Jhon Plantikow / I2C_EEPROM

I2C_EEPROM

TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h@0:ac8863619623, 2015-08-13 (annotated)

Committer:
jhon309
Date:
Thu Aug 13 00:23:16 2015 +0000
Revision:
0:ac8863619623
I2C

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jhon309 0:ac8863619623 1 /**
jhon309 0:ac8863619623 2 ******************************************************************************
jhon309 0:ac8863619623 3 * @file stm32f0xx_hal_rcc.h
jhon309 0:ac8863619623 4 * @author MCD Application Team
jhon309 0:ac8863619623 5 * @version V1.2.0
jhon309 0:ac8863619623 6 * @date 11-December-2014
jhon309 0:ac8863619623 7 * @brief Header file of RCC HAL module.
jhon309 0:ac8863619623 8 ******************************************************************************
jhon309 0:ac8863619623 9 * @attention
jhon309 0:ac8863619623 10 *
jhon309 0:ac8863619623 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
jhon309 0:ac8863619623 12 *
jhon309 0:ac8863619623 13 * Redistribution and use in source and binary forms, with or without modification,
jhon309 0:ac8863619623 14 * are permitted provided that the following conditions are met:
jhon309 0:ac8863619623 15 * 1. Redistributions of source code must retain the above copyright notice,
jhon309 0:ac8863619623 16 * this list of conditions and the following disclaimer.
jhon309 0:ac8863619623 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
jhon309 0:ac8863619623 18 * this list of conditions and the following disclaimer in the documentation
jhon309 0:ac8863619623 19 * and/or other materials provided with the distribution.
jhon309 0:ac8863619623 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
jhon309 0:ac8863619623 21 * may be used to endorse or promote products derived from this software
jhon309 0:ac8863619623 22 * without specific prior written permission.
jhon309 0:ac8863619623 23 *
jhon309 0:ac8863619623 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
jhon309 0:ac8863619623 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
jhon309 0:ac8863619623 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
jhon309 0:ac8863619623 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
jhon309 0:ac8863619623 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
jhon309 0:ac8863619623 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
jhon309 0:ac8863619623 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
jhon309 0:ac8863619623 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
jhon309 0:ac8863619623 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
jhon309 0:ac8863619623 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
jhon309 0:ac8863619623 34 *
jhon309 0:ac8863619623 35 ******************************************************************************
jhon309 0:ac8863619623 36 */
jhon309 0:ac8863619623 37
jhon309 0:ac8863619623 38 /* Define to prevent recursive inclusion -------------------------------------*/
jhon309 0:ac8863619623 39 #ifndef __STM32F0xx_HAL_RCC_H
jhon309 0:ac8863619623 40 #define __STM32F0xx_HAL_RCC_H
jhon309 0:ac8863619623 41
jhon309 0:ac8863619623 42 #ifdef __cplusplus
jhon309 0:ac8863619623 43 extern "C" {
jhon309 0:ac8863619623 44 #endif
jhon309 0:ac8863619623 45
jhon309 0:ac8863619623 46 /* Includes ------------------------------------------------------------------*/
jhon309 0:ac8863619623 47 #include "stm32f0xx_hal_def.h"
jhon309 0:ac8863619623 48
jhon309 0:ac8863619623 49 /** @addtogroup STM32F0xx_HAL_Driver
jhon309 0:ac8863619623 50 * @{
jhon309 0:ac8863619623 51 */
jhon309 0:ac8863619623 52
jhon309 0:ac8863619623 53 /** @addtogroup RCC
jhon309 0:ac8863619623 54 * @{
jhon309 0:ac8863619623 55 */
jhon309 0:ac8863619623 56
jhon309 0:ac8863619623 57 /* Exported types ------------------------------------------------------------*/
jhon309 0:ac8863619623 58
jhon309 0:ac8863619623 59 /** @defgroup RCC_Exported_Types RCC Exported Types
jhon309 0:ac8863619623 60 * @{
jhon309 0:ac8863619623 61 */
jhon309 0:ac8863619623 62
jhon309 0:ac8863619623 63 /**
jhon309 0:ac8863619623 64 * @brief RCC PLL configuration structure definition
jhon309 0:ac8863619623 65 */
jhon309 0:ac8863619623 66 typedef struct
jhon309 0:ac8863619623 67 {
jhon309 0:ac8863619623 68 uint32_t PLLState; /*!< PLLState: The new state of the PLL.
jhon309 0:ac8863619623 69 This parameter can be a value of @ref RCC_PLL_Config */
jhon309 0:ac8863619623 70
jhon309 0:ac8863619623 71 uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
jhon309 0:ac8863619623 72 This parameter must be a value of @ref RCC_PLL_Clock_Source */
jhon309 0:ac8863619623 73
jhon309 0:ac8863619623 74 uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
jhon309 0:ac8863619623 75 This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
jhon309 0:ac8863619623 76
jhon309 0:ac8863619623 77 uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
jhon309 0:ac8863619623 78 This parameter must be a value of @ref RCC_PLL_Multiplication_Factor */
jhon309 0:ac8863619623 79
jhon309 0:ac8863619623 80 }RCC_PLLInitTypeDef;
jhon309 0:ac8863619623 81
jhon309 0:ac8863619623 82 /**
jhon309 0:ac8863619623 83 * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
jhon309 0:ac8863619623 84 */
jhon309 0:ac8863619623 85 typedef struct
jhon309 0:ac8863619623 86 {
jhon309 0:ac8863619623 87 uint32_t OscillatorType; /*!< The Oscillators to be configured.
jhon309 0:ac8863619623 88 This parameter can be a value of @ref RCC_Oscillator_Type */
jhon309 0:ac8863619623 89
jhon309 0:ac8863619623 90 uint32_t HSEState; /*!< The new state of the HSE.
jhon309 0:ac8863619623 91 This parameter can be a value of @ref RCC_HSE_Config */
jhon309 0:ac8863619623 92
jhon309 0:ac8863619623 93 uint32_t LSEState; /*!< The new state of the LSE.
jhon309 0:ac8863619623 94 This parameter can be a value of @ref RCC_LSE_Config */
jhon309 0:ac8863619623 95
jhon309 0:ac8863619623 96 uint32_t HSIState; /*!< The new state of the HSI.
jhon309 0:ac8863619623 97 This parameter can be a value of @ref RCC_HSI_Config */
jhon309 0:ac8863619623 98
jhon309 0:ac8863619623 99 uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
jhon309 0:ac8863619623 100 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
jhon309 0:ac8863619623 101
jhon309 0:ac8863619623 102 uint32_t HSI14State; /*!< The new state of the HSI14.
jhon309 0:ac8863619623 103 This parameter can be a value of @ref RCC_HSI14_Config */
jhon309 0:ac8863619623 104
jhon309 0:ac8863619623 105 uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
jhon309 0:ac8863619623 106 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
jhon309 0:ac8863619623 107
jhon309 0:ac8863619623 108 uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
jhon309 0:ac8863619623 109 This parameter can be a value of @ref RCCEx_HSI48_Config */
jhon309 0:ac8863619623 110
jhon309 0:ac8863619623 111 uint32_t LSIState; /*!< The new state of the LSI.
jhon309 0:ac8863619623 112 This parameter can be a value of @ref RCC_LSI_Config */
jhon309 0:ac8863619623 113
jhon309 0:ac8863619623 114 RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
jhon309 0:ac8863619623 115
jhon309 0:ac8863619623 116 }RCC_OscInitTypeDef;
jhon309 0:ac8863619623 117
jhon309 0:ac8863619623 118 /**
jhon309 0:ac8863619623 119 * @brief RCC System, AHB and APB busses clock configuration structure definition
jhon309 0:ac8863619623 120 */
jhon309 0:ac8863619623 121 typedef struct
jhon309 0:ac8863619623 122 {
jhon309 0:ac8863619623 123 uint32_t ClockType; /*!< The clock to be configured.
jhon309 0:ac8863619623 124 This parameter can be a value of @ref RCC_System_Clock_Type */
jhon309 0:ac8863619623 125
jhon309 0:ac8863619623 126 uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
jhon309 0:ac8863619623 127 This parameter can be a value of @ref RCC_System_Clock_Source */
jhon309 0:ac8863619623 128
jhon309 0:ac8863619623 129 uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
jhon309 0:ac8863619623 130 This parameter can be a value of @ref RCC_AHB_Clock_Source */
jhon309 0:ac8863619623 131
jhon309 0:ac8863619623 132 uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
jhon309 0:ac8863619623 133 This parameter can be a value of @ref RCC_APB1_Clock_Source */
jhon309 0:ac8863619623 134
jhon309 0:ac8863619623 135 }RCC_ClkInitTypeDef;
jhon309 0:ac8863619623 136
jhon309 0:ac8863619623 137 /**
jhon309 0:ac8863619623 138 * @}
jhon309 0:ac8863619623 139 */
jhon309 0:ac8863619623 140
jhon309 0:ac8863619623 141 /* Exported constants --------------------------------------------------------*/
jhon309 0:ac8863619623 142 /** @defgroup RCC_Exported_Constants RCC Exported Constants
jhon309 0:ac8863619623 143 * @{
jhon309 0:ac8863619623 144 */
jhon309 0:ac8863619623 145
jhon309 0:ac8863619623 146 /** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
jhon309 0:ac8863619623 147 * @brief RCC registers bit address in the alias region
jhon309 0:ac8863619623 148 * @{
jhon309 0:ac8863619623 149 */
jhon309 0:ac8863619623 150 #define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
jhon309 0:ac8863619623 151 /* --- CR Register ---*/
jhon309 0:ac8863619623 152 #define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
jhon309 0:ac8863619623 153 /* --- CFGR Register ---*/
jhon309 0:ac8863619623 154 #define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
jhon309 0:ac8863619623 155 /* --- CIR Register ---*/
jhon309 0:ac8863619623 156 #define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
jhon309 0:ac8863619623 157 /* --- BDCR Register ---*/
jhon309 0:ac8863619623 158 #define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
jhon309 0:ac8863619623 159 /* --- CSR Register ---*/
jhon309 0:ac8863619623 160 #define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
jhon309 0:ac8863619623 161 /* --- CR2 Register ---*/
jhon309 0:ac8863619623 162 #define RCC_CR2_OFFSET (RCC_OFFSET + 0x34)
jhon309 0:ac8863619623 163
jhon309 0:ac8863619623 164 /* CR register byte 2 (Bits[23:16]) base address */
jhon309 0:ac8863619623 165 #define RCC_CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
jhon309 0:ac8863619623 166
jhon309 0:ac8863619623 167 /* CIR register byte 1 (Bits[15:8]) base address */
jhon309 0:ac8863619623 168 #define RCC_CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
jhon309 0:ac8863619623 169
jhon309 0:ac8863619623 170 /* CIR register byte 2 (Bits[23:16]) base address */
jhon309 0:ac8863619623 171 #define RCC_CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
jhon309 0:ac8863619623 172
jhon309 0:ac8863619623 173 /* CSR register byte 1 (Bits[15:8]) base address */
jhon309 0:ac8863619623 174 #define RCC_CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
jhon309 0:ac8863619623 175
jhon309 0:ac8863619623 176 /* BDCR register byte 0 (Bits[7:0] base address */
jhon309 0:ac8863619623 177 #define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
jhon309 0:ac8863619623 178
jhon309 0:ac8863619623 179 #define RCC_CFGR_PLLMUL_BITNUMBER 18
jhon309 0:ac8863619623 180 #define RCC_CFGR2_PREDIV_BITNUMBER 0
jhon309 0:ac8863619623 181
jhon309 0:ac8863619623 182 /**
jhon309 0:ac8863619623 183 * @}
jhon309 0:ac8863619623 184 */
jhon309 0:ac8863619623 185
jhon309 0:ac8863619623 186 /** @defgroup RCC_Timeout RCC Timeout
jhon309 0:ac8863619623 187 * @{
jhon309 0:ac8863619623 188 */
jhon309 0:ac8863619623 189 /* LSE state change timeout */
jhon309 0:ac8863619623 190 #define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
jhon309 0:ac8863619623 191
jhon309 0:ac8863619623 192 /* Disable Backup domain write protection state change timeout */
jhon309 0:ac8863619623 193 #define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 194 /**
jhon309 0:ac8863619623 195 * @}
jhon309 0:ac8863619623 196 */
jhon309 0:ac8863619623 197
jhon309 0:ac8863619623 198 /** @defgroup RCC_Oscillator_Type RCC Oscillator Type
jhon309 0:ac8863619623 199 * @{
jhon309 0:ac8863619623 200 */
jhon309 0:ac8863619623 201 #define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
jhon309 0:ac8863619623 202 #define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
jhon309 0:ac8863619623 203 #define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
jhon309 0:ac8863619623 204 #define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
jhon309 0:ac8863619623 205 #define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
jhon309 0:ac8863619623 206 #define RCC_OSCILLATORTYPE_HSI14 ((uint32_t)0x00000010)
jhon309 0:ac8863619623 207 #define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020)
jhon309 0:ac8863619623 208
jhon309 0:ac8863619623 209 #define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
jhon309 0:ac8863619623 210 (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
jhon309 0:ac8863619623 211 (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
jhon309 0:ac8863619623 212 (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
jhon309 0:ac8863619623 213 (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
jhon309 0:ac8863619623 214 (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
jhon309 0:ac8863619623 215 (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
jhon309 0:ac8863619623 216 /**
jhon309 0:ac8863619623 217 * @}
jhon309 0:ac8863619623 218 */
jhon309 0:ac8863619623 219
jhon309 0:ac8863619623 220 /** @defgroup RCC_HSE_Config RCC HSE Config
jhon309 0:ac8863619623 221 * @{
jhon309 0:ac8863619623 222 */
jhon309 0:ac8863619623 223 #define RCC_HSE_OFF ((uint8_t)0x00)
jhon309 0:ac8863619623 224 #define RCC_HSE_ON ((uint8_t)0x01)
jhon309 0:ac8863619623 225 #define RCC_HSE_BYPASS ((uint8_t)0x05)
jhon309 0:ac8863619623 226
jhon309 0:ac8863619623 227 #define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
jhon309 0:ac8863619623 228 ((HSE) == RCC_HSE_BYPASS))
jhon309 0:ac8863619623 229 /**
jhon309 0:ac8863619623 230 * @}
jhon309 0:ac8863619623 231 */
jhon309 0:ac8863619623 232
jhon309 0:ac8863619623 233 /** @defgroup RCC_LSE_Config RCC_LSE_Config
jhon309 0:ac8863619623 234 * @{
jhon309 0:ac8863619623 235 */
jhon309 0:ac8863619623 236 #define RCC_LSE_OFF ((uint8_t)0x00)
jhon309 0:ac8863619623 237 #define RCC_LSE_ON ((uint8_t)0x01)
jhon309 0:ac8863619623 238 #define RCC_LSE_BYPASS ((uint8_t)0x05)
jhon309 0:ac8863619623 239
jhon309 0:ac8863619623 240 #define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
jhon309 0:ac8863619623 241 ((LSE) == RCC_LSE_BYPASS))
jhon309 0:ac8863619623 242 /**
jhon309 0:ac8863619623 243 * @}
jhon309 0:ac8863619623 244 */
jhon309 0:ac8863619623 245
jhon309 0:ac8863619623 246 /** @defgroup RCC_HSI_Config RCC HSI Config
jhon309 0:ac8863619623 247 * @{
jhon309 0:ac8863619623 248 */
jhon309 0:ac8863619623 249 #define RCC_HSI_OFF ((uint8_t)0x00)
jhon309 0:ac8863619623 250 #define RCC_HSI_ON ((uint8_t)0x01)
jhon309 0:ac8863619623 251
jhon309 0:ac8863619623 252 #define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
jhon309 0:ac8863619623 253
jhon309 0:ac8863619623 254 #define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
jhon309 0:ac8863619623 255 /**
jhon309 0:ac8863619623 256 * @}
jhon309 0:ac8863619623 257 */
jhon309 0:ac8863619623 258
jhon309 0:ac8863619623 259 /** @defgroup RCC_HSI14_Config RCC HSI14 Config
jhon309 0:ac8863619623 260 * @{
jhon309 0:ac8863619623 261 */
jhon309 0:ac8863619623 262 #define RCC_HSI14_OFF ((uint32_t)0x00)
jhon309 0:ac8863619623 263 #define RCC_HSI14_ON RCC_CR2_HSI14ON
jhon309 0:ac8863619623 264 #define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS)
jhon309 0:ac8863619623 265
jhon309 0:ac8863619623 266 #define IS_RCC_HSI14(HSI14) (((HSI14) == RCC_HSI14_OFF) || ((HSI14) == RCC_HSI14_ON) || ((HSI14) == RCC_HSI14_ADC_CONTROL))
jhon309 0:ac8863619623 267
jhon309 0:ac8863619623 268 #define RCC_HSI14CALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI14 calibration trimming value */
jhon309 0:ac8863619623 269 /**
jhon309 0:ac8863619623 270 * @}
jhon309 0:ac8863619623 271 */
jhon309 0:ac8863619623 272
jhon309 0:ac8863619623 273 /** @defgroup RCC_LSI_Config RCC LSI Config
jhon309 0:ac8863619623 274 * @{
jhon309 0:ac8863619623 275 */
jhon309 0:ac8863619623 276 #define RCC_LSI_OFF ((uint8_t)0x00)
jhon309 0:ac8863619623 277 #define RCC_LSI_ON ((uint8_t)0x01)
jhon309 0:ac8863619623 278
jhon309 0:ac8863619623 279 #define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
jhon309 0:ac8863619623 280 /**
jhon309 0:ac8863619623 281 * @}
jhon309 0:ac8863619623 282 */
jhon309 0:ac8863619623 283
jhon309 0:ac8863619623 284 /** @defgroup RCC_PLL_Config RCC PLL Config
jhon309 0:ac8863619623 285 * @{
jhon309 0:ac8863619623 286 */
jhon309 0:ac8863619623 287 #define RCC_PLL_NONE ((uint8_t)0x00)
jhon309 0:ac8863619623 288 #define RCC_PLL_OFF ((uint8_t)0x01)
jhon309 0:ac8863619623 289 #define RCC_PLL_ON ((uint8_t)0x02)
jhon309 0:ac8863619623 290
jhon309 0:ac8863619623 291 #define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
jhon309 0:ac8863619623 292 /**
jhon309 0:ac8863619623 293 * @}
jhon309 0:ac8863619623 294 */
jhon309 0:ac8863619623 295
jhon309 0:ac8863619623 296 /** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
jhon309 0:ac8863619623 297 * @{
jhon309 0:ac8863619623 298 */
jhon309 0:ac8863619623 299 #define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
jhon309 0:ac8863619623 300 #define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
jhon309 0:ac8863619623 301 #define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
jhon309 0:ac8863619623 302 #define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
jhon309 0:ac8863619623 303 #define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
jhon309 0:ac8863619623 304 #define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
jhon309 0:ac8863619623 305 #define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
jhon309 0:ac8863619623 306 #define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
jhon309 0:ac8863619623 307 #define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
jhon309 0:ac8863619623 308 #define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
jhon309 0:ac8863619623 309 #define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
jhon309 0:ac8863619623 310 #define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
jhon309 0:ac8863619623 311 #define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
jhon309 0:ac8863619623 312 #define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
jhon309 0:ac8863619623 313 #define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
jhon309 0:ac8863619623 314 #define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
jhon309 0:ac8863619623 315
jhon309 0:ac8863619623 316 #define IS_RCC_PREDIV(PREDIV) (((PREDIV) == RCC_PREDIV_DIV1) || ((PREDIV) == RCC_PREDIV_DIV2) || \
jhon309 0:ac8863619623 317 ((PREDIV) == RCC_PREDIV_DIV3) || ((PREDIV) == RCC_PREDIV_DIV4) || \
jhon309 0:ac8863619623 318 ((PREDIV) == RCC_PREDIV_DIV5) || ((PREDIV) == RCC_PREDIV_DIV6) || \
jhon309 0:ac8863619623 319 ((PREDIV) == RCC_PREDIV_DIV7) || ((PREDIV) == RCC_PREDIV_DIV8) || \
jhon309 0:ac8863619623 320 ((PREDIV) == RCC_PREDIV_DIV9) || ((PREDIV) == RCC_PREDIV_DIV10) || \
jhon309 0:ac8863619623 321 ((PREDIV) == RCC_PREDIV_DIV11) || ((PREDIV) == RCC_PREDIV_DIV12) || \
jhon309 0:ac8863619623 322 ((PREDIV) == RCC_PREDIV_DIV13) || ((PREDIV) == RCC_PREDIV_DIV14) || \
jhon309 0:ac8863619623 323 ((PREDIV) == RCC_PREDIV_DIV15) || ((PREDIV) == RCC_PREDIV_DIV16))
jhon309 0:ac8863619623 324 /**
jhon309 0:ac8863619623 325 * @}
jhon309 0:ac8863619623 326 */
jhon309 0:ac8863619623 327
jhon309 0:ac8863619623 328 /** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
jhon309 0:ac8863619623 329 * @{
jhon309 0:ac8863619623 330 */
jhon309 0:ac8863619623 331 #define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
jhon309 0:ac8863619623 332 #define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
jhon309 0:ac8863619623 333 #define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
jhon309 0:ac8863619623 334 #define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
jhon309 0:ac8863619623 335 #define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
jhon309 0:ac8863619623 336 #define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
jhon309 0:ac8863619623 337 #define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
jhon309 0:ac8863619623 338 #define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
jhon309 0:ac8863619623 339 #define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
jhon309 0:ac8863619623 340 #define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
jhon309 0:ac8863619623 341 #define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
jhon309 0:ac8863619623 342 #define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
jhon309 0:ac8863619623 343 #define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
jhon309 0:ac8863619623 344 #define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
jhon309 0:ac8863619623 345 #define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
jhon309 0:ac8863619623 346
jhon309 0:ac8863619623 347 #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
jhon309 0:ac8863619623 348 ((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
jhon309 0:ac8863619623 349 ((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
jhon309 0:ac8863619623 350 ((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
jhon309 0:ac8863619623 351 ((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
jhon309 0:ac8863619623 352 ((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
jhon309 0:ac8863619623 353 ((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
jhon309 0:ac8863619623 354 ((MUL) == RCC_PLL_MUL16))
jhon309 0:ac8863619623 355 /**
jhon309 0:ac8863619623 356 * @}
jhon309 0:ac8863619623 357 */
jhon309 0:ac8863619623 358
jhon309 0:ac8863619623 359 /** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
jhon309 0:ac8863619623 360 * @{
jhon309 0:ac8863619623 361 */
jhon309 0:ac8863619623 362 #define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
jhon309 0:ac8863619623 363 /**
jhon309 0:ac8863619623 364 * @}
jhon309 0:ac8863619623 365 */
jhon309 0:ac8863619623 366
jhon309 0:ac8863619623 367 /** @defgroup RCC_System_Clock_Type RCC System Clock Type
jhon309 0:ac8863619623 368 * @{
jhon309 0:ac8863619623 369 */
jhon309 0:ac8863619623 370 #define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
jhon309 0:ac8863619623 371 #define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
jhon309 0:ac8863619623 372 #define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
jhon309 0:ac8863619623 373
jhon309 0:ac8863619623 374 #define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
jhon309 0:ac8863619623 375 (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
jhon309 0:ac8863619623 376 (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1))
jhon309 0:ac8863619623 377 /**
jhon309 0:ac8863619623 378 * @}
jhon309 0:ac8863619623 379 */
jhon309 0:ac8863619623 380
jhon309 0:ac8863619623 381 /** @defgroup RCC_System_Clock_Source RCC System Clock Source
jhon309 0:ac8863619623 382 * @{
jhon309 0:ac8863619623 383 */
jhon309 0:ac8863619623 384 #define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
jhon309 0:ac8863619623 385 #define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
jhon309 0:ac8863619623 386 #define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
jhon309 0:ac8863619623 387 /**
jhon309 0:ac8863619623 388 * @}
jhon309 0:ac8863619623 389 */
jhon309 0:ac8863619623 390
jhon309 0:ac8863619623 391 /** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
jhon309 0:ac8863619623 392 * @{
jhon309 0:ac8863619623 393 */
jhon309 0:ac8863619623 394 #define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
jhon309 0:ac8863619623 395 #define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
jhon309 0:ac8863619623 396 #define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
jhon309 0:ac8863619623 397 /**
jhon309 0:ac8863619623 398 * @}
jhon309 0:ac8863619623 399 */
jhon309 0:ac8863619623 400
jhon309 0:ac8863619623 401 /** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
jhon309 0:ac8863619623 402 * @{
jhon309 0:ac8863619623 403 */
jhon309 0:ac8863619623 404 #define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
jhon309 0:ac8863619623 405 #define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
jhon309 0:ac8863619623 406 #define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
jhon309 0:ac8863619623 407 #define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
jhon309 0:ac8863619623 408 #define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
jhon309 0:ac8863619623 409 #define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
jhon309 0:ac8863619623 410 #define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
jhon309 0:ac8863619623 411 #define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
jhon309 0:ac8863619623 412 #define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
jhon309 0:ac8863619623 413
jhon309 0:ac8863619623 414 #define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
jhon309 0:ac8863619623 415 ((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
jhon309 0:ac8863619623 416 ((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
jhon309 0:ac8863619623 417 ((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
jhon309 0:ac8863619623 418 ((DIV) == RCC_SYSCLK_DIV512))
jhon309 0:ac8863619623 419 /**
jhon309 0:ac8863619623 420 * @}
jhon309 0:ac8863619623 421 */
jhon309 0:ac8863619623 422
jhon309 0:ac8863619623 423 /** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
jhon309 0:ac8863619623 424 * @{
jhon309 0:ac8863619623 425 */
jhon309 0:ac8863619623 426 #define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1
jhon309 0:ac8863619623 427 #define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2
jhon309 0:ac8863619623 428 #define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4
jhon309 0:ac8863619623 429 #define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8
jhon309 0:ac8863619623 430 #define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16
jhon309 0:ac8863619623 431
jhon309 0:ac8863619623 432 #define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
jhon309 0:ac8863619623 433 ((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
jhon309 0:ac8863619623 434 ((DIV) == RCC_HCLK_DIV16))
jhon309 0:ac8863619623 435 /**
jhon309 0:ac8863619623 436 * @}
jhon309 0:ac8863619623 437 */
jhon309 0:ac8863619623 438
jhon309 0:ac8863619623 439 /** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
jhon309 0:ac8863619623 440 * @{
jhon309 0:ac8863619623 441 */
jhon309 0:ac8863619623 442 #define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
jhon309 0:ac8863619623 443 #define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
jhon309 0:ac8863619623 444 #define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
jhon309 0:ac8863619623 445 #define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
jhon309 0:ac8863619623 446
jhon309 0:ac8863619623 447 #define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
jhon309 0:ac8863619623 448 ((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
jhon309 0:ac8863619623 449 ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
jhon309 0:ac8863619623 450 ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
jhon309 0:ac8863619623 451 /**
jhon309 0:ac8863619623 452 * @}
jhon309 0:ac8863619623 453 */
jhon309 0:ac8863619623 454
jhon309 0:ac8863619623 455 /** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
jhon309 0:ac8863619623 456 * @{
jhon309 0:ac8863619623 457 */
jhon309 0:ac8863619623 458 #define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
jhon309 0:ac8863619623 459 #define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
jhon309 0:ac8863619623 460 #define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
jhon309 0:ac8863619623 461 #define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
jhon309 0:ac8863619623 462
jhon309 0:ac8863619623 463 #define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
jhon309 0:ac8863619623 464 ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
jhon309 0:ac8863619623 465 ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
jhon309 0:ac8863619623 466 ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
jhon309 0:ac8863619623 467 /**
jhon309 0:ac8863619623 468 * @}
jhon309 0:ac8863619623 469 */
jhon309 0:ac8863619623 470
jhon309 0:ac8863619623 471 /** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
jhon309 0:ac8863619623 472 * @{
jhon309 0:ac8863619623 473 */
jhon309 0:ac8863619623 474 #define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
jhon309 0:ac8863619623 475 #define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
jhon309 0:ac8863619623 476
jhon309 0:ac8863619623 477 #define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
jhon309 0:ac8863619623 478 ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
jhon309 0:ac8863619623 479 /**
jhon309 0:ac8863619623 480 * @}
jhon309 0:ac8863619623 481 */
jhon309 0:ac8863619623 482
jhon309 0:ac8863619623 483 /** @defgroup RCC_MCOx_Index RCC MCOx Index
jhon309 0:ac8863619623 484 * @{
jhon309 0:ac8863619623 485 */
jhon309 0:ac8863619623 486 #define RCC_MCO ((uint32_t)0x00000000)
jhon309 0:ac8863619623 487
jhon309 0:ac8863619623 488 #define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
jhon309 0:ac8863619623 489 /**
jhon309 0:ac8863619623 490 * @}
jhon309 0:ac8863619623 491 */
jhon309 0:ac8863619623 492
jhon309 0:ac8863619623 493 /** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
jhon309 0:ac8863619623 494 * @{
jhon309 0:ac8863619623 495 */
jhon309 0:ac8863619623 496 #define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
jhon309 0:ac8863619623 497 #define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
jhon309 0:ac8863619623 498 #define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
jhon309 0:ac8863619623 499 #define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
jhon309 0:ac8863619623 500 #define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
jhon309 0:ac8863619623 501 #define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
jhon309 0:ac8863619623 502 #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
jhon309 0:ac8863619623 503 #define RCC_MCOSOURCE_HSI14 RCC_CFGR_MCO_HSI14
jhon309 0:ac8863619623 504 /**
jhon309 0:ac8863619623 505 * @}
jhon309 0:ac8863619623 506 */
jhon309 0:ac8863619623 507
jhon309 0:ac8863619623 508 /** @defgroup RCC_Interrupt RCC Interrupt
jhon309 0:ac8863619623 509 * @{
jhon309 0:ac8863619623 510 */
jhon309 0:ac8863619623 511 #define RCC_IT_LSIRDY ((uint8_t)0x01)
jhon309 0:ac8863619623 512 #define RCC_IT_LSERDY ((uint8_t)0x02)
jhon309 0:ac8863619623 513 #define RCC_IT_HSIRDY ((uint8_t)0x04)
jhon309 0:ac8863619623 514 #define RCC_IT_HSERDY ((uint8_t)0x08)
jhon309 0:ac8863619623 515 #define RCC_IT_PLLRDY ((uint8_t)0x10)
jhon309 0:ac8863619623 516 #define RCC_IT_HSI14 ((uint8_t)0x20)
jhon309 0:ac8863619623 517 #define RCC_IT_CSS ((uint8_t)0x80)
jhon309 0:ac8863619623 518 /**
jhon309 0:ac8863619623 519 * @}
jhon309 0:ac8863619623 520 */
jhon309 0:ac8863619623 521
jhon309 0:ac8863619623 522 /** @defgroup RCC_Flag RCC Flag
jhon309 0:ac8863619623 523 * Elements values convention: 0XXYYYYYb
jhon309 0:ac8863619623 524 * - YYYYY : Flag position in the register
jhon309 0:ac8863619623 525 * - XX : Register index
jhon309 0:ac8863619623 526 * - 00: CR register
jhon309 0:ac8863619623 527 * - 01: CR2 register
jhon309 0:ac8863619623 528 * - 10: BDCR register
jhon309 0:ac8863619623 529 * - 11: CSR register
jhon309 0:ac8863619623 530 * @{
jhon309 0:ac8863619623 531 */
jhon309 0:ac8863619623 532 #define CR_REG_INDEX 0
jhon309 0:ac8863619623 533 #define CR2_REG_INDEX 1
jhon309 0:ac8863619623 534 #define BDCR_REG_INDEX 2
jhon309 0:ac8863619623 535 #define CSR_REG_INDEX 3
jhon309 0:ac8863619623 536
jhon309 0:ac8863619623 537 /* Flags in the CR register */
jhon309 0:ac8863619623 538 #define RCC_CR_HSIRDY_BitNumber 1
jhon309 0:ac8863619623 539 #define RCC_CR_HSERDY_BitNumber 17
jhon309 0:ac8863619623 540 #define RCC_CR_PLLRDY_BitNumber 25
jhon309 0:ac8863619623 541
jhon309 0:ac8863619623 542 #define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSIRDY_BitNumber))
jhon309 0:ac8863619623 543 #define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSERDY_BitNumber))
jhon309 0:ac8863619623 544 #define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_PLLRDY_BitNumber))
jhon309 0:ac8863619623 545
jhon309 0:ac8863619623 546 /* Flags in the CR2 register */
jhon309 0:ac8863619623 547 #define RCC_CR2_HSI14RDY_BitNumber 1
jhon309 0:ac8863619623 548
jhon309 0:ac8863619623 549 #define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI14RDY_BitNumber))
jhon309 0:ac8863619623 550
jhon309 0:ac8863619623 551 /* Flags in the BDCR register */
jhon309 0:ac8863619623 552 #define RCC_BDCR_LSERDY_BitNumber 1
jhon309 0:ac8863619623 553
jhon309 0:ac8863619623 554 #define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | RCC_BDCR_LSERDY_BitNumber))
jhon309 0:ac8863619623 555
jhon309 0:ac8863619623 556 /* Flags in the CSR register */
jhon309 0:ac8863619623 557 #define RCC_CSR_LSIRDY_BitNumber 1
jhon309 0:ac8863619623 558 #define RCC_CSR_V18PWRRSTF_BitNumber 23
jhon309 0:ac8863619623 559 #define RCC_CSR_RMVF_BitNumber 24
jhon309 0:ac8863619623 560 #define RCC_CSR_OBLRSTF_BitNumber 25
jhon309 0:ac8863619623 561 #define RCC_CSR_PINRSTF_BitNumber 26
jhon309 0:ac8863619623 562 #define RCC_CSR_PORRSTF_BitNumber 27
jhon309 0:ac8863619623 563 #define RCC_CSR_SFTRSTF_BitNumber 28
jhon309 0:ac8863619623 564 #define RCC_CSR_IWDGRSTF_BitNumber 29
jhon309 0:ac8863619623 565 #define RCC_CSR_WWDGRSTF_BitNumber 30
jhon309 0:ac8863619623 566 #define RCC_CSR_LPWRRSTF_BitNumber 31
jhon309 0:ac8863619623 567
jhon309 0:ac8863619623 568 #define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
jhon309 0:ac8863619623 569 #define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
jhon309 0:ac8863619623 570 #define RCC_FLAG_RMV ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_RMVF_BitNumber))
jhon309 0:ac8863619623 571 #define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_OBLRSTF_BitNumber))
jhon309 0:ac8863619623 572 #define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PINRSTF_BitNumber))
jhon309 0:ac8863619623 573 #define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PORRSTF_BitNumber))
jhon309 0:ac8863619623 574 #define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_SFTRSTF_BitNumber))
jhon309 0:ac8863619623 575 #define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_IWDGRSTF_BitNumber))
jhon309 0:ac8863619623 576 #define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_WWDGRSTF_BitNumber))
jhon309 0:ac8863619623 577 #define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LPWRRSTF_BitNumber))
jhon309 0:ac8863619623 578 /**
jhon309 0:ac8863619623 579 * @}
jhon309 0:ac8863619623 580 */
jhon309 0:ac8863619623 581
jhon309 0:ac8863619623 582 /** @defgroup RCC_Calibration_values RCC Calibration values
jhon309 0:ac8863619623 583 * @{
jhon309 0:ac8863619623 584 */
jhon309 0:ac8863619623 585 #define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
jhon309 0:ac8863619623 586
jhon309 0:ac8863619623 587 /**
jhon309 0:ac8863619623 588 * @}
jhon309 0:ac8863619623 589 */
jhon309 0:ac8863619623 590
jhon309 0:ac8863619623 591 /** @addtogroup RCC_Timeout
jhon309 0:ac8863619623 592 * @{
jhon309 0:ac8863619623 593 */
jhon309 0:ac8863619623 594
jhon309 0:ac8863619623 595 #define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
jhon309 0:ac8863619623 596 #define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 597 #define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 598 #define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
jhon309 0:ac8863619623 599 #define HSI14_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 600 #define HSI48_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 601 #define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
jhon309 0:ac8863619623 602 #define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
jhon309 0:ac8863619623 603
jhon309 0:ac8863619623 604 /**
jhon309 0:ac8863619623 605 * @}
jhon309 0:ac8863619623 606 */
jhon309 0:ac8863619623 607
jhon309 0:ac8863619623 608 /**
jhon309 0:ac8863619623 609 * @}
jhon309 0:ac8863619623 610 */
jhon309 0:ac8863619623 611
jhon309 0:ac8863619623 612 /* Exported macro ------------------------------------------------------------*/
jhon309 0:ac8863619623 613
jhon309 0:ac8863619623 614 /** @defgroup RCC_Exported_Macros RCC Exported Macros
jhon309 0:ac8863619623 615 * @{
jhon309 0:ac8863619623 616 */
jhon309 0:ac8863619623 617
jhon309 0:ac8863619623 618 /** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
jhon309 0:ac8863619623 619 * @brief Enable or disable the AHB peripheral clock.
jhon309 0:ac8863619623 620 * @note After reset, the peripheral clock (used for registers read/write access)
jhon309 0:ac8863619623 621 * is disabled and the application software has to enable this clock before
jhon309 0:ac8863619623 622 * using it.
jhon309 0:ac8863619623 623 * @{
jhon309 0:ac8863619623 624 */
jhon309 0:ac8863619623 625 #define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
jhon309 0:ac8863619623 626 #define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
jhon309 0:ac8863619623 627 #define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
jhon309 0:ac8863619623 628 #define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
jhon309 0:ac8863619623 629 #define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
jhon309 0:ac8863619623 630 #define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
jhon309 0:ac8863619623 631 #define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
jhon309 0:ac8863619623 632 #define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
jhon309 0:ac8863619623 633
jhon309 0:ac8863619623 634 #define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
jhon309 0:ac8863619623 635 #define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
jhon309 0:ac8863619623 636 #define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
jhon309 0:ac8863619623 637 #define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
jhon309 0:ac8863619623 638 #define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
jhon309 0:ac8863619623 639 #define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
jhon309 0:ac8863619623 640 #define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
jhon309 0:ac8863619623 641 #define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
jhon309 0:ac8863619623 642 /**
jhon309 0:ac8863619623 643 * @}
jhon309 0:ac8863619623 644 */
jhon309 0:ac8863619623 645
jhon309 0:ac8863619623 646 /** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
jhon309 0:ac8863619623 647 * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
jhon309 0:ac8863619623 648 * @note After reset, the peripheral clock (used for registers read/write access)
jhon309 0:ac8863619623 649 * is disabled and the application software has to enable this clock before
jhon309 0:ac8863619623 650 * using it.
