IoT Example

Dependencies:   C12832 LM75B MMA7660 MQTT mbed-rtos mbed

Fork of IBMIoTClientEthernetExample by IBM Watson IoT

History

sync default tip

2014-10-18, by sam_grove [Sat, 18 Oct 2014 07:45:52 +0000] rev 14

sync


sync

2014-10-18, by sam_grove [Sat, 18 Oct 2014 07:44:52 +0000] rev 13

sync


update ethernet interface

2014-10-18, by sam_grove [Sat, 18 Oct 2014 07:31:45 +0000] rev 12

update ethernet interface


Change K64F device id to be lower case

2014-10-14, by icraggs [Tue, 14 Oct 2014 15:09:04 +0000] rev 11

Change K64F device id to be lower case


Add K64F link status implementation

2014-10-10, by sam_grove [Fri, 10 Oct 2014 08:00:26 +0000] rev 10

Add K64F link status implementation


Removed conditional compilation for registration settings

2014-09-30, by icraggs [Tue, 30 Sep 2014 15:52:18 +0000] rev 9

Removed conditional compilation for registration settings


Restart to allow reconnect after cable removed

2014-09-29, by icraggs [Mon, 29 Sep 2014 11:43:52 +0000] rev 8

Restart to allow reconnect after cable removed


Add linkStatus for K64F not currently implemented but doesnt break cross platform support

2014-09-25, by sam_grove [Thu, 25 Sep 2014 18:22:51 +0000] rev 7

Add linkStatus for K64F not currently implemented but doesnt break cross platform support


Perform a software reset if the Ethernet cable is disconnected. Check for cable present status before connecting too.

2014-09-24, by sam_grove [Wed, 24 Sep 2014 21:47:40 +0000] rev 6

Perform a software reset if the Ethernet cable is disconnected. Check for cable present status before connecting too.


Refactoring for K64F

2014-08-21, by icraggs [Thu, 21 Aug 2014 12:42:19 +0000] rev 5

Refactoring for K64F