Fork for fixes
Embed:
(wiki syntax)
Show/hide line numbers
uip.h
Go to the documentation of this file.
00001 00002 /** 00003 * \addtogroup uip 00004 * @{ 00005 */ 00006 00007 /** 00008 * \file 00009 * Header file for the UIP TCP/IP stack. 00010 * \author Adam Dunkels <adam@dunkels.com> 00011 * 00012 * The UIP TCP/IP stack header file contains definitions for a number 00013 * of C macros that are used by UIP programs as well as internal UIP 00014 * structures, TCP/IP header structures and function declarations. 00015 * 00016 */ 00017 /* 00018 * Copyright (c) 2001-2003, Adam Dunkels. 00019 * All rights reserved. 00020 * 00021 * Redistribution and use in source and binary forms, with or without 00022 * modification, are permitted provided that the following conditions 00023 * are met: 00024 * 1. Redistributions of source code must retain the above copyright 00025 * notice, this list of conditions and the following disclaimer. 00026 * 2. Redistributions in binary form must reproduce the above copyright 00027 * notice, this list of conditions and the following disclaimer in the 00028 * documentation and/or other materials provided with the distribution. 00029 * 3. The name of the author may not be used to endorse or promote 00030 * products derived from this software without specific prior 00031 * written permission. 00032 * 00033 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS 00034 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 00035 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 00036 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 00037 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 00038 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 00039 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 00040 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 00041 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 00042 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 00043 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 00044 * 00045 * This file is part of the UIP TCP/IP stack. 00046 * 00047 * $Id: uip.h,v 1.40 2006/06/08 07:12:07 adam Exp $ 00048 * 00049 */ 00050 #ifndef __UIP_H__ 00051 #define __UIP_H__ 00052 00053 #include "uipopt.h" 00054 00055 /** 00056 * Repressentation of an IP address. 00057 * 00058 */ 00059 00060 typedef u16_t uip_ip4addr_t[2]; 00061 typedef u16_t uip_ip6addr_t[8]; 00062 #if UIP_CONF_IPV6 00063 typedef uip_ip6addr_t uip_ipaddr_t; 00064 #else /* UIP_CONF_IPV6 */ 00065 00066 typedef uip_ip4addr_t uip_ipaddr_t; 00067 #endif /* UIP_CONF_IPV6 */ 00068 00069 /*---------------------------------------------------------------------------*/ 00070 00071 /* First, the functions that should be called from the 00072 * system. Initialization, the periodic timer and incoming packets are 00073 * handled by the following three functions. 00074 */ 00075 /** 00076 * \defgroup uipconffunc UIP configuration functions 00077 * @{ 00078 * 00079 * The UIP configuration functions are used for setting run-time 00080 * parameters in UIP such as IP addresses. 00081 */ 00082 00083 /** 00084 * Set the IP address of this host. 00085 * 00086 * The IP address is represented as a 4-byte array where the first 00087 * octet of the IP address is put in the first member of the 4-byte 00088 * array. 00089 * 00090 * Example: 00091 \code 00092 00093 uip_ipaddr_t addr; 00094 00095 uip_ipaddr(&addr, 192,168,1,2); 00096 uip_sethostaddr(&addr); 00097 00098 \endcode 00099 * \param addr A pointer to an IP address of type uip_ipaddr_t; 00100 * 00101 * \sa uip_ipaddr() 00102 * 00103 * \hideinitializer 00104 */ 00105 #define uip_sethostaddr(addr) uip_ipaddr_copy(uip_hostaddr, (addr)) 00106 00107 /** 00108 * Get the IP address of this host. 00109 * 00110 * The IP address is represented as a 4-byte array where the first 00111 * octet of the IP address is put in the first member of the 4-byte 00112 * array. 00113 * 00114 * Example: 00115 \code 00116 uip_ipaddr_t hostaddr; 00117 00118 uip_gethostaddr(&hostaddr); 00119 \endcode 00120 * \param addr A pointer to a uip_ipaddr_t variable that will be 00121 * filled in with the currently configured IP address. 00122 * 00123 * \hideinitializer 00124 */ 00125 00126 #define uip_gethostaddr(addr) uip_ipaddr_copy((addr), uip_hostaddr) 00127 00128 /** 00129 * Set the default router's IP address. 00130 * 00131 * \param addr A pointer to a uip_ipaddr_t variable containing the IP 00132 * address of the default router. 00133 * 00134 * \sa uip_ipaddr() 00135 * 00136 * \hideinitializer 00137 */ 00138 00139 #define uip_setdraddr(addr) uip_ipaddr_copy(uip_draddr, (addr)) 00140 00141 /** 00142 * Set the netmask. 00143 * 00144 * \param addr A pointer to a uip_ipaddr_t variable containing the IP 00145 * address of the netmask. 00146 * 00147 * \sa uip_ipaddr() 00148 * 00149 * \hideinitializer 00150 */ 00151 00152 #define uip_setnetmask(addr) uip_ipaddr_copy(uip_netmask, (addr)) 00153 00154 /** 00155 * Get the default router's IP address. 00156 * 00157 * \param addr A pointer to a uip_ipaddr_t variable that will be 00158 * filled in with the IP address of the default router. 00159 * 00160 * \hideinitializer 00161 */ 00162 00163 #define uip_getdraddr(addr) uip_ipaddr_copy((addr), uip_draddr) 00164 00165 /** 00166 * Get the netmask. 00167 * 00168 * \param addr A pointer to a uip_ipaddr_t variable that will be 00169 * filled in with the value of the netmask. 00170 * 00171 * \hideinitializer 00172 */ 00173 00174 #define uip_getnetmask(addr) uip_ipaddr_copy((addr), uip_netmask) 00175 00176 /** @} */ 00177 00178 /** 00179 * \defgroup uipinit UIP initialization functions 00180 * @{ 00181 * 00182 * The UIP initialization functions are used for booting UIP. 00183 */ 00184 /** 00185 * UIP initialization function. 00186 * 00187 * This function should be called at boot up to initilize the UIP 00188 * TCP/IP stack. 00189 */ 00190 void uip_init(void); 00191 00192 /** 00193 * UIP initialization function. 00194 * 00195 * This function may be used at boot time to set the initial ip_id. 00196 */ 00197 void uip_setipid(u16_t id); 00198 00199 /** @} */ 00200 00201 /** 00202 * \defgroup uipdevfunc UIP device driver functions 00203 * @{ 00204 * 00205 * These functions are used by a network device driver for interacting 00206 * with UIP. 00207 */ 00208 00209 /** 00210 * Process an incoming packet. 