jhon309 0:ac8863619623 651 * @{
jhon309 0:ac8863619623 652 */
jhon309 0:ac8863619623 653 #define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
jhon309 0:ac8863619623 654 #define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
jhon309 0:ac8863619623 655 #define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
jhon309 0:ac8863619623 656 #define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
jhon309 0:ac8863619623 657 #define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
jhon309 0:ac8863619623 658
jhon309 0:ac8863619623 659 #define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
jhon309 0:ac8863619623 660 #define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
jhon309 0:ac8863619623 661 #define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
jhon309 0:ac8863619623 662 #define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
jhon309 0:ac8863619623 663 #define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
jhon309 0:ac8863619623 664 /**
jhon309 0:ac8863619623 665 * @}
jhon309 0:ac8863619623 666 */
jhon309 0:ac8863619623 667
jhon309 0:ac8863619623 668 /** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
jhon309 0:ac8863619623 669 * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
jhon309 0:ac8863619623 670 * @note After reset, the peripheral clock (used for registers read/write access)
jhon309 0:ac8863619623 671 * is disabled and the application software has to enable this clock before
jhon309 0:ac8863619623 672 * using it.
jhon309 0:ac8863619623 673 * @{
jhon309 0:ac8863619623 674 */
jhon309 0:ac8863619623 675 #define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
jhon309 0:ac8863619623 676 #define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
jhon309 0:ac8863619623 677 #define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
jhon309 0:ac8863619623 678 #define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
jhon309 0:ac8863619623 679 #define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
jhon309 0:ac8863619623 680 #define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
jhon309 0:ac8863619623 681 #define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
jhon309 0:ac8863619623 682 #define __DBGMCU_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_DBGMCUEN))
jhon309 0:ac8863619623 683
jhon309 0:ac8863619623 684 #define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
jhon309 0:ac8863619623 685 #define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
jhon309 0:ac8863619623 686 #define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
jhon309 0:ac8863619623 687 #define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
jhon309 0:ac8863619623 688 #define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
jhon309 0:ac8863619623 689 #define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
jhon309 0:ac8863619623 690 #define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
jhon309 0:ac8863619623 691 #define __DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
jhon309 0:ac8863619623 692 /**
jhon309 0:ac8863619623 693 * @}
jhon309 0:ac8863619623 694 */
jhon309 0:ac8863619623 695
jhon309 0:ac8863619623 696 /** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
jhon309 0:ac8863619623 697 * @brief Force or release AHB peripheral reset.
jhon309 0:ac8863619623 698 * @{
jhon309 0:ac8863619623 699 */
jhon309 0:ac8863619623 700 #define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
jhon309 0:ac8863619623 701 #define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
jhon309 0:ac8863619623 702 #define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
jhon309 0:ac8863619623 703 #define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
jhon309 0:ac8863619623 704 #define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
jhon309 0:ac8863619623 705
jhon309 0:ac8863619623 706 #define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
jhon309 0:ac8863619623 707 #define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
jhon309 0:ac8863619623 708 #define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
jhon309 0:ac8863619623 709 #define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
jhon309 0:ac8863619623 710 #define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
jhon309 0:ac8863619623 711 /**
jhon309 0:ac8863619623 712 * @}
jhon309 0:ac8863619623 713 */
jhon309 0:ac8863619623 714
jhon309 0:ac8863619623 715 /** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
jhon309 0:ac8863619623 716 * @brief Force or release APB1 peripheral reset.
jhon309 0:ac8863619623 717 * @{
jhon309 0:ac8863619623 718 */
jhon309 0:ac8863619623 719 #define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
jhon309 0:ac8863619623 720 #define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
jhon309 0:ac8863619623 721 #define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
jhon309 0:ac8863619623 722 #define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
jhon309 0:ac8863619623 723 #define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
jhon309 0:ac8863619623 724 #define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
jhon309 0:ac8863619623 725
jhon309 0:ac8863619623 726 #define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
jhon309 0:ac8863619623 727 #define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
jhon309 0:ac8863619623 728 #define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
jhon309 0:ac8863619623 729 #define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
jhon309 0:ac8863619623 730 #define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
jhon309 0:ac8863619623 731 #define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
jhon309 0:ac8863619623 732 /**
jhon309 0:ac8863619623 733 * @}
jhon309 0:ac8863619623 734 */
jhon309 0:ac8863619623 735
jhon309 0:ac8863619623 736 /** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
jhon309 0:ac8863619623 737 * @brief Force or release APB2 peripheral reset.
jhon309 0:ac8863619623 738 * @{
jhon309 0:ac8863619623 739 */
jhon309 0:ac8863619623 740 #define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
jhon309 0:ac8863619623 741 #define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
jhon309 0:ac8863619623 742 #define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
jhon309 0:ac8863619623 743 #define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
jhon309 0:ac8863619623 744 #define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
jhon309 0:ac8863619623 745 #define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
jhon309 0:ac8863619623 746 #define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
jhon309 0:ac8863619623 747 #define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
jhon309 0:ac8863619623 748 #define __DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
jhon309 0:ac8863619623 749
jhon309 0:ac8863619623 750 #define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
jhon309 0:ac8863619623 751 #define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
jhon309 0:ac8863619623 752 #define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
jhon309 0:ac8863619623 753 #define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
jhon309 0:ac8863619623 754 #define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
jhon309 0:ac8863619623 755 #define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
jhon309 0:ac8863619623 756 #define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
jhon309 0:ac8863619623 757 #define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
jhon309 0:ac8863619623 758 #define __DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
jhon309 0:ac8863619623 759 /**
jhon309 0:ac8863619623 760 * @}
jhon309 0:ac8863619623 761 */
jhon309 0:ac8863619623 762
jhon309 0:ac8863619623 763 /** @defgroup RCC_HSI_Configuration RCC HSI Configuration
jhon309 0:ac8863619623 764 * @{
jhon309 0:ac8863619623 765 */
jhon309 0:ac8863619623 766
jhon309 0:ac8863619623 767 /** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
jhon309 0:ac8863619623 768 * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
jhon309 0:ac8863619623 769 * It is used (enabled by hardware) as system clock source after startup
jhon309 0:ac8863619623 770 * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
jhon309 0:ac8863619623 771 * of the HSE used directly or indirectly as system clock (if the Clock
jhon309 0:ac8863619623 772 * Security System CSS is enabled).
jhon309 0:ac8863619623 773 * @note HSI can not be stopped if it is used as system clock source. In this case,
jhon309 0:ac8863619623 774 * you have to select another source of the system clock then stop the HSI.
jhon309 0:ac8863619623 775 * @note After enabling the HSI, the application software should wait on HSIRDY
jhon309 0:ac8863619623 776 * flag to be set indicating that HSI clock is stable and can be used as
jhon309 0:ac8863619623 777 * system clock source.
jhon309 0:ac8863619623 778 * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
jhon309 0:ac8863619623 779 * clock cycles.
jhon309 0:ac8863619623 780 */
jhon309 0:ac8863619623 781 #define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
jhon309 0:ac8863619623 782 #define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
jhon309 0:ac8863619623 783
jhon309 0:ac8863619623 784 /** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
jhon309 0:ac8863619623 785 * @note The calibration is used to compensate for the variations in voltage
jhon309 0:ac8863619623 786 * and temperature that influence the frequency of the internal HSI RC.
jhon309 0:ac8863619623 787 * @param __HSICalibrationValue__: specifies the calibration trimming value
jhon309 0:ac8863619623 788 * (default is RCC_HSICALIBRATION_DEFAULT).
jhon309 0:ac8863619623 789 * This parameter must be a number between 0 and 0x1F.
jhon309 0:ac8863619623 790 */
jhon309 0:ac8863619623 791 #define RCC_CR_HSITRIM_BitNumber 3
jhon309 0:ac8863619623 792 #define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
jhon309 0:ac8863619623 793 MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_BitNumber)
jhon309 0:ac8863619623 794 /**
jhon309 0:ac8863619623 795 * @}
jhon309 0:ac8863619623 796 */
jhon309 0:ac8863619623 797
jhon309 0:ac8863619623 798 /** @defgroup RCC_LSI_Configuration RCC LSI Configuration
jhon309 0:ac8863619623 799 * @{
jhon309 0:ac8863619623 800 */
jhon309 0:ac8863619623 801
jhon309 0:ac8863619623 802 /** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
jhon309 0:ac8863619623 803 * @note After enabling the LSI, the application software should wait on
jhon309 0:ac8863619623 804 * LSIRDY flag to be set indicating that LSI clock is stable and can
jhon309 0:ac8863619623 805 * be used to clock the IWDG and/or the RTC.
jhon309 0:ac8863619623 806 * @note LSI can not be disabled if the IWDG is running.
jhon309 0:ac8863619623 807 * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
jhon309 0:ac8863619623 808 * clock cycles.
