Workshop 2

Dependencies:   PM2_Libary

main.cpp

Committer:
pmic
Date:
2021-04-01
Revision:
2:7c03fefb77ef
Parent:
1:93d997d6b232
Child:
3:d22942631cd7

File content as of revision 2:7c03fefb77ef:

#include "mbed.h"
#include "platform/mbed_thread.h"
#include "SDBlockDevice.h"
#include "FATFileSystem.h"
#include "EncoderCounter.h"
#include "Servo.h"
#include "Controller.h"


int main()
{
    
    DigitalIn user_button(USER_BUTTON);
    
    // initialise PWM
    PwmOut pwm_motor1(PB_13);
    PwmOut pwm_motor2(PA_9);
    PwmOut pwm_motor3(PA_10);
    
    // crete Encoder read objects
    EncoderCounter counter1(PA_6, PC_7); // counter(pin A, pin B)
    EncoderCounter counter2(PB_6, PB_7);
    EncoderCounter counter3(PA_0, PA_1);
    
    // create controller
    Controller controller(pwm_motor1, pwm_motor2, counter1, counter2);
    
    DigitalOut enable(PB_15);
    
    // create servo objects
    Servo  S0(PB_2);
    Servo  S1(PC_8);
    Servo  S2(PC_6);
    
    SDBlockDevice sd(PC_12, PC_11, PC_10, PD_2);
    printf("BlockDevice created\r\n"); 
    FATFileSystem fs("fs", &sd);
    
    // Initialise the digital pin LED1 as an output
    DigitalOut myled(LED1);
    
    
    /**/
    // initialise PWM
    pwm_motor1.period(0.00005f);// 0.05ms 20KHz
    pwm_motor1.write(0.5f);
    pwm_motor2.period(0.00005f);// 0.05ms 20KHz
    pwm_motor2.write(0.5f);
    pwm_motor3.period(0.00005f);// 0.05ms 20KHz
    pwm_motor3.write(0.5f);
    
    // initialise and test Servo
    S0.Enable(1000,20000); // 1 ms / 20 ms
    S1.Enable(1000,20000);
    S2.Enable(1000,20000);
    
    int servo_desval_0 = 0;
    
    /*
    printf("Test writing... ");
    FILE* fp = fopen("/fs/data.csv", "w");
    fprintf(fp, "test %.5f\r\n",1.23);
    fclose(fp);
    printf("done\r\n");
    
    printf("Test reading... ");
    // read from SD card
    fp = fopen("/fs/data.csv", "r");
    if (fp != NULL) {
        char c = fgetc(fp);
        if (c == 't')
            printf("done\r\n");
        else
            printf("incorrect char (%c)!\n", c);
        fclose(fp);
    } else {
        printf("Reading failed!\n");
    }
    */
    
    // enable driver DC motors
    enable = 1;
    
    while (true) {
        
        if(!user_button) {
            // LED off, set controller speed, pwm2, position servo
            myled = 0;
            controller.setDesiredSpeedLeft(50.0f);
            // controller.setDesiredSpeedRight(50.0f);
            // pwm_motor1.write(0.7f);
            pwm_motor3.write(0.7f);
            
            
            S0.SetPosition(servo_desval_0);
            S1.SetPosition(1000);
            S2.SetPosition(1000);
            if(servo_desval_0 < 2000) servo_desval_0 += 100;

        } else {
            // LED on, reset controller speed, pwm2, position servo
            myled = 1;
            controller.setDesiredSpeedLeft(0.0f);
            // controller.setDesiredSpeedRight(0.0f);
            // pwm_motor1.write(0.5f);
            pwm_motor3.write(0.5f);

            servo_desval_0 = 0;
            S0.SetPosition(servo_desval_0);
            S1.SetPosition(1500);
            S2.SetPosition(1500);

        }

        
        //printf("speedLeft: %f, speedRight: %f\r\n",controller.getSpeedLeft(), controller.getSpeedRight());
        printf("counter1 = %d counter2 = %d counter3 = %d\r\n",counter1.read(), counter2.read(), counter3.read());
        
        thread_sleep_for(500);
    }
}