Diff: jmSwitch.c

Revision:

0:9112e09912db

diff -r 000000000000 -r 9112e09912db jmSwitch.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/jmSwitch.c	Sat Feb 12 16:50:25 2011 +0000
@@ -0,0 +1,152 @@
+/*************************************************************************
+ * @file	jmSwitch.c
+ * @brief	Switch Debounce Module
+ * 				 
+ * @version	1.0
+ * @date	Feb 12, 2011
+*/
+
+#include "jmRingBuffer.h"
+#include "jmMessages.h"
+#include "jmSwitch.h"
+#include "LPC17xx.h"
+#include "main.h"
+#include "jmCommands.h"
+#include "jmMessages.h"
+#include "jmRingBuffer.h"
+#include "stdio.h"
+
+#define swClose 0
+#define swOpen 1
+#define swNotInit 2
+
+
+// Static structure creation
+struct StructSwitch sSwitch[switchQty];
+
+/***********************************************************************
+ * @brief		Limit Switch Module Reset
+ * @param[in]	none
+ * @return		none
+ **********************************************************************/
+void SwitchModuleReset(void){
+	int i;
+	for(i=0;i<switchQty;i++){
+		sSwitch[i].state=swNotInit;
+	}
+}
+
+/***********************************************************************
+ * @brief	Initialize an input Switch process
+ * Format: command name (arg info)min..max values 
+ * Command Line Format: swInit (Switch id)0..7 (Pin number)0..432 (Debounce)1..255
+ * @param[in]	Extracted from command line (Switch id)0..7 (Pin number)0..432 (Debounce)1..255
+ * @return		Send Message GPPS0 id pin debounce state
+ **********************************************************************/
+void cli_SwitchInit(void){
+ //get switch id, DIP number, debounce time and update structure
+   unsigned int swNum, pin, debounce, state, port,bitValue;
+   if(ExtractUInteger(pLine,&swNum,0,7)){
+      if(ExtractUInteger(pLine,&pin,0,432)){
+         if(ExtractUInteger(pLine,&debounce,1,255)){
+		    // Get port, bit and bit value
+		    port = pin/100;
+		    bitValue = 1<<(pin%100);
+		
+            sSwitch[swNum].pin = (uint8_t)pin;
+            sSwitch[swNum].port = jmGPIO[port];
+            sSwitch[swNum].bitValue = bitValue;
+            sSwitch[swNum].debounce = (uint8_t)debounce;
+			// read Switch present state
+			state = sSwitch[swNum].port->FIOPIN &= sSwitch[swNum].bitValue;
+			if(state>0)sSwitch[swNum].state = swOpen;
+			else sSwitch[swNum].state = swClose;
+			rGPPS0(swNum);	// Message GPPS0 id pin debounce state
+            if(Feedback)printf("SW %d Pin %d Debounce %d Value %d\n",swNum,pin,debounce,state);
+
+            return;
+         }
+      }
+   }
+   if(Help)printf("swInit (Switch id)0..7 (Pin number)0..432 (Debounce)1..255\n");
+   
+   // Ignore pending command line
+   NextCommand(nl,pLine);
+}
+
+/***********************************************************************
+ * @brief		Switch Edge Detection
+ * @param[in]	none
+ * @return		Send Message GPPS0 id pin debounce state
+ **********************************************************************/
+void SwitchEdgeDetect(void){
+   unsigned int presentState,i;
+   
+   for(i=0;i<switchQty;i++){           // for each switch SM           
+      if(sSwitch[i].state < swNotInit){  // Switch initialized ?
+         if(sSwitch[i].eggTimer==0){   // debouncing ?                  
+		      
+            presentState = sSwitch[i].port->FIOPIN &= sSwitch[i].bitValue;
+            
+            if(presentState > 0)presentState = swOpen;	  // present switch state
+			else 	presentState = swClose;
+            
+            if(sSwitch[i].state > presentState ){           // High to Low edge ?
+		         sSwitch[i].eggTimer = sSwitch[i].debounce; // load debounce time
+		        // memorize presentState
+		        sSwitch[i].state = presentState;
+				rGPPS0(i);						            // GPPS0 message
+		    }
+            else{   		 
+              if(presentState > sSwitch[i].state ){          // Low to High edge ?
+		           sSwitch[i].eggTimer = sSwitch[i].debounce;// load debounce time
+		            // memorize presentState
+		            sSwitch[i].state = presentState;
+					rGPPS0(i);						         // GPPS0 message
+		      }
+            }            
+	      }
+      }
+   }               
+}
+
+/***********************************************************************
+ * @brief   Command line interface to read Limit Switch Status
+ * Format: command name (arg info)min..max values 
+ * Command Line Format: swRead (Switch id number)0..7
+ * @param[in]	Extracted from command line (switch id number)0..7
+ * @return		Message GPPS0 id pin debounce state
+ **********************************************************************/
+void cli_SwitchRead(void){
+   unsigned int swNumber;
+   if(ExtractUInteger(pLine,&swNumber,0,7)){   
+	  // One Message GPPS0 id pin debounce state
+      rGPPS0(swNumber);	 		
+      return;
+   } 
+   if(Help)printf("swRead (Switch id number)0..7\n");
+   // Ignore pending command line
+   NextCommand(nl,pLine);
+}  
+
+/** Get Module Process Properties Command Line Interface
+ * @brief	  Command Line Interface to Get All Public Process Properties
+ * @param[in] none
+ * @returns   8 Messages: GPPS0 id pin debounce state
+ */
+void cli_GPPS0(void){
+	int i;
+	for(i=0;i<switchQty;i++){	
+		rGPPS0(i); // Message GPPS0 id pin debounce state
+	}  
+}
+
+/** Public Properties Message
+ * @brief	Send Process Properties to update GUI
+ * @param[in] id Process identification
+ * @returns   Message GPPS0 id pin debounce state
+ */
+void rGPPS0(unsigned int id )
+{
+    printf("GPPS0 %d %d %d %d\n",id,sSwitch[id].pin,sSwitch[id].debounce,sSwitch[id].state); 
+}