jhon309 0:ac8863619623 809 */
jhon309 0:ac8863619623 810 #define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
jhon309 0:ac8863619623 811 #define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
jhon309 0:ac8863619623 812 /**
jhon309 0:ac8863619623 813 * @}
jhon309 0:ac8863619623 814 */
jhon309 0:ac8863619623 815
jhon309 0:ac8863619623 816 /** @defgroup RCC_HSE_Configuration RCC HSE Configuration
jhon309 0:ac8863619623 817 * @{
jhon309 0:ac8863619623 818 */
jhon309 0:ac8863619623 819
jhon309 0:ac8863619623 820 /**
jhon309 0:ac8863619623 821 * @brief Macro to configure the External High Speed oscillator (HSE).
jhon309 0:ac8863619623 822 * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
jhon309 0:ac8863619623 823 * software should wait on HSERDY flag to be set indicating that HSE clock
jhon309 0:ac8863619623 824 * is stable and can be used to clock the PLL and/or system clock.
jhon309 0:ac8863619623 825 * @note HSE state can not be changed if it is used directly or through the
jhon309 0:ac8863619623 826 * PLL as system clock. In this case, you have to select another source
jhon309 0:ac8863619623 827 * of the system clock then change the HSE state (ex. disable it).
jhon309 0:ac8863619623 828 * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
jhon309 0:ac8863619623 829 * @note This function reset the CSSON bit, so if the Clock security system(CSS)
jhon309 0:ac8863619623 830 * was previously enabled you have to enable it again after calling this
jhon309 0:ac8863619623 831 * function.
jhon309 0:ac8863619623 832 * @param __STATE__: specifies the new state of the HSE.
jhon309 0:ac8863619623 833 * This parameter can be one of the following values:
jhon309 0:ac8863619623 834 * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
jhon309 0:ac8863619623 835 * 6 HSE oscillator clock cycles.
jhon309 0:ac8863619623 836 * @arg RCC_HSE_ON: turn ON the HSE oscillator
jhon309 0:ac8863619623 837 * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
jhon309 0:ac8863619623 838 */
jhon309 0:ac8863619623 839 #define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)RCC_CR_BYTE2_ADDRESS = (__STATE__))
jhon309 0:ac8863619623 840
jhon309 0:ac8863619623 841 /**
jhon309 0:ac8863619623 842 * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
jhon309 0:ac8863619623 843 * @note Predivision factor can not be changed if PLL is used as system clock
jhon309 0:ac8863619623 844 * In this case, you have to select another source of the system clock, disable the PLL and
jhon309 0:ac8863619623 845 * then change the HSE predivision factor.
jhon309 0:ac8863619623 846 * @param __HSEPredivValue__: specifies the division value applied to HSE.
jhon309 0:ac8863619623 847 * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
jhon309 0:ac8863619623 848 */
jhon309 0:ac8863619623 849 #define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
jhon309 0:ac8863619623 850 MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
jhon309 0:ac8863619623 851 /**
jhon309 0:ac8863619623 852 * @}
jhon309 0:ac8863619623 853 */
jhon309 0:ac8863619623 854
jhon309 0:ac8863619623 855 /** @defgroup RCC_LSE_Configuration RCC LSE Configuration
jhon309 0:ac8863619623 856 * @{
jhon309 0:ac8863619623 857 */
jhon309 0:ac8863619623 858 /**
jhon309 0:ac8863619623 859 * @brief Macro to configure the External Low Speed oscillator (LSE).
jhon309 0:ac8863619623 860 * @note As the LSE is in the Backup domain and write access is denied to
jhon309 0:ac8863619623 861 * this domain after reset, you have to enable write access using
jhon309 0:ac8863619623 862 * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
jhon309 0:ac8863619623 863 * (to be done once after reset).
jhon309 0:ac8863619623 864 * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
jhon309 0:ac8863619623 865 * software should wait on LSERDY flag to be set indicating that LSE clock
jhon309 0:ac8863619623 866 * is stable and can be used to clock the RTC.
jhon309 0:ac8863619623 867 * @param __STATE__: specifies the new state of the LSE.
jhon309 0:ac8863619623 868 * This parameter can be one of the following values:
jhon309 0:ac8863619623 869 * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
jhon309 0:ac8863619623 870 * 6 LSE oscillator clock cycles.
jhon309 0:ac8863619623 871 * @arg RCC_LSE_ON: turn ON the LSE oscillator
jhon309 0:ac8863619623 872 * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
jhon309 0:ac8863619623 873 */
jhon309 0:ac8863619623 874 #define __HAL_RCC_LSE_CONFIG(__STATE__) \
jhon309 0:ac8863619623 875 MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
jhon309 0:ac8863619623 876 /**
jhon309 0:ac8863619623 877 * @}
jhon309 0:ac8863619623 878 */
jhon309 0:ac8863619623 879
jhon309 0:ac8863619623 880 /** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
jhon309 0:ac8863619623 881 * @{
jhon309 0:ac8863619623 882 */
jhon309 0:ac8863619623 883
jhon309 0:ac8863619623 884 /** @brief Macros to enable or disable the Internal 14Mhz High Speed oscillator (HSI14).
jhon309 0:ac8863619623 885 * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
jhon309 0:ac8863619623 886 * @note HSI14 can not be stopped if it is used as system clock source. In this case,
jhon309 0:ac8863619623 887 * you have to select another source of the system clock then stop the HSI14.
jhon309 0:ac8863619623 888 * @note After enabling the HSI14 with __HAL_RCC_HSI14_ENABLE(), the application software
jhon309 0:ac8863619623 889 * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be
jhon309 0:ac8863619623 890 * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
jhon309 0:ac8863619623 891 * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
jhon309 0:ac8863619623 892 * clock cycles.
jhon309 0:ac8863619623 893 */
jhon309 0:ac8863619623 894 #define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
jhon309 0:ac8863619623 895 #define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
jhon309 0:ac8863619623 896
jhon309 0:ac8863619623 897 /** @brief macros to Enable or Disable the Internal 14Mhz High Speed oscillator (HSI14) usage by ADC.
jhon309 0:ac8863619623 898 */
jhon309 0:ac8863619623 899 #define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
jhon309 0:ac8863619623 900 #define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
jhon309 0:ac8863619623 901
jhon309 0:ac8863619623 902 /** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
jhon309 0:ac8863619623 903 * @note The calibration is used to compensate for the variations in voltage
jhon309 0:ac8863619623 904 * and temperature that influence the frequency of the internal HSI14 RC.
jhon309 0:ac8863619623 905 * @param __HSI14CalibrationValue__: specifies the calibration trimming value
jhon309 0:ac8863619623 906 * (default is RCC_HSI14CALIBRATION_DEFAULT).
jhon309 0:ac8863619623 907 * This parameter must be a number between 0 and 0x1F.
jhon309 0:ac8863619623 908 */
jhon309 0:ac8863619623 909 #define RCC_CR2_HSI14TRIM_BitNumber 3
jhon309 0:ac8863619623 910 #define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CalibrationValue__) \
jhon309 0:ac8863619623 911 MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CalibrationValue__) << RCC_CR2_HSI14TRIM_BitNumber)
jhon309 0:ac8863619623 912 /**
jhon309 0:ac8863619623 913 * @}
jhon309 0:ac8863619623 914 */
jhon309 0:ac8863619623 915
jhon309 0:ac8863619623 916 /** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
jhon309 0:ac8863619623 917 * @{
jhon309 0:ac8863619623 918 */
jhon309 0:ac8863619623 919
jhon309 0:ac8863619623 920 /** @brief Macro to configure the USART1 clock (USART1CLK).
jhon309 0:ac8863619623 921 * @param __USART1CLKSource__: specifies the USART1 clock source.
jhon309 0:ac8863619623 922 * This parameter can be one of the following values:
jhon309 0:ac8863619623 923 * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
jhon309 0:ac8863619623 924 * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
jhon309 0:ac8863619623 925 * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
jhon309 0:ac8863619623 926 * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
jhon309 0:ac8863619623 927 */
jhon309 0:ac8863619623 928 #define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
jhon309 0:ac8863619623 929 MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
jhon309 0:ac8863619623 930
jhon309 0:ac8863619623 931 /** @brief Macro to get the USART1 clock source.
jhon309 0:ac8863619623 932 * @retval The clock source can be one of the following values:
jhon309 0:ac8863619623 933 * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
jhon309 0:ac8863619623 934 * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
jhon309 0:ac8863619623 935 * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
jhon309 0:ac8863619623 936 * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
jhon309 0:ac8863619623 937 */
jhon309 0:ac8863619623 938 #define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
jhon309 0:ac8863619623 939 /**
jhon309 0:ac8863619623 940 * @}
jhon309 0:ac8863619623 941 */
jhon309 0:ac8863619623 942
jhon309 0:ac8863619623 943 /** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
jhon309 0:ac8863619623 944 * @{
jhon309 0:ac8863619623 945 */
jhon309 0:ac8863619623 946
jhon309 0:ac8863619623 947 /** @brief Macro to configure the I2C1 clock (I2C1CLK).
jhon309 0:ac8863619623 948 * @param __I2C1CLKSource__: specifies the I2C1 clock source.
jhon309 0:ac8863619623 949 * This parameter can be one of the following values:
jhon309 0:ac8863619623 950 * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
jhon309 0:ac8863619623 951 * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
jhon309 0:ac8863619623 952 */
jhon309 0:ac8863619623 953 #define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
jhon309 0:ac8863619623 954 MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
jhon309 0:ac8863619623 955
jhon309 0:ac8863619623 956 /** @brief Macro to get the I2C1 clock source.
jhon309 0:ac8863619623 957 * @retval The clock source can be one of the following values:
jhon309 0:ac8863619623 958 * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
jhon309 0:ac8863619623 959 * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
jhon309 0:ac8863619623 960 */
jhon309 0:ac8863619623 961 #define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
jhon309 0:ac8863619623 962 /**
jhon309 0:ac8863619623 963 * @}
jhon309 0:ac8863619623 964 */
jhon309 0:ac8863619623 965
jhon309 0:ac8863619623 966 /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
jhon309 0:ac8863619623 967 * @{
jhon309 0:ac8863619623 968 */
jhon309 0:ac8863619623 969 /** @brief Macros to enable or disable the the RTC clock.
