break;
+        case PC_5:
+            sConfig.Channel = ADC_CHANNEL_15;
+            break;
+        case PB_12:
+            sConfig.Channel = ADC_CHANNEL_18;
+            break;
+        case PB_13:
+            sConfig.Channel = ADC_CHANNEL_19;
+            break;
+        case PB_14:
+            sConfig.Channel = ADC_CHANNEL_20;
+            break;
+        case PB_15:
+            sConfig.Channel = ADC_CHANNEL_21;
+            break;
+        default:
+            return 0;
+    }
+
+    sConfig.Rank         = ADC_REGULAR_RANK_1;
+    sConfig.SamplingTime = ADC_SAMPLETIME_16CYCLES;
+
+    HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
+
+    HAL_ADC_Start(&AdcHandle); // Start conversion
+
+    // Wait end of conversion and get value
+    if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
+        return (HAL_ADC_GetValue(&AdcHandle));
+    } else {
+        return 0;
+    }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+    uint16_t value = adc_read(obj);
+    // 12-bit to 16-bit conversion
+    value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+    return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+    uint16_t value = adc_read(obj);
+    return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif