Revision 1:513c1ae9298f, committed 2015-01-10

Comitter:

iulian_radu

Date:

Sat Jan 10 21:04:29 2015 +0000

Parent:

0:e77768001bf6

Commit message:

Initial commit.

Changed in this revision

diff -r e77768001bf6 -r 513c1ae9298f main.cpp
--- a/main.cpp	Sat Dec 13 11:51:17 2014 +0000
+++ b/main.cpp	Sat Jan 10 21:04:29 2015 +0000
@@ -10,6 +10,9 @@
 };
 
 //defines
+#define TRIAC_PIN PTD5
+#define zero_CROSS_PIN PTA13
+
 #define ERROR_CMD(x) x = x | 0xC0
 #define ERROR_MSG(x) x = x | 0xC000
 #define MSG_DEFAULT 0x8000 | MIN_DIMM_VALUE
@@ -17,7 +20,7 @@
 #define MAX_PERIOD 9600 // us // teoretic 10ms 
 #define TRIAC_ON_TIME 25 //us // latimea pulsului pentru activarea triacului.
 #define DIMM_RX_BUFFER 6
-#define CONNECTION 3 // 1-PC // 2 - BT // 3 - PC + BT
+#define CONNECTION 2 // 1-PC // 2 - BT
 
 char STEPS = 255;
 signed char AUTO_DIMM_STEP = 1;
@@ -26,8 +29,8 @@
 char MAX_DIMM_VALUE = STEPS;
 
 PwmOut LED(LED_GREEN); // on board LED
-DigitalOut triacOut(PTD5); //output to Opto Triac
-InterruptIn zerroCross(PTA13); // only port A or D
+DigitalOut triacOut(TRIAC_PIN); //output to Opto Triac
+InterruptIn zeroCross(zero_CROSS_PIN); // only port A or D
 TSIAnalogSlider tsi(9, 10, 39); // board slider
 Serial pc(USBTX, USBRX);
 Serial bt(PTA2,PTA1);
@@ -82,29 +85,13 @@
             else
                 bt.printf("%u",ERROR_MSG(msg.body));
             break;
-        case 3:
-            if(!err){
-                pc.printf("%s#    MSG: %u    CMD: %u    DATA: %u\n",s,msg.body, msg.cmd, msg.data);
-                bt.printf("%u",msg.body);
-            }else{
-                pc.printf("%s#    CMD: %u   DATA %u \n",s, ERROR_CMD(msg.cmd), msg.data);
-                bt.printf("%u",ERROR_MSG(msg.body));
-            }      
-            break;
     }
 }   
 
-
-
-void ISR_zerroCross(void){
+void ISR_zeroCross(void){
     timer.attach_us(&setTriacOn,(MAX_PERIOD/STEPS) * (STEPS - dimmingLevel));
 }
 
-void ISR_Serial(void){
-    bt.gets(buffer, DIMM_RX_BUFFER);
-    LED = !LED;
-}
-
 void readData(void)
 {
     if(bt.readable()) {
@@ -182,17 +169,16 @@
 
 int main()
 {
-    zerroCross.enable_irq(); //enable routine
-    zerroCross.fall(&ISR_zerroCross); // falling edge interrupt routine
-    
+    zeroCross.enable_irq(); //enable routine
+    zeroCross.fall(&ISR_zeroCross); // falling edge interrupt routine
+    bt.baud(9600);
     //cycling.attach(&testDimming,AUTO_DIMM_PERIOD);
-    bt.attach(&ISR_Serial); // e mai bine fara intrerupere pentru ca nu apare intreruperea dimmingului 
     
     LED = 1; // led off.
     triacOut = 0; // triac off
     
     while(true){
         //testSlider();
-        //readData();
+        readData();
     }
 }
\ No newline at end of file