Jea Du Kim
This is the first version of the mbed program for the Smart Car Seat developed by the Smart Car Seat Team of GaTech Design Expo Spring 2017.
Dependencies: Adafruit_FONA FSR SDFileSystem mbed
You are viewing an older revision! See the latest version
Homepage
Team Members¶
Bryan Bates – OBD/Bluetooth System
Robert Dunkin – Physical Wiring/Power
Jgenisius Harris – Cooling System
Jea Du Kim – Sensor System
Emily Pitts – Smartphone Application
Tyler Woei-A-Sack – GSM Communications
Advisor¶
Dr. Mick West
Overview¶
The purpose of this project was to design a child’s safety car seat with Internet of Things capabilities and a cooling system that activates in the case of an emergency. It is comprised of a network of sensors, a wireless notification system, and a cooling system.
How Does It Work¶
The Smart Car Seat is initially set up using a smartphone application where the user inputs their phone number. The number is saved to an SD card and is read by the GSM module when it sends the text messages. If the infrared thermometers read a critical temperature and the force sensitive resistors detect someone, the cooling system will turn on and a text message will be sent to the phone number on file.
Components¶
This project involves the usage of the mbed LPC1768.
Force Sensitive Resistors¶
This project uses 4 Square FSR Interlink 406, placed two on the seat and two on the back rest to detect if someone is sitting on the seat.
| mbed | FSR |
|---|---|
| p20 | FSR Bottom Left |
| p19 | FSR Upper Left |
| p18 | FSR Upper Right |
| p17 | FSR Bottom Right |
As they are still resistors, the orientation of the pins do not matter, as long as one end goes into VCC and the other leads to a voltage divider and an AnalogIn like shown in the diagram.
Any additional information can be found at the Force Sensitive Resistors page.
Import library
Public Member Functions |
|
| FSR (PinName Pin, float resistance) | |
|
Create an
FSR
object.
|
|
| float | readRaw () |
|
Read the raw data.
|
|
| float | readFSRResistance () |
|
Read the resistance of the
FSR
.
|
|
| float | readWeight () |
|
Read the weight in N.
|
|
MLX90614 IR Thermometers¶
This project uses two MLX90614 IR Thermometer placed on the back of the headrest to measure the temperature of the child sitting on the seat and the ambient temperature.
| mbed | FSR | Pullups |
|---|---|---|
| gnd | VSS - gnd | |
| Vout | VDD - 3.3V | |
| p27 | SCL - I2C Clock | 10K |
| p28 | SDA - I2C Data | 10K |
The default I2C address for the MLX90614 is 0x5A, but it can be changed with this program.
Import programMLX90614 IR_Temp_Sensor (change address)
I have spent so much time looking into how to change the address of a MLX90614 sensor for use of multiple sensors, so I think it might be helpful to somebody.
Last commit 05 Mar 2016 by 
Ronaldas G
Any additional information can be found at the MLX90614 I2C IR Thermometer page.
SD Card File System¶
| mbed | MicroSD Breakout |
|---|---|
| p8 (DigitalOut) | CS |
| p5 (SPI MOSI) | DI |
| Vout | VCC |
| p7 (SPI SCLK) | SCK |
| GND | GND |
| p6 (SPI MISO) | DO |
| nc | CD |
This project uses the basic SD Card reader that works with the mbed to store all the contact information for the system.
Any additional information can be found at the SD Card File System page.
GSM Module¶
| mbed | Adafruit FONA |
|---|---|
| nc | Bat |
| GND | GND |
| nc | SPKR+ |
| nc | SPKR- |
| p12 | Rst |
| nc | PS |
| GND | Key |
| p11 | RI |
| p14 (Serial RX) | TX |
| p13 (Serial TX) | RX |
| nc | NS |
| Vout (3.3V) | Vio |
This project used the FONA 808 MiniGSM provided from Adafruit to send messages to the contact information stored in the SD Card. Both the 800 and the 808 uses the same protocols. Any additional documentations, information, and project libraries can be found at the Adafruit FONA 800 Project page.
Import library
Data Structures |
|
| class | EventListener |
|
Listener for FONA events.
