mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pwr_ex.h@637:ed69428d4850, 2015-12-22 (annotated)
- Committer:
- jaerts
- Date:
- Tue Dec 22 13:22:16 2015 +0000
- Revision:
- 637:ed69428d4850
- Parent:
- 610:813dcc80987e
Add very shady LPC1768 CAN Filter implementation
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 573:ad23fe03a082 | 1 | /** |
mbed_official | 573:ad23fe03a082 | 2 | ****************************************************************************** |
mbed_official | 573:ad23fe03a082 | 3 | * @file stm32f7xx_hal_pwr_ex.h |
mbed_official | 573:ad23fe03a082 | 4 | * @author MCD Application Team |
mbed_official | 610:813dcc80987e | 5 | * @version V1.0.1 |
mbed_official | 610:813dcc80987e | 6 | * @date 25-June-2015 |
mbed_official | 573:ad23fe03a082 | 7 | * @brief Header file of PWR HAL Extension module. |
mbed_official | 573:ad23fe03a082 | 8 | ****************************************************************************** |
mbed_official | 573:ad23fe03a082 | 9 | * @attention |
mbed_official | 573:ad23fe03a082 | 10 | * |
mbed_official | 573:ad23fe03a082 | 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
mbed_official | 573:ad23fe03a082 | 12 | * |
mbed_official | 573:ad23fe03a082 | 13 | * Redistribution and use in source and binary forms, with or without modification, |
mbed_official | 573:ad23fe03a082 | 14 | * are permitted provided that the following conditions are met: |
mbed_official | 573:ad23fe03a082 | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
mbed_official | 573:ad23fe03a082 | 16 | * this list of conditions and the following disclaimer. |
mbed_official | 573:ad23fe03a082 | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
mbed_official | 573:ad23fe03a082 | 18 | * this list of conditions and the following disclaimer in the documentation |
mbed_official | 573:ad23fe03a082 | 19 | * and/or other materials provided with the distribution. |
mbed_official | 573:ad23fe03a082 | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
mbed_official | 573:ad23fe03a082 | 21 | * may be used to endorse or promote products derived from this software |
mbed_official | 573:ad23fe03a082 | 22 | * without specific prior written permission. |
mbed_official | 573:ad23fe03a082 | 23 | * |
mbed_official | 573:ad23fe03a082 | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
mbed_official | 573:ad23fe03a082 | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
mbed_official | 573:ad23fe03a082 | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
mbed_official | 573:ad23fe03a082 | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
mbed_official | 573:ad23fe03a082 | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
mbed_official | 573:ad23fe03a082 | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
mbed_official | 573:ad23fe03a082 | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
mbed_official | 573:ad23fe03a082 | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
mbed_official | 573:ad23fe03a082 | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
mbed_official | 573:ad23fe03a082 | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
mbed_official | 573:ad23fe03a082 | 34 | * |
mbed_official | 573:ad23fe03a082 | 35 | ****************************************************************************** |
mbed_official | 573:ad23fe03a082 | 36 | */ |
mbed_official | 573:ad23fe03a082 | 37 | |
mbed_official | 573:ad23fe03a082 | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 39 | #ifndef __STM32F7xx_HAL_PWR_EX_H |
mbed_official | 573:ad23fe03a082 | 40 | #define __STM32F7xx_HAL_PWR_EX_H |
mbed_official | 573:ad23fe03a082 | 41 | |
mbed_official | 573:ad23fe03a082 | 42 | #ifdef __cplusplus |
mbed_official | 573:ad23fe03a082 | 43 | extern "C" { |
mbed_official | 573:ad23fe03a082 | 44 | #endif |
mbed_official | 573:ad23fe03a082 | 45 | |
mbed_official | 573:ad23fe03a082 | 46 | /* Includes ------------------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 47 | #include "stm32f7xx_hal_def.h" |
mbed_official | 573:ad23fe03a082 | 48 | |
mbed_official | 573:ad23fe03a082 | 49 | /** @addtogroup STM32F7xx_HAL_Driver |
mbed_official | 573:ad23fe03a082 | 50 | * @{ |
mbed_official | 573:ad23fe03a082 | 51 | */ |
mbed_official | 573:ad23fe03a082 | 52 | |
