Revision 1:ee5848eb918c, committed 2014-11-28

Comitter:

jimbotops

Date:

Fri Nov 28 16:24:50 2014 +0000

Parent:

0:01a6a40578c9

Commit message:

Working with some libraries cut and less text

Changed in this revision

--- a/DS18B20.cpp	Sun Jan 03 11:57:31 2010 +0000
+++ b/DS18B20.cpp	Fri Nov 28 16:24:50 2014 +0000
@@ -21,9 +21,8 @@
 */
 
 #include "DS18B20.h"
-#include "DebugTrace.h"
 
-DebugTrace pc_ds18B20(ON, TO_SERIAL);
+
 
 DS18B20::DS18B20(bool crcOn, bool useAddr, bool parasitic, PinName pin) : 
     OneWireThermometer(crcOn, useAddr, parasitic, pin, DS18B20_ID)
@@ -81,23 +80,23 @@
     {
         case nineBit:    // 0.5 deg C increments
             read_temp &= 0xFFF8;                // bits 2,1,0 are undefined
-             pc_ds18B20.traceOut("9 bit resolution ...\r\n");
+             printf("9 bit resolution ...\r\n");
             break;
         case tenBit:     // 0.25 deg C increments
             read_temp &= 0xFFFC;                // bits 1,0 are undefined
-            pc_ds18B20.traceOut("10 bit resolution ...\r\n");
+            printf("10 bit resolution ...\r\n");
             break;
         case elevenBit:  // 0.125 deg C increments
             read_temp &= 0xFFFE;                // bit 0 is undefined
-            pc_ds18B20.traceOut("11 bit resolution ...\r\n");
+            printf("11 bit resolution ...\r\n");
             break;
         case twelveBit:  // 0.0625 deg C increments
-            pc_ds18B20.traceOut("12 bit resolution ...\r\n");
+            printf("12 bit resolution ...\r\n");
             break;
     }
     float realTemp = (float)read_temp/16 ;
                  
-    pc_ds18B20.traceOut("TEMP_READ/REAL TEMP: %f \r\n", realTemp); 
+    printf("TEMP_READ/REAL TEMP: %f \r\n", realTemp); 
                
     return realTemp;
 }
\ No newline at end of file

--- a/DS18S20.cpp	Sun Jan 03 11:57:31 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,55 +0,0 @@
-/*
-* DS18S20. Maxim DS18S20 One-Wire Thermometer. 
-* Uses the OneWireCRC library.
-*
-* Copyright (C) <2010> Petras Saduikis <petras@petras.co.uk>
-*
-* This file is part of OneWireThermometer.
-*
-* OneWireThermometer is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License, or
-* (at your option) any later version.
-* 
-* OneWireThermometer is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with OneWireThermometer.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "DS18S20.h"
-#include "DebugTrace.h"
-
-DebugTrace pc_ds18S20(ON, TO_SERIAL);
-
-DS18S20::DS18S20(bool crcOn, bool useAddr, bool parasitic, PinName pin) : 
-    OneWireThermometer(crcOn, useAddr, parasitic, pin, DS18S20_ID)
-{
-}
-
-float DS18S20::calculateTemperature(BYTE* data)
-{    
-    // DS18S20 basic resolution is always 9 bits, which can be enhanced as follows
-    bool signBit = false;
-    if (data[TEMPERATURE_MSB] & 0x80) signBit = true;
-        
-    int read_temp = (data[TEMPERATURE_MSB] << 8) + data[TEMPERATURE_LSB];
-    if (signBit)
-    {
-        read_temp = (read_temp ^ 0xFFFF) + 1;    // two's complement
-        read_temp *= -1;
-    }
-                 
-    float readTemp = (float)read_temp/2 ;            // divide by 2
-    pc_ds18S20.traceOut("TEMP_READ: %f \r\n", readTemp);     // 9 bit resolution value
-               
-    // convert to real temperature
-    float tempCount = float(data[COUNT_PER_DEG_BYTE] - data[COUNT_REMAIN_BYTE])/(float)data[COUNT_PER_DEG_BYTE];        
-    float realTemp = (readTemp - 0.25) + tempCount;        
-    pc_ds18S20.traceOut("Temperature: %f \r\n", realTemp);   // enhanced resolution value
-    
-    return realTemp;
-}
\ No newline at end of file

