Jurica Resetar
A simple example for analog input and EPD usage.
Dependencies: GDEP015OC1 acn_nrf52_saadc aconno_bsp
Fork of
acd52832_3_Analog_In
by 
aconno dev team
Embed:
(wiki syntax)
Show/hide line numbers
main.cpp
00001 /* 00002 * Copyright (c) 2017 Aconno. All Rights Reserved. 00003 * 00004 * Licensees are granted free, non-transferable use of the information. NO 00005 * WARRANTY of ANY KIND is provided. This heading must NOT be removed from 00006 * the file. 00007 */ 00008 00009 #include "mbed.h" 00010 #include "acd52832_bsp.h" 00011 #include "GDEP015OC1.h" 00012 #include "pictures.h" 00013 #include "acd_nrf52_saadc.h" 00014 00015 #define DEBUG (1) 00016 #define ADC_MAX_VALUE (8192) 00017 #define ADC_REF_VOLTAGE (3.3f) 00018 #define VOLTAGE_DIVIDER_RATION (7.0606) 00019 #define VOLTAGE_LOSS (0.4) 00020 #define CURRENT_FACTOR (36.0) 00021 #define BATTERY_CHARGED_V (13) 00022 #define BATTERY_MAX_V (12.6) 00023 #define BATTERY_MIN_V (11.85) 00024 #define BATTERY_STEP (0.15) 00025 #define QUICK_CURRENT (float)(0.8) 00026 #define LOW_CURRENT (float)(0.4) 00027 #define NO_CURRENT (float)(0.01) 00028 #define NUM_OF_MEASUREMENTS (1) 00029 #define NO_CURRENT_STATE (0) 00030 #define LOW_CURRENT_STATE (1) 00031 #define QUICK_CURRENT_STATE (2) 00032 00033 #define _CH_4 (9) 00034 #define _CH_3 (8) 00035 #define _CH_2 (7) 00036 #define _CH_1 (6) 00037 #define _BS_5 (5) 00038 #define _BS_4 (4) 00039 #define _BS_3 (3) 00040 #define _BS_2 (2) 00041 #define _BS_1 (1) 00042 #define _BS_E (0) 00043 00044 #define ANALOG_PIN_P (4) 00045 #define ANALOG_PIN_N (5) 00046 #define NUM_OF_DIFF_ADCs (1) 00047 00048 SPI spi(PIN_EPD_MOSI, NC, PIN_EPD_SCK, NC); 00049 GDEP015OC1 epd = GDEP015OC1(spi, PIN_EPD_CS, PIN_EPD_DC, PIN_EPD_RST, PIN_EPD_BUSY); 00050 00051 uint8_t get_battery_level(float battery_voltage){ 00052 if (battery_voltage > BATTERY_CHARGED_V * 4){ 00053 return _CH_4; 00054 } 00055 else if ((battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 3) && (battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 4)){ 00056 return _CH_3; 00057 } 00058 else if ((battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 2) && (battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 3)){ 00059 return _CH_2; 00060 } 00061 else if ((battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 1) && (battery_voltage > BATTERY_CHARGED_V + BATTERY_STEP * 2)){ 00062 return _CH_1; 00063 } 00064 else if((battery_voltage > BATTERY_MAX_V - BATTERY_STEP) && (battery_voltage < BATTERY_CHARGED_V)){ 00065 return _BS_5; 00066 } 00067 else if((battery_voltage > BATTERY_MAX_V - BATTERY_STEP * 2) && (battery_voltage < BATTERY_MAX_V - BATTERY_STEP * 1)){ 00068 return _BS_4; 00069 } 00070 else if((battery_voltage > BATTERY_MAX_V - BATTERY_STEP * 3) && (battery_voltage < BATTERY_MAX_V - BATTERY_STEP * 2)){ 00071 return _BS_3; 00072 } 00073 else if((battery_voltage > BATTERY_MAX_V - BATTERY_STEP * 4) && (battery_voltage < BATTERY_MAX_V - BATTERY_STEP * 3)){ 00074 return _BS_2; 00075 } 00076 else if((battery_voltage > BATTERY_MAX_V - BATTERY_STEP * 5) && (battery_voltage < BATTERY_MAX_V - BATTERY_STEP * 4)){ 00077 return _BS_1; 00078 } 00079 else if(battery_voltage < BATTERY_MAX_V - BATTERY_STEP * 5){ 00080 return _BS_E; 00081 } 00082 return 0; 00083 } 00084 00085 uint8_t get_current_level(float current_value, uint8_t usb_state){ 00086 if(current_value < NO_CURRENT) 00087 return NO_CURRENT_STATE; 00088 else if(current_value > NO_CURRENT && current_value < LOW_CURRENT) 00089 return LOW_CURRENT_STATE; 00090 else if(current_value > LOW_CURRENT && current_value < QUICK_CURRENT){ 00091 // Determine current charger state depends on previous state 00092 if(usb_state == LOW_CURRENT_STATE) 00093 return LOW_CURRENT_STATE; 00094 else if(usb_state == QUICK_CURRENT_STATE) 00095 return QUICK_CURRENT_STATE; 00096 } 00097 else if(current_value > QUICK_CURRENT) 00098 return QUICK_CURRENT_STATE; 00099 return NO_CURRENT_STATE; 00100 } 00101 00102 int main(){ 00103 NRF52_SAADC *diffADCs[NUM_OF_DIFF_ADCs]; 00104 /* Declare your ADCs here */ 00105 /* Change NUM_OF_DIFF_ADCs in the header */ 00106 diffADCs[0] = new NRF52_SAADC(ANALOG_PIN_P, ANALOG_PIN_N); 00107 00108 //NRF52_SAADC usb1(7); // P29, AIN5 00109 //NRF52_SAADC usb2(6); // p30, AIN6 00110 00111 char low_string[25] = "LOW"; 00112 char quick_string[25] = "QUICK"; 00113 float adc1_mean=0, adc2_mean=0, adc3_mean=0; 00114 float battery_voltage = 0; 00115 float usb1_current = 0, usb2_current = 0; 00116 int count = 0; 00117 uint8_t battery_level = 0; 00118 uint8_t old_battery_level; 00119 uint8_t usb1_current_state = 0, usb2_current_state = 0; 00120 uint8_t usb1_old_state = 0, usb2_old_state = 0; 00121 uint8_t change_flag = 1; 00122 00123 #if DEBUG 00124 char buffer[25] = {0}; 00125 float old_battery_voltage = 0; 00126 float old_usb1_current = 0; 00127 float old_usb2_current = 0; 00128 #endif 00129 00130 epd.empty(); 00131 epd.writeFull(); 00132 00133 while(true){ 00134 00135 adc1_mean += diffADCs[0]->read(); 00136 adc2_mean += 1; //usb1.read(); 00137 adc3_mean += 1; //usb2.read(); 00138 count ++; 00139 00140 if (count == NUM_OF_MEASUREMENTS){ 00141 00142 adc1_mean /= NUM_OF_MEASUREMENTS; 00143 adc2_mean /= NUM_OF_MEASUREMENTS; 00144 adc3_mean /= NUM_OF_MEASUREMENTS; 00145 count = 0; 00146 00147 //voltage[i] = ((float)(diffADCs[i]->read()))*(3.3f/8192.0); // Convert raw data into voltage 00148 battery_voltage = ((float)(diffADCs[0]->read()*(3.3f/8192.0))); 00149 //battery_voltage = ((float)(diffADCs[0]->read()*(3.3f/8192.0))); 00150 //battery_voltage = adc1_mean*(ADC_REF_VOLTAGE/ADC_MAX_VALUE); 00151 usb1_current = (adc2_mean*(ADC_REF_VOLTAGE/(ADC_MAX_VALUE*2))) * CURRENT_FACTOR; 00152 usb2_current = (adc3_mean*(ADC_REF_VOLTAGE/(ADC_MAX_VALUE*2))) * CURRENT_FACTOR; 00153 00154 battery_level = get_battery_level(battery_voltage); 00155 if(battery_level != old_battery_level || change_flag){ 00156 00157 old_battery_level = battery_level; 00158 change_flag = 1; 00159 switch(battery_level){ 00160 case(0):{ 00161 for(uint16_t x=0;x<5000;x++) 00162 epd.fill(BS_E[x], x); 00163 break; 00164 } 00165 case(1):{ 00166 for(uint16_t x=0;x<5000;x++) 00167 epd.fill(BS_1[x], x); 00168 break; 00169 } 00170 case(2):{ 00171 for(uint16_t x=0;x<5000;x++) 00172 epd.fill(BS_2[x], x); 00173 break; 00174 } 00175 case(3):{ 00176 for(uint16_t x=0;x<5000;x++) 00177 epd.fill(BS_3[x], x); 00178 break; 00179 } 00180 case(4):{ 00181 for(uint16_t x=0;x<5000;x++) 00182 epd.fill(BS_4[x], x); 00183 break; 00184 } 00185 case(5):{ 00186 for(uint16_t x=0;x<5000;x++) 00187 epd.fill(BS_5[x], x); 00188 break; 00189 } 00190 case(6):{ 00191 for(uint16_t x=0;x<5000;x++) 00192 epd.fill(charged_1[x], x); 00193 break; 00194 } 00195 case(7):{ 00196 for(uint16_t x=0;x<5000;x++) 