Juan José Castillo
Primera prueba...
Dependencies: SLCD Servo mbed tsi_sensor
Revision 0:6d8690fad6a1, committed 2015-01-03
- Comitter:
- juanjosecastillo
- Date:
- Sat Jan 03 03:53:02 2015 +0000
- Commit message:
- Falta...
Changed in this revision
diff -r 000000000000 -r 6d8690fad6a1 SLCD.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SLCD.lib Sat Jan 03 03:53:02 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Sissors/code/SLCD/#ef2b3b7f1b01
diff -r 000000000000 -r 6d8690fad6a1 Servo.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Servo.lib Sat Jan 03 03:53:02 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/simon/code/Servo/#36b69a7ced07
diff -r 000000000000 -r 6d8690fad6a1 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Jan 03 03:53:02 2015 +0000
@@ -0,0 +1,61 @@
+#include "mbed.h"
+#include "Servo.h"
+#include "tsi_sensor.h"
+#define LCDLEN 10
+#include "SLCD.h"
+
+/* This defines will be replaced by PinNames soon */
+#if defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
+#define ELEC0 9
+#define ELEC1 10
+#elif defined (TARGET_KL05Z)
+#define ELEC0 9
+#define ELEC1 8
+#else
+#error TARGET NOT DEFINED
+#endif
+TSIAnalogSlider tsi(ELEC0, ELEC1, 40);
+
+Servo s1(PTA13);
+SLCD slcd; //define LCD display
+
+
+
+
+int main() {
+
+ float valor=0;
+ //char lcdData[LCDLEN];
+ while(1) {
+ //s1.write(tsi.readPercentage());
+
+
+
+ //LCDMessNoDwell();
+ //slcd.printf( "%f",tsi.readPercentage());
+
+ slcd.clear(); // All segments off
+ slcd.Home(); // sets next charater to posistion 0 (start)
+ //valor=tsi.readPercentage();
+ PwmOut led(LED_GREEN);
+ valor=tsi.readPercentage();
+ if (valor < 10)
+ {
+ //valor=0.5;
+ led = 1.0 - 0.5;
+ s1.write(0.5);
+ slcd.printf("%2.2f",0.5);
+ }
+ else
+ {
+
+ led = 1.0 - valor;
+ s1.write(valor);
+ slcd.printf("%2.2f",valor);
+
+ }
+
+
+ wait(0.1);
+ }
+}
diff -r 000000000000 -r 6d8690fad6a1 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat Jan 03 03:53:02 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/04dd9b1680ae \ No newline at end of file
diff -r 000000000000 -r 6d8690fad6a1 tsi_sensor.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/tsi_sensor.lib Sat Jan 03 03:53:02 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Kojto/code/tsi_sensor/#20ffa9b18488