--- a/DS18S20.h	Sun Jan 03 11:57:31 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,39 +0,0 @@
-/*
-* DS18S20. Maxim DS18S20 One-Wire Thermometer. 
-* Uses the OneWireCRC library.
-*
-* Copyright (C) <2010> Petras Saduikis <petras@petras.co.uk>
-*
-* This file is part of OneWireThermometer.
-*
-* OneWireThermometer is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License, or
-* (at your option) any later version.
-* 
-* OneWireThermometer is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with OneWireThermometer.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef SNATCH59_DS18S20_H
-#define SNATCH59_DS18S20_H
-
-#include "OneWireThermometer.h"
-
-class DS18S20 : public OneWireThermometer
-{
-public:
-    DS18S20(bool crcOn, bool useAddr, bool parasitic, PinName pin);
-    
-     virtual void setResolution(eResolution resln) {  };    // do nothing
-    
-protected:
-    virtual float calculateTemperature(BYTE* data);
-};
-
-#endif
\ No newline at end of file

--- a/DebugTrace.cpp	Sun Jan 03 11:57:31 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,143 +0,0 @@
-/*
-* DebugTrace. Allows dumping debug messages/values to serial or
-* to file.
-*
-* Copyright (C) <2009> Petras Saduikis <petras@petras.co.uk>
-*
-* This file is part of DebugTrace.
-*
-* DebugTrace is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License, or
-* (at your option) any later version.
-* 
-* DebugTrace is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with DebugTrace.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "DebugTrace.h"
-#include <mbed.h>
-#include <stdarg.h>
-#include <string.h>
-
-Serial logSerial(USBTX, USBRX);
-LocalFileSystem local("local");
-
-const char* FILE_PATH = "/local/";
-const char* EXTN = ".bak";
-
-DebugTrace::DebugTrace(eLog on, eLogTarget mode, const char* fileName, int maxSize) :
-    enabled(on), logMode(mode), maxFileSize(maxSize), currentFileSize(0),
-    logFileStatus(0)
-{
-    // allocate memory for file name strings
-    int str_size = (strlen(fileName) + strlen(FILE_PATH) + strlen(EXTN) + 1) * sizeof(char); 
-    logFile = (char*)malloc(str_size);
-    logFileBackup = (char*)malloc(str_size);
-    
-    // add path to log file name
-    strcpy(logFile, FILE_PATH);
-    strcat(logFile, fileName);
-    
-    // create backup file name
-    strcpy(logFileBackup, logFile);
-    strcpy(logFileBackup, strtok(logFileBackup, "."));
-    strcat(logFileBackup, EXTN);
-}
-
-DebugTrace::~DebugTrace()
-{
-    // dust to dust, ashes to ashes
-    if (logFile != NULL) free(logFile);
-    if (logFileBackup != NULL) free(logFileBackup);
-}
-
-void DebugTrace::clear()
-{
-    // don't care about whether these fail
-    remove(logFile);    
-    remove(logFileBackup);
-}
-
-void DebugTrace::backupLog()
-{
-    // delete previous backup file
-    if (remove(logFileBackup))
-    {
-        // standard copy stuff
-        char ch;
-        FILE* to = fopen(logFileBackup, "wb");
-        if (NULL != to)
-        {
-            FILE* from = fopen(logFile, "rb");   
-            if (NULL != from)
-            {
-                while(!feof(from))
-                {
-                    ch = fgetc(from);
-                    if (ferror(from)) break;
-                    
-                    if(!feof(from)) fputc(ch, to);
-                    if (ferror(to)) break;
-                }
-            }
-            
-            if (NULL != from) fclose(from);
-            if (NULL != to) fclose(to);
-        }
-    }
-
-    // now delete the log file, so we are ready to start again
-    // even if backup creation failed - the show must go on!
-    logFileStatus = remove(logFile);
-}
-
-void DebugTrace::traceOut(const char* fmt, ...)
-{
-    if (enabled)
-    {
-        va_list ap;            // argument list pointer
-        va_start(ap, fmt);
-        
-        if (TO_SERIAL == logMode)
-        {
-            vfprintf(logSerial, fmt, ap);
-        }
-        else    // TO_FILE
-        {
-            if (0 == logFileStatus)    // otherwise we failed to remove a full log file
-            {
-                // Write data to file. Note the file size may go over limit
-                // as we check total size afterwards, using the size written to file.
-                // This is not a big issue, as this mechanism is only here
-                // to stop the file growing unchecked. Just remember log file sizes may
-                // be some what over (as apposed to some what under), so don't push it 
-                // with the max file size.
-                FILE* fp = fopen(logFile, "a");
-                if (NULL == fp)
-                {
-                    va_end(ap);
-                    return;
-                }
-                int size_written = vfprintf(fp, fmt, ap);
-                fclose(fp);
-                
-                // check if we are over the max file size
-                // if so backup file and start again
-                currentFileSize += size_written;
-                if (currentFileSize >= maxFileSize)
-                {
-                    backupLog();
-                    currentFileSize = 0;
-                }
-            }
-        }
-        
-        va_end(ap);
-    }
-}