jhon309 0:ac8863619623 970 * @note These macros must be used only after the RTC clock source was selected.
jhon309 0:ac8863619623 971 */
jhon309 0:ac8863619623 972 #define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
jhon309 0:ac8863619623 973 #define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
jhon309 0:ac8863619623 974
jhon309 0:ac8863619623 975 /** @brief Macro to configure the RTC clock (RTCCLK).
jhon309 0:ac8863619623 976 * @note As the RTC clock configuration bits are in the Backup domain and write
jhon309 0:ac8863619623 977 * access is denied to this domain after reset, you have to enable write
jhon309 0:ac8863619623 978 * access using the Power Backup Access macro before to configure
jhon309 0:ac8863619623 979 * the RTC clock source (to be done once after reset).
jhon309 0:ac8863619623 980 * @note Once the RTC clock is configured it can't be changed unless the
jhon309 0:ac8863619623 981 * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
jhon309 0:ac8863619623 982 * a Power On Reset (POR).
jhon309 0:ac8863619623 983 * @param __RTCCLKSource__: specifies the RTC clock source.
jhon309 0:ac8863619623 984 * This parameter can be one of the following values:
jhon309 0:ac8863619623 985 * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
jhon309 0:ac8863619623 986 * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
jhon309 0:ac8863619623 987 * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
jhon309 0:ac8863619623 988 * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
jhon309 0:ac8863619623 989 *
jhon309 0:ac8863619623 990 * @note If the LSE is used as RTC clock source, the RTC continues to
jhon309 0:ac8863619623 991 * work in STOP and STANDBY modes, and can be used as wakeup source.
jhon309 0:ac8863619623 992 * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
jhon309 0:ac8863619623 993 * the RTC cannot be used in STOP and STANDBY modes.
jhon309 0:ac8863619623 994 * @note The system must always be configured so as to get a PCLK frequency greater than or
jhon309 0:ac8863619623 995 * equal to the RTCCLK frequency for a proper operation of the RTC.
jhon309 0:ac8863619623 996 */
jhon309 0:ac8863619623 997 #define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
jhon309 0:ac8863619623 998 MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
jhon309 0:ac8863619623 999
jhon309 0:ac8863619623 1000 /** @brief Macro to get the RTC clock source.
jhon309 0:ac8863619623 1001 * @retval The clock source can be one of the following values:
jhon309 0:ac8863619623 1002 * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
jhon309 0:ac8863619623 1003 * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
jhon309 0:ac8863619623 1004 * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
jhon309 0:ac8863619623 1005 * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
jhon309 0:ac8863619623 1006 */
jhon309 0:ac8863619623 1007 #define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
jhon309 0:ac8863619623 1008 /**
jhon309 0:ac8863619623 1009 * @}
jhon309 0:ac8863619623 1010 */
jhon309 0:ac8863619623 1011
jhon309 0:ac8863619623 1012 /** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
jhon309 0:ac8863619623 1013 * @{
jhon309 0:ac8863619623 1014 */
jhon309 0:ac8863619623 1015
jhon309 0:ac8863619623 1016 /** @brief Macro to force or release the Backup domain reset.
jhon309 0:ac8863619623 1017 * @note These macros reset the RTC peripheral (including the backup registers)
jhon309 0:ac8863619623 1018 * and the RTC clock source selection in RCC_CSR register.
jhon309 0:ac8863619623 1019 * @note The BKPSRAM is not affected by this reset.
jhon309 0:ac8863619623 1020 */
jhon309 0:ac8863619623 1021 #define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
jhon309 0:ac8863619623 1022 #define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
jhon309 0:ac8863619623 1023 /**
jhon309 0:ac8863619623 1024 * @}
jhon309 0:ac8863619623 1025 */
jhon309 0:ac8863619623 1026
jhon309 0:ac8863619623 1027 /** @defgroup RCC_PLL_Configuration RCC PLL Configuration
jhon309 0:ac8863619623 1028 * @{
jhon309 0:ac8863619623 1029 */
jhon309 0:ac8863619623 1030
jhon309 0:ac8863619623 1031 /** @brief Macro to enable or disable the PLL.
jhon309 0:ac8863619623 1032 * @note After enabling the PLL, the application software should wait on
jhon309 0:ac8863619623 1033 * PLLRDY flag to be set indicating that PLL clock is stable and can
jhon309 0:ac8863619623 1034 * be used as system clock source.
jhon309 0:ac8863619623 1035 * @note The PLL can not be disabled if it is used as system clock source
jhon309 0:ac8863619623 1036 * @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
jhon309 0:ac8863619623 1037 */
jhon309 0:ac8863619623 1038 #define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
jhon309 0:ac8863619623 1039 #define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
jhon309 0:ac8863619623 1040
jhon309 0:ac8863619623 1041 /** @brief Macro to configure the PLL clock source, multiplication and division factors.
jhon309 0:ac8863619623 1042 * @note This macro must be used only when the PLL is disabled.
jhon309 0:ac8863619623 1043 *
jhon309 0:ac8863619623 1044 * @param __RCC_PLLSource__: specifies the PLL entry clock source.
jhon309 0:ac8863619623 1045 * This parameter can be one of the following values:
jhon309 0:ac8863619623 1046 * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
jhon309 0:ac8863619623 1047 * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
jhon309 0:ac8863619623 1048 * @param __PREDIV__: specifies the predivider factor for PLL VCO input clock
jhon309 0:ac8863619623 1049 * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
jhon309 0:ac8863619623 1050 * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
jhon309 0:ac8863619623 1051 * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
jhon309 0:ac8863619623 1052 *
jhon309 0:ac8863619623 1053 */
jhon309 0:ac8863619623 1054 #define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
jhon309 0:ac8863619623 1055 do { \
jhon309 0:ac8863619623 1056 MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
jhon309 0:ac8863619623 1057 MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
jhon309 0:ac8863619623 1058 } while(0)
jhon309 0:ac8863619623 1059 /**
jhon309 0:ac8863619623 1060 * @}
jhon309 0:ac8863619623 1061 */
jhon309 0:ac8863619623 1062
jhon309 0:ac8863619623 1063 /** @defgroup RCC_Get_Clock_source RCC Get Clock source
jhon309 0:ac8863619623 1064 * @{
jhon309 0:ac8863619623 1065 */
jhon309 0:ac8863619623 1066
jhon309 0:ac8863619623 1067 /** @brief Macro to get the clock source used as system clock.
jhon309 0:ac8863619623 1068 * @retval The clock source used as system clock.
jhon309 0:ac8863619623 1069 * The returned value can be one of the following value:
jhon309 0:ac8863619623 1070 * @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
jhon309 0:ac8863619623 1071 * @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
jhon309 0:ac8863619623 1072 * @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
jhon309 0:ac8863619623 1073 */
jhon309 0:ac8863619623 1074 #define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
jhon309 0:ac8863619623 1075
jhon309 0:ac8863619623 1076 /** @brief Macro to get the oscillator used as PLL clock source.
jhon309 0:ac8863619623 1077 * @retval The oscillator used as PLL clock source. The returned value can be one
jhon309 0:ac8863619623 1078 * of the following:
jhon309 0:ac8863619623 1079 * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
jhon309 0:ac8863619623 1080 * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
jhon309 0:ac8863619623 1081 */
jhon309 0:ac8863619623 1082 #define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
jhon309 0:ac8863619623 1083 /**
jhon309 0:ac8863619623 1084 * @}
jhon309 0:ac8863619623 1085 */
jhon309 0:ac8863619623 1086
jhon309 0:ac8863619623 1087 /** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
jhon309 0:ac8863619623 1088 * @brief macros to manage the specified RCC Flags and interrupts.
jhon309 0:ac8863619623 1089 * @{
jhon309 0:ac8863619623 1090 */
jhon309 0:ac8863619623 1091
jhon309 0:ac8863619623 1092 /** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
jhon309 0:ac8863619623 1093 * the selected interrupts.).
jhon309 0:ac8863619623 1094 * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
jhon309 0:ac8863619623 1095 * This parameter can be any combination of the following values:
jhon309 0:ac8863619623 1096 * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
jhon309 0:ac8863619623 1097 * @arg RCC_IT_LSERDY: LSE ready interrupt enable
jhon309 0:ac8863619623 1098 * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
jhon309 0:ac8863619623 1099 * @arg RCC_IT_HSERDY: HSE ready interrupt enable
jhon309 0:ac8863619623 1100 * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
jhon309 0:ac8863619623 1101 * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
jhon309 0:ac8863619623 1102 * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
jhon309 0:ac8863619623 1103 */
jhon309 0:ac8863619623 1104 #define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
jhon309 0:ac8863619623 1105
jhon309 0:ac8863619623 1106 /** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
jhon309 0:ac8863619623 1107 * the selected interrupts.).
jhon309 0:ac8863619623 1108 * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
jhon309 0:ac8863619623 1109 * This parameter can be any combination of the following values:
jhon309 0:ac8863619623 1110 * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
jhon309 0:ac8863619623 1111 * @arg RCC_IT_LSERDY: LSE ready interrupt enable
jhon309 0:ac8863619623 1112 * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
jhon309 0:ac8863619623 1113 * @arg RCC_IT_HSERDY: HSE ready interrupt enable
jhon309 0:ac8863619623 1114 * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
jhon309 0:ac8863619623 1115 * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
jhon309 0:ac8863619623 1116 * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
jhon309 0:ac8863619623 1117 */
jhon309 0:ac8863619623 1118 #define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
jhon309 0:ac8863619623 1119
jhon309 0:ac8863619623 1120 /** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
jhon309 0:ac8863619623 1121 * bits to clear the selected interrupt pending bits.