00197 epd.fill(charged_2[x], x); 00198 break; 00199 } 00200 case(8):{ 00201 for(uint16_t x=0;x<5000;x++) 00202 epd.fill(charged_3[x], x); 00203 break; 00204 } 00205 case(9):{ 00206 for(uint16_t x=0;x<5000;x++) 00207 epd.fill(charged_4[x], x); 00208 break; 00209 } 00210 default: break; 00211 } 00212 epd.write(); 00213 } 00214 00215 usb1_current_state = get_current_level(usb1_current, usb1_old_state); 00216 usb2_current_state = get_current_level(usb2_current, usb2_old_state); 00217 00218 if((usb1_old_state != usb1_current_state) || change_flag){ 00219 usb1_old_state = usb1_current_state; 00220 switch(usb1_current_state){ 00221 case(NO_CURRENT_STATE):{ 00222 epd.writeString(quick_string, 25, 180, 1); // Delete the old state 00223 epd.writeString(low_string, 25, 180, 1); 00224 break; 00225 } 00226 case(LOW_CURRENT_STATE):{ 00227 epd.writeString(quick_string, 25, 180, 1); // Delete the old state 00228 epd.writeString(low_string, 25, 180, 0); 00229 break; 00230 } 00231 case(QUICK_CURRENT_STATE):{ 00232 epd.writeString(low_string, 25, 180, 1); // Delete the old state 00233 epd.writeString(quick_string, 25, 180, 0); 00234 break; 00235 } 00236 default: break; 00237 } 00238 epd.write(); // Write string to the EPD 00239 } 00240 00241 if((usb2_old_state != usb2_current_state) || change_flag){ 00242 usb2_old_state = usb2_current_state; 00243 switch(usb2_current_state){ 00244 case(NO_CURRENT_STATE):{ 00245 epd.writeString(low_string, 135, 180, 1); // Delete the old state 00246 epd.writeString(quick_string, 135, 180, 1); // Delete the old state 00247 break; 00248 } 00249 case(LOW_CURRENT_STATE):{ 00250 epd.writeString(quick_string, 135, 180, 1); // Delete the old state 00251 epd.writeString(low_string, 135, 180, 0); 00252 break; 00253 } 00254 case(QUICK_CURRENT_STATE):{ 00255 epd.writeString(low_string, 135, 180, 1); // Delete the old state 00256 epd.writeString(quick_string, 135, 180, 0); 00257 break; 00258 } 00259 default: break; 00260 } 00261 epd.write(); // Write string to the EPD 00262 change_flag = 0; 00263 } 00264 00265 00266 #if DEBUG 00267 // Print voltage and current values in debug mode 00268 sprintf(buffer, "Battery: %5.5fV", old_battery_voltage); // Create a string 00269 epd.writeString(buffer,25,95,1); // Write new data to the buffer 00270 epd.write(); // Write string to the EPD 00271 old_battery_voltage = battery_voltage; 00272 00273 sprintf(buffer, "Battery: %5.5fV", battery_voltage); // Create a string 00274 epd.writeString(buffer,25,95,0); // Write new data to the buffer 00275 00276 sprintf(buffer, "USB1: %5.5f", old_usb1_current); // Create a string 00277 epd.writeString(buffer,5,190,1); // Write new data to the buffer 00278 old_usb1_current = usb1_current; 00279 sprintf(buffer, "USB1: %5.5f", usb1_current); // Create a string 00280 epd.writeString(buffer,5,190,0); // Write new data to the buffer 00281 00282 sprintf(buffer, "USB2: %5.5fA", old_usb2_current); // Create a string 00283 epd.writeString(buffer,105,190,1); // Write new data to the buffer 00284 old_usb2_current = usb2_current; 00285 sprintf(buffer, "USB2: %5.5fA", usb2_current); // Create a string 00286 epd.writeString(buffer,105,190,0); // Write new data to the buffer 00287 00288 epd.write(); 00289 #endif 00290 00291 adc1_mean = 0; 00292 adc2_mean = 0; 00293 adc3_mean = 0; 00294 } 00295 } 00296 }
Generated on Tue Jul 26 2022 03:30:10 by
1.7.2