mbed_official | 573:ad23fe03a082 | 53 | /** @addtogroup PWREx |
mbed_official | 573:ad23fe03a082 | 54 | * @{ |
mbed_official | 573:ad23fe03a082 | 55 | */ |
mbed_official | 573:ad23fe03a082 | 56 | |
mbed_official | 573:ad23fe03a082 | 57 | /* Exported types ------------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 58 | /* Exported constants --------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 59 | /** @defgroup PWREx_Exported_Constants PWREx Exported Constants |
mbed_official | 573:ad23fe03a082 | 60 | * @{ |
mbed_official | 573:ad23fe03a082 | 61 | */ |
mbed_official | 573:ad23fe03a082 | 62 | /** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins |
mbed_official | 573:ad23fe03a082 | 63 | * @{ |
mbed_official | 573:ad23fe03a082 | 64 | */ |
mbed_official | 573:ad23fe03a082 | 65 | #define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1 |
mbed_official | 573:ad23fe03a082 | 66 | #define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2 |
mbed_official | 573:ad23fe03a082 | 67 | #define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3 |
mbed_official | 573:ad23fe03a082 | 68 | #define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4 |
mbed_official | 573:ad23fe03a082 | 69 | #define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5 |
mbed_official | 573:ad23fe03a082 | 70 | #define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6 |
mbed_official | 573:ad23fe03a082 | 71 | #define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1 |
mbed_official | 573:ad23fe03a082 | 72 | #define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2 |
mbed_official | 573:ad23fe03a082 | 73 | #define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3 |
mbed_official | 573:ad23fe03a082 | 74 | #define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4 |
mbed_official | 573:ad23fe03a082 | 75 | #define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5 |
mbed_official | 573:ad23fe03a082 | 76 | #define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6 |
mbed_official | 573:ad23fe03a082 | 77 | #define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1) |
mbed_official | 573:ad23fe03a082 | 78 | #define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2) |
mbed_official | 573:ad23fe03a082 | 79 | #define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3) |
mbed_official | 573:ad23fe03a082 | 80 | #define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4) |
mbed_official | 573:ad23fe03a082 | 81 | #define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5) |
mbed_official | 573:ad23fe03a082 | 82 | #define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6) |
mbed_official | 573:ad23fe03a082 | 83 | |
mbed_official | 573:ad23fe03a082 | 84 | /** |
mbed_official | 573:ad23fe03a082 | 85 | * @} |
mbed_official | 573:ad23fe03a082 | 86 | */ |
mbed_official | 573:ad23fe03a082 | 87 | |
mbed_official | 573:ad23fe03a082 | 88 | /** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode |
mbed_official | 573:ad23fe03a082 | 89 | * @{ |
mbed_official | 573:ad23fe03a082 | 90 | */ |
mbed_official | 573:ad23fe03a082 | 91 | #define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS |
mbed_official | 573:ad23fe03a082 | 92 | #define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS)) |
mbed_official | 573:ad23fe03a082 | 93 | /** |
mbed_official | 573:ad23fe03a082 | 94 | * @} |
mbed_official | 573:ad23fe03a082 | 95 | */ |
mbed_official | 573:ad23fe03a082 | 96 | |
mbed_official | 573:ad23fe03a082 | 97 | /** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag |
mbed_official | 573:ad23fe03a082 | 98 | * @{ |
mbed_official | 573:ad23fe03a082 | 99 | */ |
mbed_official | 573:ad23fe03a082 | 100 | #define PWR_FLAG_ODRDY PWR_CSR1_ODRDY |
mbed_official | 573:ad23fe03a082 | 101 | #define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY |
mbed_official | 573:ad23fe03a082 | 102 | #define PWR_FLAG_UDRDY PWR_CSR1_UDSWRDY |
mbed_official | 573:ad23fe03a082 | 103 | /** |
mbed_official | 573:ad23fe03a082 | 104 | * @} |
mbed_official | 573:ad23fe03a082 | 105 | */ |
mbed_official | 573:ad23fe03a082 | 106 | |
mbed_official | 573:ad23fe03a082 | 107 | /** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags |
mbed_official | 573:ad23fe03a082 | 108 | * @{ |
mbed_official | 573:ad23fe03a082 | 109 | */ |