jhon309 0:ac8863619623 1122 * @param __IT__: specifies the interrupt pending bit to clear.
jhon309 0:ac8863619623 1123 * This parameter can be any combination of the following values:
jhon309 0:ac8863619623 1124 * @arg RCC_IT_LSIRDY: LSI ready interrupt clear
jhon309 0:ac8863619623 1125 * @arg RCC_IT_LSERDY: LSE ready interrupt clear
jhon309 0:ac8863619623 1126 * @arg RCC_IT_HSIRDY: HSI ready interrupt clear
jhon309 0:ac8863619623 1127 * @arg RCC_IT_HSERDY: HSE ready interrupt clear
jhon309 0:ac8863619623 1128 * @arg RCC_IT_PLLRDY: PLL ready interrupt clear
jhon309 0:ac8863619623 1129 * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt clear
jhon309 0:ac8863619623 1130 * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt clear (only applicable to STM32F0X2 USB devices)
jhon309 0:ac8863619623 1131 * @arg RCC_IT_CSS: Clock Security System interrupt clear
jhon309 0:ac8863619623 1132 */
jhon309 0:ac8863619623 1133 #define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)RCC_CIR_BYTE2_ADDRESS = (__IT__))
jhon309 0:ac8863619623 1134
jhon309 0:ac8863619623 1135 /** @brief Check the RCC's interrupt has occurred or not.
jhon309 0:ac8863619623 1136 * @param __IT__: specifies the RCC interrupt source to check.
jhon309 0:ac8863619623 1137 * This parameter can be one of the following values:
jhon309 0:ac8863619623 1138 * @arg RCC_IT_LSIRDY: LSI ready interrupt flag
jhon309 0:ac8863619623 1139 * @arg RCC_IT_LSERDY: LSE ready interrupt flag
jhon309 0:ac8863619623 1140 * @arg RCC_IT_HSIRDY: HSI ready interrupt flag
jhon309 0:ac8863619623 1141 * @arg RCC_IT_HSERDY: HSE ready interrupt flag
jhon309 0:ac8863619623 1142 * @arg RCC_IT_PLLRDY: PLL ready interrupt flag
jhon309 0:ac8863619623 1143 * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt flag
jhon309 0:ac8863619623 1144 * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt flag (only applicable to STM32F0X2 USB devices)
jhon309 0:ac8863619623 1145 * @arg RCC_IT_CSS: Clock Security System interrupt flag
jhon309 0:ac8863619623 1146 * @retval The new state of __IT__ (TRUE or FALSE).
jhon309 0:ac8863619623 1147 */
jhon309 0:ac8863619623 1148 #define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
jhon309 0:ac8863619623 1149
jhon309 0:ac8863619623 1150 /** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
jhon309 0:ac8863619623 1151 * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
jhon309 0:ac8863619623 1152 */
jhon309 0:ac8863619623 1153 #define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF)
jhon309 0:ac8863619623 1154
jhon309 0:ac8863619623 1155 /** @brief Check RCC flag is set or not.
jhon309 0:ac8863619623 1156 * @param __FLAG__: specifies the flag to check.
jhon309 0:ac8863619623 1157 * This parameter can be one of the following values:
jhon309 0:ac8863619623 1158 * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
jhon309 0:ac8863619623 1159 * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
jhon309 0:ac8863619623 1160 * @arg RCC_FLAG_PLLRDY: PLL clock ready
jhon309 0:ac8863619623 1161 * @arg RCC_FLAG_HSI14RDY: HSI14 oscillator clock ready
jhon309 0:ac8863619623 1162 * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready (only applicable to STM32F0X2 USB devices)
jhon309 0:ac8863619623 1163 * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
jhon309 0:ac8863619623 1164 * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
jhon309 0:ac8863619623 1165 * @arg RCC_FLAG_OBLRST: Option Byte Load reset
jhon309 0:ac8863619623 1166 * @arg RCC_FLAG_PINRST: Pin reset
jhon309 0:ac8863619623 1167 * @arg RCC_FLAG_PORRST: POR/PDR reset
jhon309 0:ac8863619623 1168 * @arg RCC_FLAG_SFTRST: Software reset
jhon309 0:ac8863619623 1169 * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
jhon309 0:ac8863619623 1170 * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
jhon309 0:ac8863619623 1171 * @arg RCC_FLAG_LPWRRST: Low Power reset
jhon309 0:ac8863619623 1172 * @retval The new state of __FLAG__ (TRUE or FALSE).
jhon309 0:ac8863619623 1173 */
jhon309 0:ac8863619623 1174 #define RCC_FLAG_MASK ((uint8_t)0x1F)
jhon309 0:ac8863619623 1175 #define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \
jhon309 0:ac8863619623 1176 (((__FLAG__) >> 5) == CR2_REG_INDEX)? RCC->CR2 : \
jhon309 0:ac8863619623 1177 (((__FLAG__) >> 5) == BDCR_REG_INDEX) ? RCC->BDCR : \
jhon309 0:ac8863619623 1178 RCC->CSR) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))
jhon309 0:ac8863619623 1179
jhon309 0:ac8863619623 1180
jhon309 0:ac8863619623 1181
jhon309 0:ac8863619623 1182 /**
jhon309 0:ac8863619623 1183 * @}
jhon309 0:ac8863619623 1184 */
jhon309 0:ac8863619623 1185
jhon309 0:ac8863619623 1186 /**
jhon309 0:ac8863619623 1187 * @}
jhon309 0:ac8863619623 1188 */
jhon309 0:ac8863619623 1189
jhon309 0:ac8863619623 1190 /* Include RCC HAL Extension module */
jhon309 0:ac8863619623 1191 #include "stm32f0xx_hal_rcc_ex.h"
jhon309 0:ac8863619623 1192
jhon309 0:ac8863619623 1193 /* Exported functions --------------------------------------------------------*/
jhon309 0:ac8863619623 1194
jhon309 0:ac8863619623 1195 /** @addtogroup RCC_Exported_Functions
jhon309 0:ac8863619623 1196 * @{
jhon309 0:ac8863619623 1197 */
jhon309 0:ac8863619623 1198
jhon309 0:ac8863619623 1199 /** @addtogroup RCC_Exported_Functions_Group1
jhon309 0:ac8863619623 1200 * @{
jhon309 0:ac8863619623 1201 */
jhon309 0:ac8863619623 1202
jhon309 0:ac8863619623 1203 /* Initialization and de-initialization functions ***************************/
jhon309 0:ac8863619623 1204 void HAL_RCC_DeInit(void);
jhon309 0:ac8863619623 1205 HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
jhon309 0:ac8863619623 1206 HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
jhon309 0:ac8863619623 1207
jhon309 0:ac8863619623 1208 /**
jhon309 0:ac8863619623 1209 * @}
jhon309 0:ac8863619623 1210 */
jhon309 0:ac8863619623 1211
jhon309 0:ac8863619623 1212 /** @addtogroup RCC_Exported_Functions_Group2
jhon309 0:ac8863619623 1213 * @{
jhon309 0:ac8863619623 1214 */
jhon309 0:ac8863619623 1215
jhon309 0:ac8863619623 1216 /* Peripheral Control functions *********************************************/
jhon309 0:ac8863619623 1217 void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
jhon309 0:ac8863619623 1218 void HAL_RCC_EnableCSS(void);
jhon309 0:ac8863619623 1219 void HAL_RCC_DisableCSS(void);
jhon309 0:ac8863619623 1220 uint32_t HAL_RCC_GetSysClockFreq(void);
jhon309 0:ac8863619623 1221 uint32_t HAL_RCC_GetHCLKFreq(void);
jhon309 0:ac8863619623 1222 uint32_t HAL_RCC_GetPCLK1Freq(void);
jhon309 0:ac8863619623 1223 void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
jhon309 0:ac8863619623 1224 void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
jhon309 0:ac8863619623 1225
jhon309 0:ac8863619623 1226 /* CSS NMI IRQ handler */
jhon309 0:ac8863619623 1227 void HAL_RCC_NMI_IRQHandler(void);
jhon309 0:ac8863619623 1228
jhon309 0:ac8863619623 1229 /* User Callbacks in non blocking mode (IT mode) */
jhon309 0:ac8863619623 1230 void HAL_RCC_CCSCallback(void);
jhon309 0:ac8863619623 1231
jhon309 0:ac8863619623 1232 /**
jhon309 0:ac8863619623 1233 * @}
jhon309 0:ac8863619623 1234 */
jhon309 0:ac8863619623 1235
jhon309 0:ac8863619623 1236 /**
jhon309 0:ac8863619623 1237 * @}
jhon309 0:ac8863619623 1238 */
jhon309 0:ac8863619623 1239
jhon309 0:ac8863619623 1240 /**
jhon309 0:ac8863619623 1241 * @}
jhon309 0:ac8863619623 1242 */
jhon309 0:ac8863619623 1243
jhon309 0:ac8863619623 1244 /**
jhon309 0:ac8863619623 1245 * @}
jhon309 0:ac8863619623 1246 */
jhon309 0:ac8863619623 1247
jhon309 0:ac8863619623 1248 #ifdef __cplusplus
jhon309 0:ac8863619623 1249 }
jhon309 0:ac8863619623 1250 #endif
jhon309 0:ac8863619623 1251
jhon309 0:ac8863619623 1252 #endif /* __STM32F0xx_HAL_RCC_H */
jhon309 0:ac8863619623 1253
jhon309 0:ac8863619623 1254 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
jhon309 0:ac8863619623 1255