--- a/DebugTrace.h	Sun Jan 03 11:57:31 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,50 +0,0 @@
-/*
-* DebugTrace. Allows dumping debug messages/values to serial or
-* to file.
-*
-* Copyright (C) <2009> Petras Saduikis <petras@petras.co.uk>
-*
-* This file is part of DebugTrace.
-*
-* DebugTrace is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 3 of the License, or
-* (at your option) any later version.
-* 
-* DebugTrace is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with DebugTrace.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef SNATCH59_DEBUGTRACE_H
-#define SNATCH59_DEBUGTRACE_H
-
-enum eLog {OFF, ON};
-enum eLogTarget {TO_SERIAL, TO_FILE};
-
-class DebugTrace
-{
-public:
-    DebugTrace(eLog on, eLogTarget mode, const char* fileName = "log.txt", const int maxSize = 1024);
-    ~DebugTrace();
-    
-    void clear();
-    void traceOut(const char* fmt, ...);
-    
-private:
-    eLog enabled;
-    eLogTarget logMode;
-    int maxFileSize;
-    int currentFileSize;
-    char* logFile;
-    char* logFileBackup;
-    int logFileStatus;            // if things go wrong, don't write any more data to file
-    
-    void backupLog();
-};
-
-#endif

--- a/OneWireThermometer.cpp	Sun Jan 03 11:57:31 2010 +0000
+++ b/OneWireThermometer.cpp	Fri Nov 28 16:24:50 2014 +0000
@@ -22,9 +22,8 @@
 
 #include "OneWireThermometer.h"
 #include "OneWireDefs.h"
-#include "DebugTrace.h"
 
-DebugTrace pc(ON, TO_SERIAL);
+Serial pc(USBTX, USBRX);
 
 // constructor specifies standard speed for the 1-Wire comms
 OneWireThermometer::OneWireThermometer(bool crcOn, bool useAddr, bool parasitic, PinName pin, int device_id) :
@@ -42,27 +41,27 @@
     // - not really needed except for device validation if using skipROM()
     if (useAddress)
     {
-        pc.traceOut("\r\n");
-        pc.traceOut("New Scan\r\n");
+        pc.printf("\r\n");
+        pc.printf("New Scan\r\n");
 
         oneWire.resetSearch();    
         if (!oneWire.search(address))   // search for 1-wire device address
         {            
-            pc.traceOut("No more addresses.\r\n");
+            pc.printf("No more addresses.\r\n");
             wait(2);
             return false;
         }
 