mbed_official | 573:ad23fe03a082 | 110 | #define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1 |
mbed_official | 573:ad23fe03a082 | 111 | #define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2 |
mbed_official | 573:ad23fe03a082 | 112 | #define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3 |
mbed_official | 573:ad23fe03a082 | 113 | #define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4 |
mbed_official | 573:ad23fe03a082 | 114 | #define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5 |
mbed_official | 573:ad23fe03a082 | 115 | #define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6 |
mbed_official | 573:ad23fe03a082 | 116 | /** |
mbed_official | 573:ad23fe03a082 | 117 | * @} |
mbed_official | 573:ad23fe03a082 | 118 | */ |
mbed_official | 573:ad23fe03a082 | 119 | |
mbed_official | 573:ad23fe03a082 | 120 | /** |
mbed_official | 573:ad23fe03a082 | 121 | * @} |
mbed_official | 573:ad23fe03a082 | 122 | */ |
mbed_official | 573:ad23fe03a082 | 123 | |
mbed_official | 573:ad23fe03a082 | 124 | /* Exported macro ------------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 125 | /** @defgroup PWREx_Exported_Macro PWREx Exported Macro |
mbed_official | 573:ad23fe03a082 | 126 | * @{ |
mbed_official | 573:ad23fe03a082 | 127 | */ |
mbed_official | 573:ad23fe03a082 | 128 | /** @brief Macros to enable or disable the Over drive mode. |
mbed_official | 573:ad23fe03a082 | 129 | */ |
mbed_official | 573:ad23fe03a082 | 130 | #define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN) |
mbed_official | 573:ad23fe03a082 | 131 | #define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN)) |
mbed_official | 573:ad23fe03a082 | 132 | |
mbed_official | 573:ad23fe03a082 | 133 | /** @brief Macros to enable or disable the Over drive switching. |
mbed_official | 573:ad23fe03a082 | 134 | */ |
mbed_official | 573:ad23fe03a082 | 135 | #define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN) |
mbed_official | 573:ad23fe03a082 | 136 | #define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN)) |
mbed_official | 573:ad23fe03a082 | 137 | |
mbed_official | 573:ad23fe03a082 | 138 | /** @brief Macros to enable or disable the Under drive mode. |
mbed_official | 573:ad23fe03a082 | 139 | * @note This mode is enabled only with STOP low power mode. |
mbed_official | 573:ad23fe03a082 | 140 | * In this mode, the 1.2V domain is preserved in reduced leakage mode. This |
mbed_official | 573:ad23fe03a082 | 141 | * mode is only available when the main regulator or the low power regulator |
mbed_official | 573:ad23fe03a082 | 142 | * is in low voltage mode. |
mbed_official | 573:ad23fe03a082 | 143 | * @note If the Under-drive mode was enabled, it is automatically disabled after |
mbed_official | 573:ad23fe03a082 | 144 | * exiting Stop mode. |
mbed_official | 573:ad23fe03a082 | 145 | * When the voltage regulator operates in Under-drive mode, an additional |
mbed_official | 573:ad23fe03a082 | 146 | * startup delay is induced when waking up from Stop mode. |
mbed_official | 573:ad23fe03a082 | 147 | */ |
mbed_official | 573:ad23fe03a082 | 148 | #define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN) |
mbed_official | 573:ad23fe03a082 | 149 | #define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN)) |
mbed_official | 573:ad23fe03a082 | 150 | |
mbed_official | 573:ad23fe03a082 | 151 | /** @brief Check PWR flag is set or not. |
mbed_official | 573:ad23fe03a082 | 152 | * @param __FLAG__: specifies the flag to check. |
mbed_official | 573:ad23fe03a082 | 153 | * This parameter can be one of the following values: |
mbed_official | 573:ad23fe03a082 | 154 | * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode |
mbed_official | 573:ad23fe03a082 | 155 | * is ready |
mbed_official | 573:ad23fe03a082 | 156 | * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode |
mbed_official | 573:ad23fe03a082 | 157 | * switching is ready |
mbed_official | 573:ad23fe03a082 | 158 | * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode |
mbed_official | 573:ad23fe03a082 | 159 | * is enabled in Stop mode |
mbed_official | 573:ad23fe03a082 | 160 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
mbed_official | 573:ad23fe03a082 | 161 | */ |
mbed_official | 573:ad23fe03a082 | 162 | #define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) |