More...
|
|
Public Member Functions |
|
| Adafruit_FONA (PinName tx, PinName rx, PinName rst, PinName ringIndicator) | |
|
Create instance of the
Adafruit_FONA
.
|
|
| bool | begin (int baudrate) |
|
Built-in Test to see if FONA is connected.
|
|
| void | setEventListener ( EventListener *eventListener) |
|
Set the event listener for incoming calls.
|
|
| int | readable (void) |
|
Check if FONA has anything in its output buffer.
|
|
| bool | getADCVoltage (uint16_t *v) |
|
Get ADC voltage from external pin.
|
|
| bool | getBattPercent (uint16_t *p) |
|
Get battery percentage level.
|
|
| bool | getBattVoltage (uint16_t *v) |
|
Get battery voltage level.
|
|
| bool | unlockSIM (char *pin) |
|
Unlock SIM if needed.
|
|
| uint8_t | getSIMCCID (char *ccid) |
|
Get the SIM chip card interface device (CCID)
|
|
| uint8_t | getNetworkStatus (void) |
|
Get the Network Status of FONA.
|
|
| uint8_t | getRSSI (void) |
|
Get the RSSI of the network signal.
|
|
| uint8_t | getIMEI (char *imei) |
|
Get the International Mobile Station Equipment Identity (IMEI)
|
|
| bool | setAudio (uint8_t a) |
|
Set the Audio Output interface.
|
|
| bool | setVolume (uint8_t i) |
|
Set the Audio Volume.
|
|
| uint8_t | getVolume (void) |
|
Get the Audio Volume.
|
|
| bool | tuneFMradio (uint16_t station) |
|
Tune the FM radio.
|
|
| bool | FMradio (bool onoff, uint8_t a=FONA_HEADSETAUDIO) |
|
FM radio set output.
|
|
| bool | setFMVolume (uint8_t i) |
|
Set the FM Radio Volume.
|
|
| int8_t | getFMVolume () |
|
Get the FM Volume.
|
|
| int8_t | getFMSignalLevel (uint16_t station) |
|
Get the FM signal strength.
|
|
| bool | setSMSInterrupt (uint8_t i) |
|
Set the SMS Interrupt.
|
|
| uint8_t | getSMSInterrupt (void) |
|
Get SMS Interrupt Setting.
|
|
| int8_t | getNumSMS (void) |
|
Set the SMS Interrupt.
|
|
| bool | readSMS (uint8_t i, char *smsbuff, uint16_t max, uint16_t *readsize) |
|
Read SMS.
|
|
| bool | sendSMS (char *smsaddr, char *smsmsg) |
|
Send SMS.
|
|
| bool | deleteSMS (uint8_t i) |
|
Delete SMS.
|
|
| bool | getSMSSender (uint8_t i, char *sender, int senderlen) |
|
Send SMS.
|
|
| bool | enableNetworkTimeSync (bool onoff) |
|
Enable FONA to sync time with the cellular network.
|
|
| bool | enableNTPTimeSync (bool onoff, const char *ntpserver=0) |
|
Enable FONA to sync time with the time server.
|
|
| bool | getTime (char *buff, uint16_t maxlen) |
|
Retrieve the current time from the enabled server.
|
|
| bool | setPWM (uint16_t period, uint8_t duty=50) |
|
Control the buzzer capability of the PWM out on the FONA.
|
|
| bool | callPhone (char *phonenum) |
|
Call a phone.
|
|
| bool | hangUp (void) |
|
Hang up a phone call.
|
|
| bool | pickUp (void) |
|
Answer a phone call.
|
|
| bool | callerIdNotification (bool enable) |
|
Enable/disable caller ID.
|
|
| bool | incomingCallNumber (char *phonenum) |
|
Retrieve the incoming call number.
|
|
Bluetooth Module¶
| mbed | Bluetooth |
|---|---|
| p9 (TX) | RX |
| p10 (RX) | TX |
| GND | GND |
| Vout | VCC |
This project uses the HC-05 Bluetooth Module to connect with an Android app to update or change contact information stored in the SD Card. The Bluetooth module simple acts as a wireless Serial connection, so there is no need for additional Libraries other than the Serial.
Any additional information about Serial connections can be found at the Serial page.
Import librarymbed
Cooling System¶
| mbed | MOSFET Relay | Cooling System |
|---|---|---|
| gnd | JP2-2 - gnd | |
| 5V | JP2-1 - RAW | |
| p16 | JP2-3 - Control | |
| JP1-1 | Device (Neg) | |
| JP1-2 | Device (Pos) |
The Cooling System involves the use of a MOSFET Relay and a combination of 5V Fans, Peltier Plates, and Heatsinks to provide cold air when commanded to.
Any additional information about Relays can be found here.