-        pc.traceOut("Address = ");
+        pc.printf("Address = ");
         for (int i = 0; i < ADDRESS_SIZE; i++) 
         {
-            pc.traceOut("%x ", (int)address[i]);
+            pc.printf("%x ", (int)address[i]);
         }
-        pc.traceOut("\r\n");
+        pc.printf("\r\n");
         
         if (OneWireCRC::crc8(address, ADDRESS_CRC_BYTE) != address[ADDRESS_CRC_BYTE])   // check address CRC is valid
         {
-            pc.traceOut("CRC is not valid!\r\n");
+            pc.printf("CRC is not valid!\r\n");
             wait(2);
             return false;
         }
@@ -71,19 +70,19 @@
         {                    
             // Make sure it is a one-wire thermometer device
             if (DS18B20_ID == deviceId)
-                pc.traceOut("You need to use a DS1820 or DS18S20 for correct results.\r\n");
+                pc.printf("You need to use a DS1820 or DS18S20 for correct results.\r\n");
             else if (DS18S20_ID == deviceId)
-                pc.traceOut("You need to use a DS18B20 for correct results.\r\n");
+                pc.printf("You need to use a DS18B20 for correct results.\r\n");
             else
-              pc.traceOut("Device is not a DS18B20/DS1820/DS18S20 device.\r\n");
+              pc.printf("Device is not a DS18B20/DS1820/DS18S20 device.\r\n");
             
             wait(2);
             return false;   
         }
         else
         {
-            if (DS18B20_ID == deviceId) pc.traceOut("DS18B20 present and correct.\r\n");
-            if (DS18S20_ID == deviceId) pc.traceOut("DS1820/DS18S20 present and correct.\r\n");            
+            if (DS18B20_ID == deviceId) pc.printf("DS18B20 present and correct.\r\n");
+            if (DS18S20_ID == deviceId) pc.printf("DS1820/DS18S20 present and correct.\r\n");            
         }
     }
     
@@ -115,20 +114,17 @@
     resetAndAddress();
     oneWire.writeByte(READSCRATCH);    // read Scratchpad
 
-    pc.traceOut("read = ");
     for (int i = 0; i < THERMOM_SCRATCHPAD_SIZE; i++) 
     {               
         // we need all bytes which includes CRC check byte
         data[i] = oneWire.readByte();
-        pc.traceOut("%x ", (int)data[i]);
     }
-    pc.traceOut("\r\n");
 
     // Check CRC is valid if you want to
     if (useCRC && !(OneWireCRC::crc8(data, THERMOM_CRC_BYTE) == data[THERMOM_CRC_BYTE]))  
     {  
         // CRC failed
-        pc.traceOut("CRC FAILED... \r\n");
+        pc.printf("CRC FAILED... \r\n");
         dataOk = false;
     }
     

--- a/main.cpp	Sun Jan 03 11:57:31 2010 +0000
+++ b/main.cpp	Fri Nov 28 16:24:50 2014 +0000
@@ -25,7 +25,6 @@
 ////////////////////////////////////////////////////////////////////
 
 #include <mbed.h>
-#include "DS18S20.h"
 #include "DS18B20.h"
 #include "OneWireDefs.h"
 
@@ -35,7 +34,7 @@
 int main()
 {
     // device( crcOn, useAddress, parasitic, mbed pin )
-    THERMOMETER device(true, true, false, p25);
+    THERMOMETER device(true, true, false, p22);
     
     while (!device.initialize());    // keep calling until it works
     
@@ -45,15 +44,6 @@
         device.setResolution(nineBit);
         device.readTemperature(); 
         wait(2);
-        device.setResolution(tenBit);
-        device.readTemperature(); 
-        wait(2);
-        device.setResolution(elevenBit);
-        device.readTemperature(); 
-        wait(2);
-        device.setResolution(twelveBit);
-        device.readTemperature(); 
-        wait(2);
     }
      
     return EXIT_SUCCESS;