mbed_official | 573:ad23fe03a082 | 163 | |
mbed_official | 573:ad23fe03a082 | 164 | /** @brief Clear the Under-Drive Ready flag. |
mbed_official | 573:ad23fe03a082 | 165 | */ |
mbed_official | 573:ad23fe03a082 | 166 | #define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY) |
mbed_official | 573:ad23fe03a082 | 167 | |
mbed_official | 573:ad23fe03a082 | 168 | /** @brief Check Wake Up flag is set or not. |
mbed_official | 573:ad23fe03a082 | 169 | * @param __WUFLAG__: specifies the Wake Up flag to check. |
mbed_official | 573:ad23fe03a082 | 170 | * This parameter can be one of the following values: |
mbed_official | 573:ad23fe03a082 | 171 | * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 |
mbed_official | 573:ad23fe03a082 | 172 | * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 |
mbed_official | 573:ad23fe03a082 | 173 | * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 |
mbed_official | 573:ad23fe03a082 | 174 | * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 |
mbed_official | 573:ad23fe03a082 | 175 | * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 |
mbed_official | 573:ad23fe03a082 | 176 | * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 |
mbed_official | 573:ad23fe03a082 | 177 | */ |
mbed_official | 573:ad23fe03a082 | 178 | #define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__)) |
mbed_official | 573:ad23fe03a082 | 179 | |
mbed_official | 573:ad23fe03a082 | 180 | /** @brief Clear the WakeUp pins flags. |
mbed_official | 573:ad23fe03a082 | 181 | * @param __WUFLAG__: specifies the Wake Up pin flag to clear. |
mbed_official | 573:ad23fe03a082 | 182 | * This parameter can be one of the following values: |
mbed_official | 573:ad23fe03a082 | 183 | * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 |
mbed_official | 573:ad23fe03a082 | 184 | * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 |
mbed_official | 573:ad23fe03a082 | 185 | * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 |
mbed_official | 573:ad23fe03a082 | 186 | * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 |
mbed_official | 573:ad23fe03a082 | 187 | * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 |
mbed_official | 573:ad23fe03a082 | 188 | * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 |
mbed_official | 573:ad23fe03a082 | 189 | */ |
mbed_official | 573:ad23fe03a082 | 190 | #define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__)) |
mbed_official | 573:ad23fe03a082 | 191 | /** |
mbed_official | 573:ad23fe03a082 | 192 | * @} |
mbed_official | 573:ad23fe03a082 | 193 | */ |
mbed_official | 573:ad23fe03a082 | 194 | /* Exported functions --------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 195 | /** @addtogroup PWREx_Exported_Functions PWREx Exported Functions |
mbed_official | 573:ad23fe03a082 | 196 | * @{ |
mbed_official | 573:ad23fe03a082 | 197 | */ |
mbed_official | 573:ad23fe03a082 | 198 | |
mbed_official | 573:ad23fe03a082 | 199 | /** @addtogroup PWREx_Exported_Functions_Group1 |
mbed_official | 573:ad23fe03a082 | 200 | * @{ |
mbed_official | 573:ad23fe03a082 | 201 | */ |
mbed_official | 573:ad23fe03a082 | 202 | uint32_t HAL_PWREx_GetVoltageRange(void); |
mbed_official | 573:ad23fe03a082 | 203 | HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); |
mbed_official | 573:ad23fe03a082 | 204 | |
mbed_official | 573:ad23fe03a082 | 205 | void HAL_PWREx_EnableFlashPowerDown(void); |
mbed_official | 573:ad23fe03a082 | 206 | void HAL_PWREx_DisableFlashPowerDown(void); |
mbed_official | 573:ad23fe03a082 | 207 | HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); |
mbed_official | 573:ad23fe03a082 | 208 | HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); |
mbed_official | 573:ad23fe03a082 | 209 | |
mbed_official | 573:ad23fe03a082 | 210 | void HAL_PWREx_EnableMainRegulatorLowVoltage(void); |
mbed_official | 573:ad23fe03a082 | 211 | void HAL_PWREx_DisableMainRegulatorLowVoltage(void); |
mbed_official | 573:ad23fe03a082 | 212 | void HAL_PWREx_EnableLowRegulatorLowVoltage(void); |
mbed_official | 573:ad23fe03a082 | 213 | void HAL_PWREx_DisableLowRegulatorLowVoltage(void); |
mbed_official | 573:ad23fe03a082 | 214 | |
mbed_official | 573:ad23fe03a082 | 215 | HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); |
