Revision 0:134a896bf705, committed 2013-11-14

Comitter:

jf1452

Date:

Thu Nov 14 14:21:22 2013 +0000

Commit message:

First code issue

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SevenSegLed.lib	Thu Nov 14 14:21:22 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/jf1452/code/SevenSegLed/#2f235ad35a6d

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Nov 14 14:21:22 2013 +0000
@@ -0,0 +1,58 @@
+#include "mbed.h"           //Include the mbed header file which contains the prototypes of the libraries used here (DigitalOut, Ticker) as well as various syntax definitions.
+#include "SevenSegLed.h"    //Include the SevenSegLed header file which contains the class for the SevenSegLed output library.
+
+// Lets define some "macros" to make the code easier to read
+
+#define mUnits D_7seg[1]     // When the compiler finds "units" it will substiute it for "D_7seg[1]"
+#define mTens  D_7seg[0]     // When the compiler finds "units" it will substiute it for "D_7seg[1]"
+#define mDot   D_dot[1]      // When the compiler finds "units" it will substiute it for "D_7seg[1]"
+
+void attimeout();            //prototype declared above main function to avoid errors.
+
+//Below is the creation of an instance of SevenSegLed called segmentled.
+//It is constructed with the information relating to the pins which are used, the type of display (common anode or cathode) and
+//the type of transition between outputs. Display mode = smooth will fade the new number in while hard will just change it immediately.
+//com1 and com2 are the pins which power each display. As we only use one pin, com1 is filled with any unused pin and com2 is filled with
+//the pin that is used for MUX. As com2 will go low when not in use the other display will be selected and the MUX effect will still work.
+//
+//                     common type (0:anode common 1:cathode common)
+//                     |
+//                     |  display mode (0:smooth 1:hard)
+//                     |  |
+//                     |  |   segA   segB   segC   segD   segE   segF   segG   segP  com1  com2
+//                     |  |    |      |      |      |      |      |      |      |     |     |
+SevenSegLed segmentled(0, 0, P1_23, P1_28, P0_16, P1_31, P1_13, P1_16, P1_19, P0_23, p21, P1_25);
+
+//Define two arrays to house the data to be outputted. D_7seg can contain digits 0-F and D_dot 0-1.
+//
+//                   0  1   //0 = leftmost digit, 1 = rightmost digit
+//                   |  |
+uint8_t D_7seg[2] = {0, 0}; // seven segment digit number    (0x00:"0", 0x01:"1", ... , 0x09:"9", 0x0A:"A", ... , 0x0F:"F", other:" ")
+uint8_t D_dot[2]  = {0, 0}; // seven segment digit dotpoint. (0:off 1:on)
+
+Ticker timeout;             //Create an instance of class Ticker called timeout.
+
+int main()
+{
+
+    timeout.attach_us(&attimeout, 500000);            //Call attach function in timeout instance to call attimeout() every 500,000us (half a second).
+
+    for(;;) {
+        segmentled.SevenSegLed_main(D_7seg, D_dot);   //Repeatedly call the Segment output function to keep the displays multiplexed.
+    }
+}
+
+void attimeout()                //Timer interrupt routine.
+{
+    mDot = 1 - mDot;
+    if (mDot == 1) {
+        mUnits++;               // This means the same as D_7seg[0] = D_7seg[0] + 1; Increment "units" digit
+        if (mUnits > 9) {       // "units" digit should be in the range 0 -> 9
+            mUnits = 0;         // Reset the "units" to 0
+            mTens++;            // Increment "tens" digit
+            if (mTens > 9) {    // "tens" digit should be in the range 0 -> 9
+                mTens = 0;      // Reset the "tens" to 0
+            }
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.lib	Thu Nov 14 14:21:22 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/#f37f3b9c9f0b