00211 * 00212 * This function should be called when the device driver has received 00213 * a packet from the network. The packet from the device driver must 00214 * be present in the uip_buf buffer, and the length of the packet 00215 * should be placed in the uip_len variable. 00216 * 00217 * When the function returns, there may be an outbound packet placed 00218 * in the uip_buf packet buffer. If so, the uip_len variable is set to 00219 * the length of the packet. If no packet is to be sent out, the 00220 * uip_len variable is set to 0. 00221 * 00222 * The usual way of calling the function is presented by the source 00223 * code below. 00224 \code 00225 uip_len = devicedriver_poll(); 00226 if(uip_len > 0) { 00227 uip_input(); 00228 if(uip_len > 0) { 00229 devicedriver_send(); 00230 } 00231 } 00232 \endcode 00233 * 00234 * \note If you are writing a UIP device driver that needs ARP 00235 * (Address Resolution Protocol), e.g., when running UIP over 00236 * Ethernet, you will need to call the UIP ARP code before calling 00237 * this function: 00238 \code 00239 #define BUF ((struct uip_eth_hdr *)&uip_buf[0]) 00240 uip_len = ethernet_devicedrver_poll(); 00241 if(uip_len > 0) { 00242 if(BUF->type == HTONS(UIP_ETHTYPE_IP)) { 00243 uip_arp_ipin(); 00244 uip_input(); 00245 if(uip_len > 0) { 00246 uip_arp_out(); 00247 ethernet_devicedriver_send(); 00248 } 00249 } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) { 00250 uip_arp_arpin(); 00251 if(uip_len > 0) { 00252 ethernet_devicedriver_send(); 00253 } 00254 } 00255 \endcode 00256 * 00257 * \hideinitializer 00258 */ 00259 #define uip_input() uip_process(UIP_DATA) 00260 00261 /** 00262 * Periodic processing for a connection identified by its number. 00263 * 00264 * This function does the necessary periodic processing (timers, 00265 * polling) for a UIP TCP conneciton, and should be called when the 00266 * periodic UIP timer goes off. It should be called for every 00267 * connection, regardless of whether they are open of closed. 00268 * 00269 * When the function returns, it may have an outbound packet waiting 00270 * for service in the UIP packet buffer, and if so the uip_len 00271 * variable is set to a value larger than zero. The device driver 00272 * should be called to send out the packet. 00273 * 00274 * The ususal way of calling the function is through a for() loop like 00275 * this: 00276 \code 00277 for(i = 0; i < UIP_CONNS; ++i) { 00278 uip_periodic(i); 00279 if(uip_len > 0) { 00280 devicedriver_send(); 00281 } 00282 } 00283 \endcode 00284 * 00285 * \note If you are writing a UIP device driver that needs ARP 00286 * (Address Resolution Protocol), e.g., when running UIP over 00287 * Ethernet, you will need to call the uip_arp_out() function before 00288 * calling the device driver: 00289 \code 00290 for(i = 0; i < UIP_CONNS; ++i) { 00291 uip_periodic(i); 00292 if(uip_len > 0) { 00293 uip_arp_out(); 00294 ethernet_devicedriver_send(); 00295 } 00296 } 00297 \endcode 00298 * 00299 * \param conn The number of the connection which is to be periodically polled. 00300 * 00301 * \hideinitializer 00302 */ 00303 00304 #define uip_periodic(conn) \ 00305 do { \ 00306 uip_conn = &uip_conns[conn]; \ 00307 uip_process(UIP_TIMER); \ 00308 } while (0) 00309 00310 /** 00311 * 00312 * 00313 */ 00314 00315 #define uip_conn_active(conn) (uip_conns[conn].tcpstateflags != UIP_CLOSED) 00316 00317 /** 00318 * Perform periodic processing for a connection identified by a pointer 00319 * to its structure. 00320 * 00321 * Same as uip_periodic() but takes a pointer to the actual uip_conn 00322 * struct instead of an integer as its argument. This function can be 00323 * used to force periodic processing of a specific connection. 00324 * 00325 * \param conn A pointer to the uip_conn struct for the connection to 00326 * be processed. 00327 * 00328 * \hideinitializer 00329 */ 00330 00331 #define uip_periodic_conn(conn) \ 00332 do { \ 00333 uip_conn = conn; \ 00334 uip_process(UIP_TIMER); \ 00335 } while (0) 00336 00337 /** 00338 * Reuqest that a particular connection should be polled. 00339 * 00340 * Similar to uip_periodic_conn() but does not perform any timer 00341 * processing. The application is polled for new data. 00342 * 00343 * \param conn A pointer to the uip_conn struct for the connection to 00344 * be processed. 00345 * 00346 * \hideinitializer 00347 */ 00348 00349 #define uip_poll_conn(conn) \ 00350 do { \ 00351 uip_conn = conn; \ 00352 uip_process(UIP_POLL_REQUEST); \ 00353 } while (0) 00354 #if UIP_UDP 00355 00356 /** 00357 * Periodic processing for a UDP connection identified by its number. 00358 * 00359 * This function is essentially the same as uip_periodic(), but for 00360 * UDP connections. It is called in a similar fashion as the 00361 * uip_periodic() function: 00362 \code 00363 for(i = 0; i < UIP_UDP_CONNS; i++) { 00364 uip_udp_periodic(i); 00365 if(uip_len > 0) { 00366 devicedriver_send(); 00367 } 00368 } 00369 \endcode 00370 * 00371 * \note As for the uip_periodic() function, special care has to be 00372 * taken when using UIP together with ARP and Ethernet: 00373 \code 00374 for(i = 0; i < UIP_UDP_CONNS; i++) { 00375 uip_udp_periodic(i); 00376 if(uip_len > 0) { 00377 uip_arp_out(); 00378 ethernet_devicedriver_send(); 00379 } 00380 } 00381 \endcode 00382 * 00383 * \param conn The number of the UDP connection to be processed. 00384 * 00385 * \hideinitializer 00386 */ 00387 00388 #define uip_udp_periodic(conn) \ 00389 do { \ 00390 uip_udp_conn = &uip_udp_conns[conn]; \ 00391 uip_process(UIP_UDP_TIMER); \ 00392 } while (0) 00393 00394 /** 00395 * Periodic processing for a UDP connection identified by a pointer to 00396 * its structure. 00397 * 00398 * Same as uip_udp_periodic() but takes a pointer to the actual 00399 * uip_conn struct instead of an integer as its argument. This 00400 * function can be used to force periodic processing of a specific 00401 * connection. 00402 * 00403 * \param conn A pointer to the uip_udp_conn struct for the connection 00404 * to be processed. 00405 * 00406 * \hideinitializer 00407 */ 00408 00409 #define uip_udp_periodic_conn(conn) \ 00410 do { \ 00411 uip_udp_conn = conn; \ 00412 uip_process(UIP_UDP_TIMER); \ 00413 } while (0) 00414 #endif /* UIP_UDP */ 00415 00416 /** 00417 * The UIP packet buffer. 00418 * 00419 * The uip_buf array is used to hold incoming and outgoing 00420 * packets. The device driver should place incoming data into this 00421 * buffer. When sending data, the device driver should read the link 00422 * level headers and the TCP/IP headers from this buffer. The size of 00423 * the link level headers is configured by the UIP_LLH_LEN define. 00424 * 00425 * \note The application data need not be placed in this buffer, so 00426 * the device driver must read it from the place pointed to by the 00427 * uip_appdata pointer as illustrated by the following example: 00428 \code 00429 void 00430 devicedriver_send(void) 00431 { 00432 hwsend(&uip_buf[0], UIP_LLH_LEN); 00433 if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) { 00434 hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN); 00435 } else { 00436 hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN); 00437 hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN); 00438 } 00439 } 00440 \endcode 00441 */ 00442 extern u8_t uip_buf[UIP_BUFSIZE + 2]; 00443 00444 /** @} */ 00445 00446 /*---------------------------------------------------------------------------*/ 00447 /* Functions that are used by the UIP application program. Opening and 00448 * closing connections, sending and receiving data, etc. is all 00449 * handled by the functions below. 00450 */ 00451 /** 00452 * \defgroup uipappfunc UIP application functions 00453 * @{ 00454 * 00455 * Functions used by an application running of top of UIP. 00456 */ 00457 /** 00458 * Start listening to the specified port. 00459 * 00460 * \note Since this function expects the port number in network byte 00461 * order, a conversion using HTONS() or htons() is necessary. 00462 * 00463 \code 00464 uip_listen(HTONS(80)); 00465 \endcode 00466 * 00467 * \param port A 16-bit port number in network byte order. 00468 */ 00469 void uip_listen(u16_t port); 00470 00471 /** 00472 * Stop listening to the specified port. 00473 * 00474 * \note Since this function expects the port number in network byte 00475 * order, a conversion using HTONS() or htons() is necessary. 00476 * 00477 \code 00478 uip_unlisten(HTONS(80)); 00479 \endcode 00480 * 00481 * \param port A 16-bit port number in network byte order. 00482 */ 00483 void uip_unlisten(u16_t port); 00484 00485 /** 00486 * Connect to a remote host using TCP. 00487 * 00488 * This function is used to start a new connection to the specified 00489 * port on the specied host. It allocates a new connection identifier, 00490 * sets the connection to the SYN_SENT state and sets the 00491 * retransmission timer to 0. This will cause a TCP SYN segment to be 00492 * sent out the next time this connection is periodically processed, 00493 * which usually is done within 0.5 seconds after the call to 00494 * uip_connect(). 00495 * 00496 * \note This function is avaliable only if support for active open 00497 * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h. 00498 * 00499 * \note Since this function requires the port number to be in network 00500 * byte order, a conversion using HTONS() or htons() is necessary. 00501 * 00502 \code 00503 uip_ipaddr_t ipaddr; 00504 00505 uip_ipaddr(&ipaddr, 192,168,1,2); 00506 uip_connect(&ipaddr, HTONS(80)); 00507 \endcode 00508 * 00509 * \param ripaddr The IP address of the remote hot. 00510 * 00511 * \param port A 16-bit port number in network byte order. 00512 * 00513 * \return A pointer to the UIP connection identifier for the new connection, 00514 * or NULL if no connection could be allocated. 00515 * 00516 */ 00517 struct uip_conn* uip_connect(uip_ipaddr_t* ripaddr, u16_t port); 00518 00519 /** 00520 * \internal 00521 * 00522 * Check if a connection has outstanding (i.e., unacknowledged) data. 00523 * 00524 * \param conn A pointer to the uip_conn structure for the connection. 00525 * 00526 * \hideinitializer 00527 */ 00528 00529 #define uip_outstanding(conn) ((conn)->len) 00530 00531 /** 00532 * Send data on the current connection. 00533 * 00534 * This function is used to send out a single segment of TCP 00535 * data. Only applications that have been invoked by UIP for event 00536 * processing can send data. 00537 * 00538 * The amount of data that actually is sent out after a call to this 00539 * funcion is determined by the maximum amount of data TCP allows. UIP 00540 * will automatically crop the data so that only the appropriate 00541 * amount of data is sent. The function uip_mss() can be used to query 00542 * UIP for the amount of data that actually will be sent. 00543 * 00544 * \note This function does not guarantee that the sent data will 00545 * arrive at the destination. If the data is lost in the network, the 00546 * application will be invoked with the uip_rexmit() event being 00547 * set. The application will then have to resend the data using this 00548 * function. 00549 * 00550 * \param data A pointer to the data which is to be sent. 00551 * 00552 * \param len The maximum amount of data bytes to be sent. 00553 * 00554 * \hideinitializer 00555 */ 00556 void uip_send(const void* data, int len); 00557 00558 /** 00559 * The length of any incoming data that is currently avaliable (if avaliable) 00560 * in the uip_appdata buffer. 00561 * 00562 * The test function uip_data() must first be used to check if there 00563 * is any data available at all. 00564 * 00565 * \hideinitializer 00566 */ 00567 00568 /*void uip_datalen(void);*/ 00569 #define uip_datalen() uip_len 00570 00571 /** 00572 * The length of any out-of-band data (urgent data) that has arrived 00573 * on the connection. 00574 * 00575 * \note The configuration parameter UIP_URGDATA must be set for this 00576 * function to be enabled. 00577 * 00578 * \hideinitializer 00579 */ 00580 00581 #define uip_urgdatalen() uip_urglen 00582 00583 /** 00584 * Close the current connection. 00585 * 00586 * This function will close the current connection in a nice way. 00587 * 00588 * \hideinitializer 00589 */ 00590 00591 #define uip_close() (uip_flags = UIP_CLOSE) 00592 00593 /** 00594 * Abort the current connection. 00595 * 00596 * This function will abort (reset) the current connection, and is 00597 * usually used when an error has occured that prevents using the 00598 * uip_close() function. 00599 * 00600 * \hideinitializer 00601 */ 00602 00603 #define uip_abort() (uip_flags = UIP_ABORT) 00604 00605 /** 00606 * Tell the sending host to stop sending data. 00607 * 00608 * This function will close our receiver's window so that we stop 00609 * receiving data for the current connection. 00610 * 00611 * \hideinitializer 00612 */ 00613 00614 #define uip_stop() (uip_conn->tcpstateflags |= UIP_STOPPED) 00615 00616 /** 00617 * Find out if the current connection has been previously stopped with 00618 * uip_stop(). 00619 * 00620 * \hideinitializer 00621 */ 00622 00623 #define uip_stopped(conn) ((conn)->tcpstateflags & UIP_STOPPED) 00624 00625 /** 00626 * Restart the current connection, if is has previously been stopped 00627 * with uip_stop(). 00628 * 00629 * This function will open the receiver's window again so that we 00630 * start receiving data for the current connection. 00631 * 00632 * \hideinitializer 00633 */ 00634 00635 #define uip_restart() \ 00636 do { \ 00637 uip_flags |= UIP_NEWDATA; \ 00638 uip_conn->tcpstateflags &= ~UIP_STOPPED; \ 00639 } while (0) 00640 00641 /* UIP tests that can be made to determine in what state the current 00642 connection is, and what the application function should do. */ 00643 00644 /** 00645 * Is the current connection a UDP connection? 00646 * 00647 * This function checks whether the current connection is a UDP connection. 00648 * 00649 * \hideinitializer 00650 * 00651 */ 00652 #define uip_udpconnection() (uip_conn == NULL) 00653 00654 /** 00655 * Is new incoming data available? 00656 * 00657 * Will reduce to non-zero if there is new data for the application 00658 * present at the uip_appdata pointer. The size of the data is 00659 * avaliable through the uip_len variable. 00660 * 00661 * \hideinitializer 00662 */ 00663 00664 #define uip_newdata() (uip_flags & UIP_NEWDATA) 00665 00666 /** 00667 * Has previously sent data been acknowledged? 00668 * 00669 * Will reduce to non-zero if the previously sent data has been 00670 * acknowledged by the remote host. This means that the application 00671 * can send new data. 00672 * 00673 * \hideinitializer 00674 */ 00675 00676 #define uip_acked() (uip_flags & UIP_ACKDATA) 00677 00678 /** 00679 * Has the connection just been connected? 00680 * 00681 * Reduces to non-zero if the current connection has been connected to 00682 * a remote host. This will happen both if the connection has been 00683 * actively opened (with uip_connect()) or passively opened (with 00684 * uip_listen()). 00685 * 00686 * \hideinitializer 00687 */ 00688 00689 #define uip_connected() (uip_flags & UIP_CONNECTED) 00690 00691 /** 00692 * Has the connection been closed by the other end? 00693 * 00694 * Is non-zero if the connection has been closed by the remote 00695 * host. The application may then do the necessary clean-ups. 00696 * 00697 * \hideinitializer 00698 */ 00699 00700 #define uip_closed() (uip_flags & UIP_CLOSE) 00701 00702 /** 00703 * Has the connection been aborted by the other end? 00704 * 00705 * Non-zero if the current connection has been aborted (reset) by the 00706 * remote host. 00707 * 00708 * \hideinitializer 00709 */ 00710 00711 #define uip_aborted() (uip_flags & UIP_ABORT) 00712 00713 /** 00714 * Has the connection timed out? 00715 * 00716 * Non-zero if the current connection has been aborted due to too many 00717 * retransmissions. 00718 * 00719 * \hideinitializer 00720 */ 00721 00722 #define uip_timedout() (uip_flags & UIP_TIMEDOUT) 00723 00724 /** 00725 * Do we need to retransmit previously data? 00726 * 00727 * Reduces to non-zero if the previously sent data has been lost in 00728 * the network, and the application should retransmit it. The 00729 * application should send the exact same data as it did the last 00730 * time, using the uip_send() function. 00731 * 00732 * \hideinitializer 00733 */ 00734 00735 #define uip_rexmit() (uip_flags & UIP_REXMIT) 00736 00737 /** 00738 * Is the connection being polled by UIP? 00739 * 00740 * Is non-zero if the reason the application is invoked is that the 00741 * current connection has been idle for a while and should be 00742 * polled. 00743 * 00744 * The polling event can be used for sending data without having to 00745 * wait for the remote host to send data. 00746 * 00747 * \hideinitializer 00748 */ 00749 00750 #define uip_poll() (uip_flags & UIP_POLL) 00751 00752 /** 00753 * Get the initial maxium segment size (MSS) of the current 00754 * connection. 00755 * 00756 * \hideinitializer 00757 */ 00758 00759 #define uip_initialmss() (uip_conn->initialmss) 00760 00761 /** 00762 * Get the current maxium segment size that can be sent on the current 00763 * connection. 00764 * 00765 * The current maxiumum segment size that can be sent on the 00766 * connection is computed from the receiver's window and the MSS of 00767 * the connection (which also is available by calling 00768 * uip_initialmss()). 00769 * 00770 * \hideinitializer 00771 */ 00772 00773 #define uip_mss() (uip_conn->mss) 00774 /** 00775 * Set up a new UDP connection. 00776 * 00777 * This function sets up a new UDP connection. The function will 00778 * automatically allocate an unused local port for the new 00779 * connection. However, another port can be chosen by using the 00780 * uip_udp_bind() call, after the uip_udp_new() function has been 00781 * called. 00782 * 00783 * Example: 00784 \code 00785 uip_ipaddr_t addr; 00786 struct uip_udp_conn *c; 00787 00788 uip_ipaddr(&addr, 192,168,2,1); 00789 c = uip_udp_new(&addr, HTONS(12345)); 00790 if(c != NULL) { 00791 uip_udp_bind(c, HTONS(12344)); 00792 } 00793 \endcode 00794 * \param ripaddr The IP address of the remote host. 00795 * 00796 * \param rport The remote port number in network byte order. 00797 * 00798 * \return The uip_udp_conn structure for the new connection or NULL 00799 * if no connection could be allocated. 00800 */ 00801 struct uip_udp_conn* uip_udp_new(uip_ipaddr_t* ripaddr, u16_t rport); 00802 00803 /** 00804 * Removed a UDP connection. 00805 * 00806 * \param conn A pointer to the uip_udp_conn structure for the connection. 00807 * 00808 * \hideinitializer 00809 */ 00810 00811 #define uip_udp_remove(conn) (conn)->lport = 0 00812 00813 /** 00814 * Bind a UDP connection to a local port. 00815 * 00816 * \param conn A pointer to the uip_udp_conn structure for the 00817 * connection. 00818 * 00819 * \param port The local port number, in network byte order. 00820 * 00821 * \hideinitializer 00822 */ 00823 00824 #define uip_udp_bind(conn, port) (conn)->lport = port 00825 00826 /** 00827 * Send a UDP datagram of length len on the current connection. 