Janek Mann
mbed library sources modified for open wear
Dependents: openwear-lifelogger-example
Fork of
mbed-src
by 
mbed official
Diff: targets/hal/TARGET_NXP/TARGET_LPC43XX/pwmout_api.c
- Revision:
- 256:76fd9a263045
- Child:
- 286:31249416b6f9
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/pwmout_api.c Tue Jul 15 07:45:08 2014 +0100
@@ -0,0 +1,266 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Ported to NXP LPC43XX by Micromint USA <support@micromint.com>
+ */
+#include "mbed_assert.h"
+#include "pwmout_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "error.h"
+
+// PWM implementation for the LPC43xx using State Configurable Timer (SCT)
+// * PWM_0 to PWM_15 on mbed use CTOUT_0 to CTOUT_15 outputs on LPC43xx
+// * Event 0 is PWM period, events 1 to PWM_EVENT_MAX are PWM channels
+// * Default is unified 32-bit timer, but could be configured to use
+// a 16-bit timer so a timer is available for other SCT functions
+
+// configuration options
+#define PWM_FREQ_BASE 1000000 // Base frequency 1 MHz = 1000000
+#define PWM_MODE 1 // 0 = 32-bit, 1 = 16-bit low, 2 = 16-bit high
+
+// macros
+#define PWM_SETCOUNT(x) (x - 1) // set count value
+#define PWM_GETCOUNT(x) (x + 1) // get count value
+#if (PWM_MODE == 0) // unified 32-bit counter, events 1 to 15
+ #define PWM_EVENT_MAX (CONFIG_SCT_nEV - 1) // Max PWM channels
+ #define PWM_CONFIG SCT_CONFIG_32BIT_COUNTER // default config
+ #define PWM_CTRL &LPC_SCT->CTRL_U // control register
+ #define PWM_HALT SCT_CTRL_HALT_L // halt counter
+ #define PWM_CLEAR SCT_CTRL_CLRCTR_L // clock clear
+ #define PWM_PRE(x) SCT_CTRL_PRE_L(x) // clock prescale
+ #define PWM_EVT_MASK (1 << 12) // event control mask
+ #define PWM_LIMIT &LPC_SCT->LIMIT_L // limit register
+ #define PWM_MATCH(x) &LPC_SCT->MATCH[x].U // match register
+ #define PWM_MR(x) &LPC_SCT->MATCHREL[x].U // 32-bit match reload register
+#elif (PWM_MODE == 1) // 16-bit low counter, events 1 to 7
+ #define PWM_EVENT_MAX (CONFIG_SCT_nEV/2 - 1) // Max PWM channels
+ #define PWM_CONFIG SCT_CONFIG_16BIT_COUNTER // default config
+ #define PWM_CTRL &LPC_SCT->CTRL_L // control register
+ #define PWM_HALT SCT_CTRL_HALT_L // halt counter
+ #define PWM_CLEAR SCT_CTRL_CLRCTR_L // clock clear
+ #define PWM_PRE(x) SCT_CTRL_PRE_L(x) // clock prescale
+ #define PWM_EVT_MASK (1 << 12) // event control mask
+ #define PWM_LIMIT &LPC_SCT->LIMIT_L // limit register
+ #define PWM_MATCH(x) &LPC_SCT->MATCH[x].L // match register
+ #define PWM_MR(x) &LPC_SCT->MATCHREL[x].L // 16-bit match reload register
+#elif (PWM_MODE == 2) // 16-bit high counter, events 1 to 7
+ // [TODO] use events 8 to 15 on mode 2
+ #define PWM_EVENT_MAX (CONFIG_SCT_nEV/2 - 1) // Max PWM channels
+ #define PWM_CONFIG SCT_CONFIG_16BIT_COUNTER // default config
+ #define PWM_CTRL &LPC_SCT->CTRL_H // control register
+ #define PWM_HALT SCT_CTRL_HALT_L // halt counter
+ #define PWM_CLEAR SCT_CTRL_CLRCTR_L // clock clear
+ #define PWM_PRE(x) SCT_CTRL_PRE_L(x) // clock prescale
+ #define PWM_EVT_MASK ((1 << 4) | (1 << 12)) // event control mask
+ #define PWM_LIMIT &LPC_SCT->LIMIT_H // limit register
