Changed URIBeaconConfigService.h to work with ST board
Fork of BLE_API by
GattCallbackParamTypes.h
00001 /* mbed Microcontroller Library 00002 * Copyright (c) 2006-2013 ARM Limited 00003 * 00004 * Licensed under the Apache License, Version 2.0 (the "License"); 00005 * you may not use this file except in compliance with the License. 00006 * You may obtain a copy of the License at 00007 * 00008 * http://www.apache.org/licenses/LICENSE-2.0 00009 * 00010 * Unless required by applicable law or agreed to in writing, software 00011 * distributed under the License is distributed on an "AS IS" BASIS, 00012 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 00013 * See the License for the specific language governing permissions and 00014 * limitations under the License. 00015 */ 00016 00017 #ifndef __GATT_CALLBACK_PARAM_TYPES_H__ 00018 #define __GATT_CALLBACK_PARAM_TYPES_H__ 00019 00020 struct GattWriteCallbackParams { 00021 enum WriteOp_t { 00022 OP_INVALID = 0x00, /**< Invalid Operation. */ 00023 OP_WRITE_REQ = 0x01, /**< Write Request. */ 00024 OP_WRITE_CMD = 0x02, /**< Write Command. */ 00025 OP_SIGN_WRITE_CMD = 0x03, /**< Signed Write Command. */ 00026 OP_PREP_WRITE_REQ = 0x04, /**< Prepare Write Request. */ 00027 OP_EXEC_WRITE_REQ_CANCEL = 0x05, /**< Execute Write Request: Cancel all prepared writes. */ 00028 OP_EXEC_WRITE_REQ_NOW = 0x06, /**< Execute Write Request: Immediately execute all prepared writes. */ 00029 }; 00030 00031 GattAttribute::Handle_t handle; 00032 WriteOp_t writeOp; /**< Type of write operation, */ 00033 uint16_t offset; /**< Offset for the write operation. */ 00034 uint16_t len; 00035 const uint8_t *data; /* @note: data might not persist beyond the callback; make a local copy if needed. */ 00036 }; 00037 00038 struct GattReadCallbackParams { 00039 GattAttribute::Handle_t handle; 00040 uint16_t offset; /**< Offset for the read operation. */ 00041 uint16_t len; 00042 const uint8_t *data; /* @note: data might not persist beyond the callback; make a local copy if needed. */ 00043 }; 00044 00045 enum GattAuthCallbackReply_t { 00046 AUTH_CALLBACK_REPLY_SUCCESS = 0x00, /**< Success. */ 00047 AUTH_CALLBACK_REPLY_ATTERR_INVALID_HANDLE = 0x0101, /**< ATT Error: Invalid Attribute Handle. */ 00048 AUTH_CALLBACK_REPLY_ATTERR_READ_NOT_PERMITTED = 0x0102, /**< ATT Error: Read not permitted. */ 00049 AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED = 0x0103, /**< ATT Error: Write not permitted. */ 00050 AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHENTICATION = 0x0105, /**< ATT Error: Authenticated link required. */ 00051 AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET = 0x0107, /**< ATT Error: Offset specified was past the end of the attribute. */ 00052 AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION = 0x0108, /**< ATT Error: Used in ATT as Insufficient Authorisation. */ 00053 AUTH_CALLBACK_REPLY_ATTERR_PREPARE_QUEUE_FULL = 0x0109, /**< ATT Error: Used in ATT as Prepare Queue Full. */ 00054 AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_FOUND = 0x010A, /**< ATT Error: Used in ATT as Attribute not found. */ 00055 AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_LONG = 0x010B, /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */ 00056 AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH = 0x010D, /**< ATT Error: Invalid value size. */ 00057 AUTH_CALLBACK_REPLY_ATTERR_INSUF_RESOURCES = 0x0111, /**< ATT Error: Encrypted link required. */ 00058 }; 00059 00060 struct GattWriteAuthCallbackParams { 00061 GattAttribute::Handle_t handle; 00062 uint16_t offset; /**< Offset for the write operation. */ 00063 uint16_t len; /**< Length of the incoming data. */ 00064 const uint8_t *data; /**< Incoming data, variable length. */ 00065 GattAuthCallbackReply_t authorizationReply; /* This is the out parameter which needs to be set to true by the callback if the 00066 * request is to proceed; false otherwise. */ 00067 }; 00068 00069 struct GattReadAuthCallbackParams { 00070 GattAttribute::Handle_t handle; 00071 uint16_t offset; /**< Offset for the read operation. */ 00072 uint16_t len; /**< Optional: new length of the outgoing data. */ 00073 uint8_t *data; /**< Optional: new outgoing data. Leave at NULL if data is unchanged. */ 00074 GattAuthCallbackReply_t authorizationReply; /* This is the out parameter which needs to be set to true by the callback if the 00075 * request is to proceed; false otherwise. */ 00076 }; 00077 00078 /* For encapsulating handle-value update events (notifications or indications) generated at the remote server. */ 00079 struct GattHVXCallbackParams { 00080 GattAttribute::Handle_t handle; /**< Attribute Handle to which the HVx operation applies. */ 00081 HVXType_t type; /**< Indication or Notification, see @ref HVXType_t. */ 00082 uint16_t len; /**< Attribute data length. */ 00083 const uint8_t *data; /**< Attribute data, variable length. */ 00084 }; 00085 00086 #endif /*__GATT_CALLBACK_PARAM_TYPES_H__*/
Generated on Sat Jul 16 2022 17:07:02 by 1.7.2