00828 * 00829 * This function can only be called in response to a UDP event (poll 00830 * or newdata). The data must be present in the uip_buf buffer, at the 00831 * place pointed to by the uip_appdata pointer. 00832 * 00833 * \param len The length of the data in the uip_buf buffer. 00834 * 00835 * \hideinitializer 00836 */ 00837 00838 #define uip_udp_send(len) uip_send((char*)uip_appdata, len) 00839 00840 /** @} */ 00841 00842 /* UIP convenience and converting functions. */ 00843 /** 00844 * \defgroup uipconvfunc UIP conversion functions 00845 * @{ 00846 * 00847 * These functions can be used for converting between different data 00848 * formats used by UIP. 00849 */ 00850 00851 /** 00852 * Construct an IP address from four bytes. 00853 * 00854 * This function constructs an IP address of the type that UIP handles 00855 * internally from four bytes. The function is handy for specifying IP 00856 * addresses to use with e.g. the uip_connect() function. 00857 * 00858 * Example: 00859 \code 00860 uip_ipaddr_t ipaddr; 00861 struct uip_conn *c; 00862 00863 uip_ipaddr(&ipaddr, 192,168,1,2); 00864 c = uip_connect(&ipaddr, HTONS(80)); 00865 \endcode 00866 * 00867 * \param addr A pointer to a uip_ipaddr_t variable that will be 00868 * filled in with the IP address. 00869 * 00870 * \param addr0 The first octet of the IP address. 00871 * \param addr1 The second octet of the IP address. 00872 * \param addr2 The third octet of the IP address. 00873 * \param addr3 The forth octet of the IP address. 00874 * 00875 * \hideinitializer 00876 */ 00877 #define uip_ipaddr(addr, addr0, addr1, addr2, addr3) \ 00878 do { \ 00879 ((u16_t *) (addr))[0] = HTONS(((addr0) << 8) | (addr1)); \ 00880 ((u16_t *) (addr))[1] = HTONS(((addr2) << 8) | (addr3)); \ 00881 } while (0) 00882 00883 /** 00884 * Construct an IPv6 address from eight 16-bit words. 00885 * 00886 * This function constructs an IPv6 address. 00887 * 00888 * \hideinitializer 00889 */ 00890 00891 #define uip_ip6addr(addr, addr0, addr1, addr2, addr3, addr4, addr5, addr6, addr7) \ 00892 do { \ 00893 ((u16_t *) (addr))[0] = HTONS((addr0)); \ 00894 ((u16_t *) (addr))[1] = HTONS((addr1)); \ 00895 ((u16_t *) (addr))[2] = HTONS((addr2)); \ 00896 ((u16_t *) (addr))[3] = HTONS((addr3)); \ 00897 ((u16_t *) (addr))[4] = HTONS((addr4)); \ 00898 ((u16_t *) (addr))[5] = HTONS((addr5)); \ 00899 ((u16_t *) (addr))[6] = HTONS((addr6)); \ 00900 ((u16_t *) (addr))[7] = HTONS((addr7)); \ 00901 } while (0) /** 00902 * Copy an IP address to another IP address. 00903 * 00904 * Copies an IP address from one place to another. 00905 * 00906 * Example: 00907 \code 00908 uip_ipaddr_t ipaddr1, ipaddr2; 00909 00910 uip_ipaddr(&ipaddr1, 192,16,1,2); 00911 uip_ipaddr_copy(&ipaddr2, &ipaddr1); 00912 \endcode 00913 * 00914 * \param dest The destination for the copy. 00915 * \param src The source from where to copy. 00916 * 00917 * \hideinitializer 00918 */ 00919 00920 #if !UIP_CONF_IPV6 00921 #define uip_ipaddr_copy(dest, src) \ 00922 do { \ 00923 ((u16_t*)dest)[0] = ((u16_t*)src)[0]; \ 00924 ((u16_t*)dest)[1] = ((u16_t*)src)[1]; \ 00925 } while (0) 00926 #else /* !UIP_CONF_IPV6 */ 00927 00928 #define uip_ipaddr_copy(dest, src) memcpy(dest, src, sizeof(uip_ip6addr_t)) 00929 #endif /* !UIP_CONF_IPV6 */ 00930 00931 /** 00932 * Compare two IP addresses 00933 * 00934 * Compares two IP addresses. 00935 * 00936 * Example: 00937 \code 00938 uip_ipaddr_t ipaddr1, ipaddr2; 00939 00940 uip_ipaddr(&ipaddr1, 192,16,1,2); 00941 if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) { 00942 printf("They are the same"); 00943 } 00944 \endcode 00945 * 00946 * \param addr1 The first IP address. 00947 * \param addr2 The second IP address. 00948 * 00949 * \hideinitializer 00950 */ 00951 00952 #if !UIP_CONF_IPV6 00953 #define uip_ipaddr_cmp(addr1, addr2) \ 00954 (((u16_t*)addr1)[0] == ((u16_t*)addr2)[0] && ((u16_t*)addr1)[1] == ((u16_t*)addr2)[1]) 00955 #else /* !UIP_CONF_IPV6 */ 00956 00957 #define uip_ipaddr_cmp(addr1, addr2) (memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0) 00958 #endif /* !UIP_CONF_IPV6 */ 00959 00960 /** 00961 * Compare two IP addresses with netmasks 00962 * 00963 * Compares two IP addresses with netmasks. The masks are used to mask 00964 * out the bits that are to be compared. 00965 * 00966 * Example: 00967 \code 00968 uip_ipaddr_t ipaddr1, ipaddr2, mask; 00969 00970 uip_ipaddr(&mask, 255,255,255,0); 00971 uip_ipaddr(&ipaddr1, 192,16,1,2); 00972 uip_ipaddr(&ipaddr2, 192,16,1,3); 00973 if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) { 00974 printf("They are the same"); 00975 } 00976 \endcode 00977 * 00978 * \param addr1 The first IP address. 00979 * \param addr2 The second IP address. 00980 * \param mask The netmask. 00981 * 00982 * \hideinitializer 00983 */ 00984 00985 #define uip_ipaddr_maskcmp(addr1, addr2, mask) \ 00986 ( \ 00987 ((((u16_t*)addr1)[0] & ((u16_t*)mask)[0]) == (((u16_t*)addr2)[0] & ((u16_t*)mask)[0])) \ 00988 && ((((u16_t*)addr1)[1] & ((u16_t*)mask)[1]) == (((u16_t*)addr2)[1] & ((u16_t*)mask)[1])) \ 00989 ) 00990 00991 /** 00992 * Mask out the network part of an IP address. 00993 * 00994 * Masks out the network part of an IP address, given the address and 00995 * the netmask. 00996 * 00997 * Example: 00998 \code 00999 uip_ipaddr_t ipaddr1, ipaddr2, netmask; 01000 01001 uip_ipaddr(&ipaddr1, 192,16,1,2); 01002 uip_ipaddr(&netmask, 255,255,255,0); 01003 uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask); 01004 \endcode 01005 * 01006 * In the example above, the variable "ipaddr2" will contain the IP 01007 * address 192.168.1.0. 01008 * 01009 * \param dest Where the result is to be placed. 01010 * \param src The IP address. 01011 * \param mask The netmask. 01012 * 01013 * \hideinitializer 01014 */ 01015 01016 #define uip_ipaddr_mask(dest, src, mask) \ 01017 do { \ 01018 ((u16_t*)dest)[0] = ((u16_t*)src)[0] & ((u16_t*)mask)[0]; \ 01019 ((u16_t*)dest)[1] = ((u16_t*)src)[1] & ((u16_t*)mask)[1]; \ 01020 } while (0) 01021 01022 /** 01023 * Pick the first octet of an IP address. 01024 * 01025 * Picks out the first octet of an IP address. 01026 * 01027 * Example: 01028 \code 01029 uip_ipaddr_t ipaddr; 01030 u8_t octet; 01031 01032 uip_ipaddr(&ipaddr, 1,2,3,4); 01033 octet = uip_ipaddr1(&ipaddr); 01034 \endcode 01035 * 01036 * In the example above, the variable "octet" will contain the value 1. 