+ #define PWM_MATCH(x) &LPC_SCT->MATCH[x].H // match register
+ #define PWM_MR(x) &LPC_SCT->MATCHREL[x].H // 16-bit match reload register
+#else
+ #error "PWM mode not implemented"
+#endif
+#define PWM_MR0 PWM_MR(0) // MR register 0 is for period
+
+static uint8_t event = 0;
+
+// PORT ID, PWM ID, Pin function
+static const PinMap PinMap_PWM[] = {
+ {P1_1, PWM_7, (SCU_PINIO_FAST | 1)},
+ {P1_2, PWM_6, (SCU_PINIO_FAST | 1)},
+ {P1_3, PWM_8, (SCU_PINIO_FAST | 1)},
+ {P1_4, PWM_9, (SCU_PINIO_FAST | 1)},
+ {P1_5, PWM_10, (SCU_PINIO_FAST | 1)},
+ {P1_7, PWM_13, (SCU_PINIO_FAST | 2)},
+ {P1_8, PWM_12, (SCU_PINIO_FAST | 2)},
+ {P1_9, PWM_11, (SCU_PINIO_FAST | 2)},
+ {P1_10, PWM_14, (SCU_PINIO_FAST | 2)},
+ {P1_11, PWM_15, (SCU_PINIO_FAST | 2)},
+ {P2_7, PWM_1, (SCU_PINIO_FAST | 1)},
+ {P2_8, PWM_0, (SCU_PINIO_FAST | 1)},
+ {P2_9, PWM_3, (SCU_PINIO_FAST | 1)},
+ {P2_10, PWM_2, (SCU_PINIO_FAST | 1)},
+ {P2_11, PWM_5, (SCU_PINIO_FAST | 1)},
+ {P2_12, PWM_4, (SCU_PINIO_FAST | 1)},
+ {P4_1, PWM_1, (SCU_PINIO_FAST | 1)},
+ {P4_2, PWM_0, (SCU_PINIO_FAST | 1)},
+ {P4_3, PWM_3, (SCU_PINIO_FAST | 1)},
+ {P4_4, PWM_2, (SCU_PINIO_FAST | 1)},
+ {P4_5, PWM_5, (SCU_PINIO_FAST | 1)},
+ {P4_6, PWM_4, (SCU_PINIO_FAST | 1)},
+ {P6_5, PWM_6, (SCU_PINIO_FAST | 1)},
+ {P6_12, PWM_7, (SCU_PINIO_FAST | 1)},
+ {P7_0, PWM_14, (SCU_PINIO_FAST | 1)},
+ {P7_1, PWM_15, (SCU_PINIO_FAST | 1)},
+ {P7_4, PWM_13, (SCU_PINIO_FAST | 1)},
+ {P7_5, PWM_12, (SCU_PINIO_FAST | 1)},
+ {P7_6, PWM_11, (SCU_PINIO_FAST | 1)},
+ {P7_7, PWM_8, (SCU_PINIO_FAST | 1)},
+ {PA_4, PWM_9, (SCU_PINIO_FAST | 1)},
+ {PB_0, PWM_10, (SCU_PINIO_FAST | 1)},
+ {PB_1, PWM_6, (SCU_PINIO_FAST | 5)},
+ {PB_2, PWM_7, (SCU_PINIO_FAST | 5)},
+ {PB_3, PWM_8, (SCU_PINIO_FAST | 5)},
+ {PD_0, PWM_15, (SCU_PINIO_FAST | 1)},
+ {PD_2, PWM_7, (SCU_PINIO_FAST | 1)},
+ {PD_3, PWM_6, (SCU_PINIO_FAST | 1)},
+ {PD_4, PWM_8, (SCU_PINIO_FAST | 1)},
+ {PD_5, PWM_9, (SCU_PINIO_FAST | 1)},
+ {PD_6, PWM_10, (SCU_PINIO_FAST | 1)},
+ {PD_9, PWM_13, (SCU_PINIO_FAST | 1)},
+ {PD_11, PWM_14, (SCU_PINIO_FAST | 6)},
+ {PD_12, PWM_10, (SCU_PINIO_FAST | 6)},
+ {PD_13, PWM_13, (SCU_PINIO_FAST | 6)},
+ {PD_14, PWM_11, (SCU_PINIO_FAST | 6)},
+ {PD_15, PWM_8, (SCU_PINIO_FAST | 6)},
+ {PD_16, PWM_12, (SCU_PINIO_FAST | 6)},
+ {PE_5, PWM_3, (SCU_PINIO_FAST | 1)},
+ {PE_6, PWM_2, (SCU_PINIO_FAST | 1)},
+ {PE_7, PWM_5, (SCU_PINIO_FAST | 1)},
+ {PE_8, PWM_4, (SCU_PINIO_FAST | 1)},
+ {PE_11, PWM_12, (SCU_PINIO_FAST | 1)},
+ {PE_12, PWM_11, (SCU_PINIO_FAST | 1)},
+ {PE_13, PWM_14, (SCU_PINIO_FAST | 1)},
+ {PE_15, PWM_0, (SCU_PINIO_FAST | 1)},
+ {PF_9, PWM_1, (SCU_PINIO_FAST | 2)},
+ {NC, NC, 0}
+};
+
+static unsigned int pwm_clock_mhz;
+
+static void _pwmout_dev_init() {
+ uint32_t i;
+
+ // set SCT clock and config
+ LPC_CCU1->CLKCCU[CLK_MX_SCT].CFG = (1 << 0); // enable SCT clock in CCU1
+ LPC_SCT->CONFIG |= PWM_CONFIG; // set config options
+ *PWM_CTRL |= PWM_HALT; // set HALT bit to stop counter
+ // clear counter and set prescaler for desired freq
+ *PWM_CTRL |= PWM_CLEAR | PWM_PRE(SystemCoreClock / PWM_FREQ_BASE - 1);
+ pwm_clock_mhz = PWM_FREQ_BASE / 1000000;
+
