Diff: main.cpp

Revision:

1:2ee833c4b76f

Parent:

0:ae0fe1adad01

--- a/main.cpp	Tue Jun 25 01:09:35 2013 +0000
+++ b/main.cpp	Fri Jan 31 22:08:20 2014 +0000
@@ -1,7 +1,48 @@
 #include "mbed.h"
-Serial pc(USBTX, USBRX);
+//Serial pc(USBTX, USBRX);
 Serial lcd(p28, p27);
 
+// V+/V- outputs cylinder down
+DigitalOut out1(p7);
+DigitalOut out2(p8);
+DigitalOut out3(p9);
+DigitalOut out4(p10);
+// V+/V- outputs cylinder up
+DigitalOut out5(p11);
+DigitalOut out6(p12);
+DigitalOut out7(p13);
+DigitalOut out8(p14);
+// Four push buttons left to right
+DigitalIn  pushOne(p21);
+DigitalIn  pushTwo(p22);
+DigitalIn  pushThree(p23);
+DigitalIn  pushFour(p24);
+// Run switch where p26 will be kept high
+// Can probably connect it to the 3.3V out
+DigitalIn  runIn(p25);
+DigitalOut runOut(p26);
+
+float upTime;
+float downTime;
+float waitTime;
+unsigned int count = 0;
+typedef char * string;
+string strs[5] = {
+    "Up Time",          // 0
+    "Down Time",        // 1
+    "Wait Time",        // 2
+    "Target Count",     // 3
+    "Reset Counter"     // 4
+};
+enum ValveMode {
+    UP,
+    DOWN
+};
+
+
+
+
+
 void clearLCD()
 {
     lcd.printf("%c%c",0xFE,0x01);
@@ -34,71 +75,27 @@
 
 
 
-// V+/V- outputs cylinder down
-DigitalOut out1(p7);
-DigitalOut out2(p8);
-DigitalOut out3(p9);
-DigitalOut out4(p10);
-// V+/V- outputs cylinder up
-DigitalOut out5(p11);
-DigitalOut out6(p12);
-DigitalOut out7(p13);
-DigitalOut out8(p14);
-// Four push buttons left to right
-DigitalIn  pushOne(p21);
-DigitalIn  pushTwo(p22);
-DigitalIn  pushThree(p23);
-DigitalIn  pushFour(p24);
-// Run switch where p26 will be kept high
-DigitalIn  runIn(p25);
-DigitalOut runOut(p26);
-
-typedef char * string;
-
-float upTime;
-float downTime;
-float waitTime;
-
-string strs[5] = { 
-    "Up Time",          // 0
-    "Down Time",        // 1
-    "Wait Time",        // 2
-    "Target Count",     // 3
-    "Reset Counter"    // 4
-};
-
-
-enum ValveMode
+void setValve(ValveMode dir, int val)
 {
-  CLOSED,
-  UP,
-  DOWN,
-  BOTH
-};
-
-unsigned int count = 0;
-
-void setValve(ValveMode dir)
-{
-    switch(dir)
-    {
-        case CLOSED:
-            //p0 = 0;
-            //p1 = 0;
-            //p2 = 0;
-            //p3 = 0;
+    switch(dir) {
+        case DOWN:
+            out1 = val;
+            out2 = val;
+            out3 = val;
+            out4 = val;
             break;
         case UP:
-            //p0 = 0;
-            //p1 = 0;
-            //p2 = 0;
-            //p3 = 0;
+            out5 = val;
+            out6 = val;
+            out7 = val;
+            out8 = val;
             break;
+
     }
 }
 
 
-void lcdShowParameters(int delay, int cycles)
+/*void lcdShowParameters(int delay, int cycles)
 {
     clearLCD();
     setLCDpos(1,1);
@@ -128,8 +125,16 @@
         lcd.printf("Y/N?");
     }
 }
+*/
 
-
+void printCount (int count)
+{
+    clearLCD();
+    setLCDpos(1,1);
+    lcd.printf("CURRENT COUNT IS");
+    setLCDpos(2,1);
+    lcd.printf("%d",count);
+}
 
 
 int main()
@@ -240,33 +245,18 @@
             upTime = times[0];
             downTime = times[1];
             waitTime = times[2];
-            count++;
-            out5 = 1;
-            out6 = 1;
-            out7 = 1;
-            out8 = 1;
+
+            setValve(UP, 1);
             wait(upTime);
-            out5 = 0;
-            out6 = 0;
-            out7 = 0;
-            out8 = 0;
+            setValve(UP, 0);
             wait(waitTime);
-            out1 = 1;
-            out2 = 1;
-            out3 = 1;
-            out4 = 1;
+            setValve(DOWN, 1);
             wait(downTime);
-            out1 = 0;
-            out2 = 0;
-            out3 = 0;
-            out4 = 0;
+            setValve(DOWN,0);
             wait(waitTime);
-            setLCDpos(1,1);
-            lcd.printf("CURRENT COUNT IS");
-            setLCDpos(2,1);
-            lcd.printf("                ");
-            setLCDpos(2,1);
-            lcd.printf("%d",count);
+            
+            count++;
+            printCount(count);
         } else if (count>target) {
             clearLCD();
             setLCDpos(1,1);
@@ -276,8 +266,5 @@
             wait(0.1);
         }
     }
-    /*
-    setLCDpos(2,9);
-    lcd.printf("#%7i",i);*/
 }