01037 * 01038 * \hideinitializer 01039 */ 01040 01041 #define uip_ipaddr1(addr) (htons(((u16_t *) (addr))[0]) >> 8) 01042 01043 /** 01044 * Pick the second octet of an IP address. 01045 * 01046 * Picks out the second octet of an IP address. 01047 * 01048 * Example: 01049 \code 01050 uip_ipaddr_t ipaddr; 01051 u8_t octet; 01052 01053 uip_ipaddr(&ipaddr, 1,2,3,4); 01054 octet = uip_ipaddr2(&ipaddr); 01055 \endcode 01056 * 01057 * In the example above, the variable "octet" will contain the value 2. 01058 * 01059 * \hideinitializer 01060 */ 01061 01062 #define uip_ipaddr2(addr) (htons(((u16_t *) (addr))[0]) & 0xff) 01063 01064 /** 01065 * Pick the third octet of an IP address. 01066 * 01067 * Picks out the third octet of an IP address. 01068 * 01069 * Example: 01070 \code 01071 uip_ipaddr_t ipaddr; 01072 u8_t octet; 01073 01074 uip_ipaddr(&ipaddr, 1,2,3,4); 01075 octet = uip_ipaddr3(&ipaddr); 01076 \endcode 01077 * 01078 * In the example above, the variable "octet" will contain the value 3. 01079 * 01080 * \hideinitializer 01081 */ 01082 01083 #define uip_ipaddr3(addr) (htons(((u16_t *) (addr))[1]) >> 8) 01084 01085 /** 01086 * Pick the fourth octet of an IP address. 01087 * 01088 * Picks out the fourth octet of an IP address. 01089 * 01090 * Example: 01091 \code 01092 uip_ipaddr_t ipaddr; 01093 u8_t octet; 01094 01095 uip_ipaddr(&ipaddr, 1,2,3,4); 01096 octet = uip_ipaddr4(&ipaddr); 01097 \endcode 01098 * 01099 * In the example above, the variable "octet" will contain the value 4. 01100 * 01101 * \hideinitializer 01102 */ 01103 01104 #define uip_ipaddr4(addr) (htons(((u16_t *) (addr))[1]) & 0xff) 01105 /** 01106 * Convert 16-bit quantity from host byte order to network byte order. 01107 * 01108 * This macro is primarily used for converting constants from host 01109 * byte order to network byte order. For converting variables to 01110 * network byte order, use the htons() function instead. 01111 * 01112 * \hideinitializer 01113 */ 01114 01115 #ifndef HTONS 01116 #if UIP_BYTE_ORDER == UIP_BIG_ENDIAN 01117 #define HTONS(n) (n) 01118 #else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ 01119 01120 #define HTONS(n) (u16_t) ((((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8)) 01121 #endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ 01122 01123 #else 01124 #error "HTONS already defined!" 01125 #endif /* HTONS */ 01126 01127 /** 01128 * Convert 16-bit quantity from host byte order to network byte order. 01129 * 01130 * This function is primarily used for converting variables from host 01131 * byte order to network byte order. For converting constants to 01132 * network byte order, use the HTONS() macro instead. 01133 */ 01134 01135 #ifndef htons 01136 u16_t htons(u16_t val); 01137 #endif /* htons */ 01138 01139 #ifndef ntohs 01140 #define ntohs htons 01141 #endif 01142 /** @} */ 01143 01144 /** 01145 * Pointer to the application data in the packet buffer. 01146 * 01147 * This pointer points to the application data when the application is 01148 * called. If the application wishes to send data, the application may 01149 * use this space to write the data into before calling uip_send(). 01150 */ 01151 extern void* uip_appdata; 01152 01153 #if UIP_URGDATA > 0 01154 /* u8_t *uip_urgdata: 01155 * 01156 * This pointer points to any urgent data that has been received. Only 01157 * present if compiled with support for urgent data (UIP_URGDATA). 01158 */ 01159 extern void* uip_urgdata; 01160 #endif /* UIP_URGDATA > 0 */ 01161 01162 /** 01163 * \defgroup uipdrivervars Variables used in UIP device drivers 01164 * @{ 01165 * 01166 * UIP has a few global variables that are used in device drivers for 01167 * UIP. 01168 */ 01169 01170 /** 01171 * The length of the packet in the uip_buf buffer. 01172 * 01173 * The global variable uip_len holds the length of the packet in the 01174 * uip_buf buffer. 01175 * 01176 * When the network device driver calls the UIP input function, 01177 * uip_len should be set to the length of the packet in the uip_buf 01178 * buffer. 01179 * 01180 * When sending packets, the device driver should use the contents of 01181 * the uip_len variable to determine the length of the outgoing 01182 * packet. 01183 * 01184 */ 01185 extern u16_t uip_len; 01186 01187 /** @} */ 01188 #if UIP_URGDATA > 0 01189 extern u16_t uip_urglen, uip_surglen; 01190 #endif /* UIP_URGDATA > 0 */ 01191 01192 /** 01193 * Representation of a UIP TCP connection. 01194 * 01195 * The uip_conn structure is used for identifying a connection. All 01196 * but one field in the structure are to be considered read-only by an 01197 * application. The only exception is the appstate field whos purpose 01198 * is to let the application store application-specific state (e.g., 01199 * file pointers) for the connection. The type of this field is 01200 * configured in the "uipopt.h" header file. 01201 */ 01202 01203 struct uip_conn 01204 { 01205 uip_ipaddr_t ripaddr; /**< The IP address of the remote host. */ 01206 u16_t lport; /**< The local TCP port, in network byte order. */ 01207 u16_t rport; /**< The local remote TCP port, in network byte order. */ 01208 u8_t rcv_nxt[4]; /**< The sequence number that we expect to receive next. */ 01209 u8_t snd_nxt[4]; /**< The sequence number that was last sent by us. */ 01210 u16_t len; /**< Length of the data that was previously sent. */ 01211 u16_t mss; /**< Current maximum segment size for the connection. */ 01212 u16_t initialmss; /**< Initial maximum segment size for the connection. */ 01213 u8_t sa; /**< Retransmission time-out calculation state variable. */ 01214 u8_t sv; /**< Retransmission time-out calculation state variable. */ 01215 u8_t rto; /**< Retransmission time-out. */ 01216 u8_t tcpstateflags; /**< TCP state and flags. */ 01217 u8_t timer; /**< The retransmission timer. */ 01218 u8_t nrtx; /**< The number of retransmissions for the last segment sent. */ 01219 01220 /** The application state. */ 01221 uip_tcp_appstate_t appstate; 01222 }; 01223 01224 /** 01225 * Pointer to the current TCP connection. 01226 * 01227 * The uip_conn pointer can be used to access the current TCP 01228 * connection. 01229 */ 01230 extern struct uip_conn* uip_conn; 01231 01232 /* The array containing all UIP connections. */ 01233 extern struct uip_conn uip_conns[UIP_CONNS]; 01234 01235 /** 01236 * \addtogroup uiparch 01237 * @{ 01238 */ 01239 /** 01240 * 4-byte array used for the 32-bit sequence number calculations. 