+ // configure SCT events
+ for (i = 0; i < PWM_EVENT_MAX; i++) {
+ *PWM_MATCH(i) = 0; // match register
+ *PWM_MR(i) = 0; // match reload register
+ LPC_SCT->EVENT[i].STATE = 0xFFFFFFFF; // event happens in all states
+ LPC_SCT->EVENT[i].CTRL = (i << 0) | PWM_EVT_MASK; // match condition only
+ }
+ *PWM_LIMIT = (1 << 0) ; // set event 0 as limit
+ // initialize period to 20ms: standard for servos, and fine for e.g. brightness control
+ *PWM_MR0 = PWM_SETCOUNT((uint32_t)(((20 * PWM_FREQ_BASE) / 1000000) * 1000));
+
+ // initialize SCT outputs
+ for (i = 0; i < CONFIG_SCT_nOU; i++) {
+ LPC_SCT->OUT[i].SET = (1 << 0); // event 0 will set SCTOUT_xx
+ LPC_SCT->OUT[i].CLR = 0; // set clear event when duty cycle
+ }
+ LPC_SCT->OUTPUT = 0; // default outputs to clear
+
+ *PWM_CTRL &= ~PWM_HALT; // clear HALT bit to start counter
+}
+
+void pwmout_init(pwmout_t* obj, PinName pin) {
+ // determine the channel
+ PWMName pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+ MBED_ASSERT((pwm != (PWMName)NC) && (event < PWM_EVENT_MAX));
+
+ // init SCT clock and outputs on first PWM init
+ if (event == 0) {
+ _pwmout_dev_init();
+ }
+ // init PWM object
+ event++;
+ obj->pwm = pwm; // pwm output
+ obj->mr = event; // index of match reload register
+
+ // initial duty cycle is 0
+ pwmout_write(obj, 0);
+
+ // Wire pinout
+ pinmap_pinout(pin, PinMap_PWM);
+}
+
+void pwmout_free(pwmout_t* obj) {
+ // [TODO]
+}
+
+void pwmout_write(pwmout_t* obj, float value) {
+ if (value < 0.0f) {
+ value = 0.0;
+ } else if (value > 1.0f) {
+ value = 1.0;
+ }
+
+ // set new pulse width
+ uint32_t us = (uint32_t)((float)PWM_GETCOUNT(*PWM_MR0) * value) * pwm_clock_mhz;
+ pwmout_pulsewidth_us(obj, us);
+}
+
+float pwmout_read(pwmout_t* obj) {
+ float v = (float)PWM_GETCOUNT(*PWM_MR(obj->mr)) / (float)PWM_GETCOUNT(*PWM_MR0);
+ return (v > 1.0f) ? (1.0f) : (v);
+}
+
+void pwmout_period(pwmout_t* obj, float seconds) {
+ pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms) {
+ pwmout_period_us(obj, ms * 1000);
+}
+
+// Set the PWM period, keeping the duty cycle the same.
+void pwmout_period_us(pwmout_t* obj, int us) {
+ // calculate number of ticks
+ uint32_t ticks = pwm_clock_mhz * us;
+ uint32_t old_ticks = PWM_GETCOUNT(*PWM_MR0);
+ uint32_t i, v;
+
+ // set new period
+ *PWM_MR0 = PWM_SETCOUNT(ticks);
+
+ // Scale pulse widths to preserve the duty ratio
+ for (i = 1; i < PWM_EVENT_MAX; i++) {
+ v = PWM_GETCOUNT(*PWM_MR(i));
+ if (v > 1) {
+ v = (v * ticks) / old_ticks;
+ *PWM_MR(i) = PWM_SETCOUNT(v);
+ }
+ }
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
+ pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
+ pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
+ // calculate number of ticks
+ uint32_t v = pwm_clock_mhz * us;
+ //MBED_ASSERT(PWM_GETCOUNT(*PWM_MR0) >= v);
+
+ if (v > 0) {
+ // set new match register value and enable SCT output
+ *PWM_MR(obj->mr) = PWM_SETCOUNT(v);
+ LPC_SCT->OUT[obj->pwm].CLR = (1 << obj->mr); // on event will clear PWM_XX
+ } else {
+ // set match to zero and disable SCT output
+ *PWM_MR(obj->mr) = 0;
+ LPC_SCT->OUT[obj->pwm].CLR = 0;
+ }
+}