Diff: targets/hal/TARGET_NXP/TARGET_LPC81X/spi_api.c

Revision:

20:4263a77256ae

Parent:

19:398f4c622e1b

Child:

21:67d3158c7b56

--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/spi_api.c	Mon Aug 19 18:17:02 2013 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,210 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include <math.h>
-
-#include "spi_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "error.h"
-
-static const SWM_Map SWM_SPI_SSEL[] = {
-    {4, 16},
-    {5, 16},
-};
-
-static const SWM_Map SWM_SPI_SCLK[] = {
-    {3, 24},
-    {4, 24},
-};
-
-static const SWM_Map SWM_SPI_MOSI[] = {
-    {4, 0},
-    {5, 0},
-};
-
-static const SWM_Map SWM_SPI_MISO[] = {
-    {4, 8},
-    {5, 16},
-};
-
-// bit flags for used SPIs
-static unsigned char spi_used = 0;
-static int get_available_spi(void) {
-    int i;
-    for (i=0; i<2; i++) {
-        if ((spi_used & (1 << i)) == 0)
-            return i;
-    }
-    return -1;
-}
-
-static inline int ssp_disable(spi_t *obj);
-static inline int ssp_enable(spi_t *obj);
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
-    int spi_n = get_available_spi();
-    if (spi_n == -1) {
-        error("No available SPI");
-    }
-    obj->spi_n = spi_n;
-    spi_used |= (1 << spi_n);
-    
-    obj->spi = (spi_n) ? (LPC_SPI_TypeDef *)(LPC_SPI1_BASE) : (LPC_SPI_TypeDef *)(LPC_SPI0_BASE);
-    
-    const SWM_Map *swm;
-    uint32_t regVal;
-    
-    swm = &SWM_SPI_SCLK[obj->spi_n];
-    regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset);
-    LPC_SWM->PINASSIGN[swm->n] = regVal |  (sclk   << swm->offset);
-    
-    swm = &SWM_SPI_MOSI[obj->spi_n];
-    regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset);
-    LPC_SWM->PINASSIGN[swm->n] = regVal |  (mosi   << swm->offset);
-    
-    swm = &SWM_SPI_MISO[obj->spi_n];
-    regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset);
-    LPC_SWM->PINASSIGN[swm->n] = regVal |  (miso   << swm->offset);
-    
-    swm = &SWM_SPI_SSEL[obj->spi_n];
-    regVal = LPC_SWM->PINASSIGN[swm->n] & ~(0xFF << swm->offset);
-    LPC_SWM->PINASSIGN[swm->n] = regVal |  (ssel   << swm->offset);
-    
-    // clear interrupts
-    obj->spi->INTENCLR = 0x3f;
-    
-    // enable power and clocking
-    switch (obj->spi_n) {
-        case 0:
-            LPC_SYSCON->SYSAHBCLKCTRL |= (1<<11);
-            LPC_SYSCON->PRESETCTRL &= ~(0x1<<0);
-            LPC_SYSCON->PRESETCTRL |= (0x1<<0);
-            break;
-        case 1:
-            LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12);
-            LPC_SYSCON->PRESETCTRL &= ~(0x1<<1);
-            LPC_SYSCON->PRESETCTRL |= (0x1<<1);
-            break;
-    }
-    
-    // set default format and frequency
-    if (ssel == NC) {
-        spi_format(obj, 8, 0, 0);  // 8 bits, mode 0, master
-    } else {
-        spi_format(obj, 8, 0, 1);  // 8 bits, mode 0, slave
-    }
-    spi_frequency(obj, 1000000);
-    
-    // enable the ssp channel
-    ssp_enable(obj);
-}
-
-void spi_free(spi_t *obj) {}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
-    ssp_disable(obj);
-    
-    if (!(bits >= 1 && bits <= 16) || !(mode >= 0 && mode <= 3)) {
-        error("SPI format error");
-    }
-    
-    
-    int polarity = (mode & 0x2) ? 1 : 0;
-    int phase = (mode & 0x1) ? 1 : 0;
-    
-    // set it up
-    int DSS = bits - 1;            // DSS (data select size)
-    int SPO = (polarity) ? 1 : 0;  // SPO - clock out polarity
-    int SPH = (phase) ? 1 : 0;     // SPH - clock out phase
-    
-    uint32_t tmp = obj->spi->CFG;
-    tmp &= ~((1 << 2) | (1 << 4) | (1 << 5));
-    tmp |= (SPH << 4) | (SPO << 5) | ((slave ? 0 : 1) << 2);
-    obj->spi->CFG = tmp;
-    
-    // select frame length
-    tmp = obj->spi->TXDATCTL;
-    tmp &= ~(0xf << 24);
-    tmp |= (DSS << 24);
-    obj->spi->TXDATCTL = tmp;
-    
-    ssp_enable(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
-    ssp_disable(obj);
-    
-    uint32_t PCLK = SystemCoreClock;
-    
-    obj->spi->DIV = PCLK/hz - 1;
-    obj->spi->DLY = 0;
-    ssp_enable(obj);
-}
-
-static inline int ssp_disable(spi_t *obj) {
-    return obj->spi->CFG &= ~(1 << 0);
-}
-
-static inline int ssp_enable(spi_t *obj) {
-    return obj->spi->CFG |= (1 << 0);
-}
-
-static inline int ssp_readable(spi_t *obj) {
-    return obj->spi->STAT & (1 << 0);
-}
-
-static inline int ssp_writeable(spi_t *obj) {
-    return obj->spi->STAT & (1 << 1);
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
-    while (!ssp_writeable(obj));
-    // end of transfer
-    obj->spi->TXDATCTL |= (1 << 20);
-    obj->spi->TXDAT = value;
-}
-
-static inline int ssp_read(spi_t *obj) {
-    while (!ssp_readable(obj));
-    return obj->spi->RXDAT;
-}
-
-static inline int ssp_busy(spi_t *obj) {
-    // TODO
-    return 0;
-}
-
-int spi_master_write(spi_t *obj, int value) {
-    ssp_write(obj, value);
-    return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
-    return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0);
-};
-
-int spi_slave_read(spi_t *obj) {
-    return obj->spi->RXDAT;
-}
-
-void spi_slave_write(spi_t *obj, int value) {
-    while (ssp_writeable(obj) == 0) ;
-    obj->spi->TXDAT = value;
-}
-
-int spi_busy(spi_t *obj) {
-    return ssp_busy(obj);
-}