01241 */ 01242 extern u8_t uip_acc32[4]; 01243 01244 /** @} */ 01245 01246 #if UIP_UDP 01247 01248 /** 01249 * Representation of a UIP UDP connection. 01250 */ 01251 struct uip_udp_conn 01252 { 01253 uip_ipaddr_t ripaddr; /**< The IP address of the remote peer. */ 01254 u16_t lport; /**< The local port number in network byte order. */ 01255 u16_t rport; /**< The remote port number in network byte order. */ 01256 u8_t ttl; /**< Default time-to-live. */ 01257 01258 /** The application state. */ 01259 uip_udp_appstate_t appstate; 01260 }; 01261 01262 /** 01263 * The current UDP connection. 01264 */ 01265 extern struct uip_udp_conn* uip_udp_conn; 01266 extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS]; 01267 #endif /* UIP_UDP */ 01268 01269 /** 01270 * The structure holding the TCP/IP statistics that are gathered if 01271 * UIP_STATISTICS is set to 1. 01272 * 01273 */ 01274 01275 struct uip_stats 01276 { 01277 struct 01278 { 01279 uip_stats_t drop; /**< Number of dropped packets at the IP layer. */ 01280 uip_stats_t recv; /**< Number of received packets at the IP layer. */ 01281 uip_stats_t sent; /**< Number of sent packets at the IP layer. */ 01282 uip_stats_t vhlerr; /**< Number of packets dropped due to wrong IP version or header length. */ 01283 uip_stats_t hblenerr; /**< Number of packets dropped due to wrong IP length, high byte. */ 01284 uip_stats_t lblenerr; /**< Number of packets dropped due to wrong IP length, low byte. */ 01285 uip_stats_t fragerr; /**< Number of packets dropped since they were IP fragments. */ 01286 uip_stats_t chkerr; /**< Number of packets dropped due to IP checksum errors. */ 01287 uip_stats_t protoerr; /**< Number of packets dropped since they were neither ICMP, UDP nor TCP. */ 01288 } ip; /**< IP statistics. */ 01289 struct 01290 { 01291 uip_stats_t drop; /**< Number of dropped ICMP packets. */ 01292 uip_stats_t recv; /**< Number of received ICMP packets. */ 01293 uip_stats_t sent; /**< Number of sent ICMP packets. */ 01294 uip_stats_t typeerr; /**< Number of ICMP packets with a wrong type. */ 01295 } icmp; /**< ICMP statistics. */ 01296 struct 01297 { 01298 uip_stats_t drop; /**< Number of dropped TCP segments. */ 01299 uip_stats_t recv; /**< Number of recived TCP segments. */ 01300 uip_stats_t sent; /**< Number of sent TCP segments. */ 01301 uip_stats_t chkerr; /**< Number of TCP segments with a bad checksum. */ 01302 uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK number. */ 01303 uip_stats_t rst; /**< Number of recevied TCP RST (reset) segments. */ 01304 uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */ 01305 uip_stats_t syndrop; /**< Number of dropped SYNs due to too few connections was avaliable. */ 01306 uip_stats_t synrst; /**< Number of SYNs for closed ports, triggering a RST. */ 01307 } tcp; /**< TCP statistics. */ 01308 #if UIP_UDP 01309 struct 01310 { 01311 uip_stats_t drop; /**< Number of dropped UDP segments. */ 01312 uip_stats_t recv; /**< Number of recived UDP segments. */ 01313 uip_stats_t sent; /**< Number of sent UDP segments. */ 01314 uip_stats_t chkerr; /**< Number of UDP segments with a bad checksum. */ 01315 } udp; /**< UDP statistics. */ 01316 #endif /* UIP_UDP */ 01317 }; 01318 01319 /** 01320 * The UIP TCP/IP statistics. 01321 * 01322 * This is the variable in which the UIP TCP/IP statistics are gathered. 01323 */ 01324 extern struct uip_stats uip_stat; 01325 01326 /*---------------------------------------------------------------------------*/ 01327 /* All the stuff below this point is internal to UIP and should not be 01328 * used directly by an application or by a device driver. 01329 */ 01330 /*---------------------------------------------------------------------------*/ 01331 /* u8_t uip_flags: 01332 * 01333 * When the application is called, uip_flags will contain the flags 01334 * that are defined in this file. Please read below for more 01335 * infomation. 01336 */ 01337 extern u8_t uip_flags; 01338 01339 /* The following flags may be set in the global variable uip_flags 01340 before calling the application callback. The UIP_ACKDATA, 01341 UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time, 01342 whereas the others are mutualy exclusive. Note that these flags 01343 should *NOT* be accessed directly, but only through the UIP 01344 functions/macros. */ 01345 01346 #define UIP_ACKDATA 1 /* Signifies that the outstanding data was 01347 acked and the application should send 01348 out new data instead of retransmitting 01349 the last data. */ 01350 01351 #define UIP_NEWDATA 2 /* Flags the fact that the peer has sent 01352 us new data. */ 01353 01354 #define UIP_REXMIT 4 /* Tells the application to retransmit the 01355 ata that was last sent. */ 01356 01357 #define UIP_POLL 8 /* Used for polling the application, to 01358 check if the application has data that 01359 it wants to send. */ 01360 01361 #define UIP_CLOSE 16 /* The remote host has closed the 01362 connection, thus the connection has 01363 gone away. Or the application signals 01364 that it wants to close the 01365 connection. */ 01366 01367 #define UIP_ABORT 32 /* The remote host has aborted the 01368 connection, thus the connection has 01369 gone away. Or the application signals 01370 that it wants to abort the 01371 connection. */ 01372 01373 #define UIP_CONNECTED 64 /* We have got a connection from a remote 01374 host and have set up a new connection 01375 for it, or an active connection has 01376 been successfully established. */ 01377 01378 #define UIP_TIMEDOUT 128 /* The connection has been aborted due to 01379 too many retransmissions. */ 01380 01381 /* uip_process(flag): 01382 * 01383 * The actual UIP function which does all the work. 01384 */ 01385 void uip_process(u8_t flag); 01386 01387 /* The following flags are passed as an argument to the uip_process() 01388 function. They are used to distinguish between the two cases where 01389 uip_process() is called. It can be called either because we have 01390 incoming data that should be processed, or because the periodic 01391 timer has fired. These values are never used directly, but only in 01392 the macrose defined in this file. */ 01393 01394 #define UIP_DATA 1 /* Tells UIP that there is incoming 01395 data in the uip_buf buffer. The 01396 length of the data is stored in the 01397 global variable uip_len. 01398 */ 01399 #define UIP_TIMER 2 /* Tells UIP that the periodic timer has fired. */ 01400 #define UIP_POLL_REQUEST 3 /* Tells UIP that a connection should be polled. */ 01401 #define UIP_UDP_SEND_CONN 4 /* Tells UIP that a UDP datagram should be constructed 01402 in the uip_buf buffer. */ 01403 01404 #if UIP_UDP 01405 #define UIP_UDP_TIMER 5 01406 #endif /* UIP_UDP */ 01407 01408 /* The TCP states used in the uip_conn->tcpstateflags. */ 01409 01410 #define UIP_CLOSED 0 01411 #define UIP_SYN_RCVD 1 01412 #define UIP_SYN_SENT 2 01413 #define UIP_ESTABLISHED 3 01414 #define UIP_FIN_WAIT_1 4 01415 #define UIP_FIN_WAIT_2 5 01416 #define UIP_CLOSING 6 01417 #define UIP_TIME_WAIT 7 01418 #define UIP_LAST_ACK 8 01419 #define UIP_TS_MASK 15 01420 01421 #define UIP_STOPPED 16 01422 01423 /* The TCP and IP headers. */ 01424 struct uip_tcpip_hdr 01425 { 01426 #if UIP_CONF_IPV6 01427 /* IPv6 header. */ 01428 u8_t vtc, tcflow; 01429 u16_t flow; 01430 u8_t len[2]; 01431 u8_t proto, ttl; 01432 uip_ip6addr_t srcipaddr, destipaddr; 01433 #else /* UIP_CONF_IPV6 */ 01434 /* IPv4 header. */ 01435 01436 u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; 01437 u16_t ipchksum; 01438 u16_t srcipaddr[2], destipaddr[2]; 01439 #endif /* UIP_CONF_IPV6 */ 01440 01441 /* TCP header. */ 01442 01443 u16_t srcport, destport; 01444 u8_t seqno[4], ackno[4], tcpoffset, flags, wnd[2]; 01445 u16_t tcpchksum; 01446 u8_t urgp[2]; 01447 u8_t optdata[4]; 01448 }; 01449 01450 /* The ICMP and IP headers. */ 01451 struct uip_icmpip_hdr 01452 { 01453 #if UIP_CONF_IPV6 01454 /* IPv6 header. */ 01455 u8_t vtc, tcf; 01456 u16_t flow; 01457 u8_t len[2]; 01458 u8_t proto, ttl; 01459 uip_ip6addr_t srcipaddr, destipaddr; 01460 #else /* UIP_CONF_IPV6 */ 01461 /* IPv4 header. */ 01462 01463 u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; 01464 u16_t ipchksum; 01465 u16_t srcipaddr[2], destipaddr[2]; 01466 #endif /* UIP_CONF_IPV6 */ 01467 01468 /* ICMP (echo) header. */ 01469 01470 u8_t type, icode; 01471 u16_t icmpchksum; 01472 #if !UIP_CONF_IPV6 01473 u16_t id, seqno; 01474 #else /* !UIP_CONF_IPV6 */ 01475 u8_t flags, reserved1, reserved2, reserved3; 01476 u8_t icmp6data[16]; 01477 u8_t options[1]; 01478 #endif /* !UIP_CONF_IPV6 */ 01479 }; 01480 01481 /* The UDP and IP headers. */ 01482 struct uip_udpip_hdr 01483 { 01484 #if UIP_CONF_IPV6 01485 /* IPv6 header. */ 01486 u8_t vtc, tcf; 01487 u16_t flow; 01488 u8_t len[2]; 01489 u8_t proto, ttl; 01490 uip_ip6addr_t srcipaddr, destipaddr; 01491 #else /* UIP_CONF_IPV6 */ 01492 /* IP header. */ 01493 01494 u8_t vhl, tos, len[2], ipid[2], ipoffset[2], ttl, proto; 01495 u16_t ipchksum; 01496 u16_t srcipaddr[2], destipaddr[2]; 01497 #endif /* UIP_CONF_IPV6 */ 01498 01499 /* UDP header. */ 01500 01501 u16_t srcport, destport; 01502 u16_t udplen; 01503 u16_t udpchksum; 01504 }; 01505 01506 /** 01507 * The buffer size available for user data in the \ref uip_buf buffer. 01508 * 01509 * This macro holds the available size for user data in the \ref 01510 * uip_buf buffer. The macro is intended to be used for checking 01511 * bounds of available user data. 01512 * 01513 * Example: 01514 \code 01515 snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i); 01516 \endcode 01517 * 01518 * \hideinitializer 01519 */ 01520 #define UIP_APPDATA_SIZE (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN) 01521 #define UIP_PROTO_ICMP 1 01522 #define UIP_PROTO_TCP 6 01523 #define UIP_PROTO_UDP 17 01524 #define UIP_PROTO_ICMP6 58 01525 01526 /* Header sizes. */ 01527 01528 #if UIP_CONF_IPV6 01529 #define UIP_IPH_LEN 40 01530 #else /* UIP_CONF_IPV6 */ 01531 01532 #define UIP_IPH_LEN 20 /* Size of IP header */ 01533 #endif /* UIP_CONF_IPV6 */ 01534 01535 #define UIP_UDPH_LEN 8 /* Size of UDP header */ 01536 01537 #define UIP_TCPH_LEN 20 /* Size of TCP header */ 01538 01539 #define UIP_IPUDPH_LEN (UIP_UDPH_LEN + UIP_IPH_LEN) /* Size of IP + 01540 UDP 01541 header */ 01542 01543 #define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN) /* Size of IP + 01544 TCP 01545 header */ 01546 01547 #define UIP_TCPIP_HLEN UIP_IPTCPH_LEN 01548 01549 #if UIP_FIXEDADDR 01550 extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; 01551 #else /* UIP_FIXEDADDR */ 01552 01553 extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; 01554 #endif /* UIP_FIXEDADDR */ 01555 01556 /** 01557 * Representation of a 48-bit Ethernet address. 01558 */ 01559 01560 struct uip_eth_addr 01561 { 01562 u8_t addr[6]; 01563 }; 01564 01565 /** 01566 * Calculate the Internet checksum over a buffer. 01567 * 01568 * The Internet checksum is the one's complement of the one's 01569 * complement sum of all 16-bit words in the buffer. 01570 * 01571 * See RFC1071. 01572 * 01573 * \param buf A pointer to the buffer over which the checksum is to be 01574 * computed. 01575 * 01576 * \param len The length of the buffer over which the checksum is to 01577 * be computed. 01578 * 01579 * \return The Internet checksum of the buffer. 01580 */ 01581 u16_t uip_chksum(u16_t* buf, u16_t len); 01582 01583 /** 01584 * Calculate the IP header checksum of the packet header in uip_buf. 01585 * 01586 * The IP header checksum is the Internet checksum of the 20 bytes of 01587 * the IP header. 01588 * 01589 * \return The IP header checksum of the IP header in the uip_buf 01590 * buffer. 01591 */ 01592 u16_t uip_ipchksum(void); 01593 01594 /** 01595 * Calculate the TCP checksum of the packet in uip_buf and uip_appdata. 01596 * 01597 * The TCP checksum is the Internet checksum of data contents of the 01598 * TCP segment, and a pseudo-header as defined in RFC793. 01599 * 01600 * \return The TCP checksum of the TCP segment in uip_buf and pointed 01601 * to by uip_appdata. 01602 */ 01603 u16_t uip_tcpchksum(void); 01604 01605 /** 01606 * Calculate the UDP checksum of the packet in uip_buf and uip_appdata. 01607 * 01608 * The UDP checksum is the Internet checksum of data contents of the 01609 * UDP segment, and a pseudo-header as defined in RFC768. 01610 * 01611 * \return The UDP checksum of the UDP segment in uip_buf and pointed 01612 * to by uip_appdata. 01613 */ 01614 u16_t uip_udpchksum(void); 01615 #endif /* __UIP_H__ */ 01616 01617 /** @} */
Generated on Fri Jul 15 2022 22:55:10 by 1.7.2