mbed_official | 573:ad23fe03a082 | 216 | HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); |
mbed_official | 573:ad23fe03a082 | 217 | HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); |
mbed_official | 573:ad23fe03a082 | 218 | |
mbed_official | 573:ad23fe03a082 | 219 | /** |
mbed_official | 573:ad23fe03a082 | 220 | * @} |
mbed_official | 573:ad23fe03a082 | 221 | */ |
mbed_official | 573:ad23fe03a082 | 222 | |
mbed_official | 573:ad23fe03a082 | 223 | /** |
mbed_official | 573:ad23fe03a082 | 224 | * @} |
mbed_official | 573:ad23fe03a082 | 225 | */ |
mbed_official | 573:ad23fe03a082 | 226 | /* Private types -------------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 227 | /* Private variables ---------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 228 | /* Private constants ---------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 229 | /* Private macros ------------------------------------------------------------*/ |
mbed_official | 573:ad23fe03a082 | 230 | /** @defgroup PWREx_Private_Macros PWREx Private Macros |
mbed_official | 573:ad23fe03a082 | 231 | * @{ |
mbed_official | 573:ad23fe03a082 | 232 | */ |
mbed_official | 573:ad23fe03a082 | 233 | |
mbed_official | 573:ad23fe03a082 | 234 | /** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters |
mbed_official | 573:ad23fe03a082 | 235 | * @{ |
mbed_official | 573:ad23fe03a082 | 236 | */ |
mbed_official | 573:ad23fe03a082 | 237 | #define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ |
mbed_official | 573:ad23fe03a082 | 238 | ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) |
mbed_official | 573:ad23fe03a082 | 239 | #define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \ |
mbed_official | 573:ad23fe03a082 | 240 | ((__PIN__) == PWR_WAKEUP_PIN2) || \ |
mbed_official | 573:ad23fe03a082 | 241 | ((__PIN__) == PWR_WAKEUP_PIN3) || \ |
mbed_official | 573:ad23fe03a082 | 242 | ((__PIN__) == PWR_WAKEUP_PIN4) || \ |
mbed_official | 573:ad23fe03a082 | 243 | ((__PIN__) == PWR_WAKEUP_PIN5) || \ |
mbed_official | 573:ad23fe03a082 | 244 | ((__PIN__) == PWR_WAKEUP_PIN6) || \ |
mbed_official | 573:ad23fe03a082 | 245 | ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 246 | ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 247 | ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 248 | ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 249 | ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 250 | ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \ |
mbed_official | 573:ad23fe03a082 | 251 | ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \ |
mbed_official | 573:ad23fe03a082 | 252 | ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \ |
mbed_official | 573:ad23fe03a082 | 253 | ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \ |
mbed_official | 573:ad23fe03a082 | 254 | ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \ |
mbed_official | 573:ad23fe03a082 | 255 | ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \ |
mbed_official | 573:ad23fe03a082 | 256 | ((__PIN__) == PWR_WAKEUP_PIN6_LOW)) |
mbed_official | 573:ad23fe03a082 | 257 | /** |
mbed_official | 573:ad23fe03a082 | 258 | * @} |
mbed_official | 573:ad23fe03a082 | 259 | */ |
mbed_official | 573:ad23fe03a082 | 260 | |
mbed_official | 573:ad23fe03a082 | 261 | /** |
mbed_official | 573:ad23fe03a082 | 262 | * @} |
mbed_official | 573:ad23fe03a082 | 263 | */ |
mbed_official | 573:ad23fe03a082 | 264 | |
mbed_official | 573:ad23fe03a082 | 265 | /** |
mbed_official | 573:ad23fe03a082 | 266 | * @} |
mbed_official | 573:ad23fe03a082 | 267 | */ |
mbed_official | 573:ad23fe03a082 | 268 | |
mbed_official | 573:ad23fe03a082 | 269 | /** |
mbed_official | 573:ad23fe03a082 | 270 | * @} |
mbed_official | 573:ad23fe03a082 | 271 | */ |
mbed_official | 573:ad23fe03a082 | 272 | |
mbed_official | 573:ad23fe03a082 | 273 | #ifdef __cplusplus |
mbed_official | 573:ad23fe03a082 | 274 | } |
mbed_official | 573:ad23fe03a082 | 275 | #endif |
mbed_official | 573:ad23fe03a082 | 276 | |
mbed_official | 573:ad23fe03a082 | 277 | |
mbed_official | 573:ad23fe03a082 | 278 | #endif /* __STM32F7xx_HAL_PWR_EX_H */ |
mbed_official | 573:ad23fe03a082 | 279 | |
mbed_official | 573:ad23fe03a082 | 280 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |