Zhe Hu

Zhe’s activity

Question asked: mbed connects with raspberry pi vis SerialPC: I like the direct USB cable connection between mbed and pi, avoiding hand-wire mbed serial …
Zhe Hu - 10 Jun 2015
Question asked: s0 = 6.4 (where does that come from): according to ti tmp006 datasheet, this s0 parameter comes from some calibration process, that is …
Zhe Hu - 28 Sep 2014
Comment on: MBED USB HID fails to detach after unplug USB cable - It seems like my exe crashes during the earlier test. It probably fails to release …
Zhe Hu - 13 Jun 2013
Question asked: MBED USB HID fails to detach after unplug USB cable: I downloaded the handbook USB HID sample program to MBED and used HID API on …
Zhe Hu - 12 Jun 2013
New topic how fast to use UDP instread of RS232 (UART): It seems that MBED is capable of ethernet communication. How fast is it to do …
Zhe Hu - 19 Aug 2010
New topic how fast to read a byte from SD card: I'd like to store 1G-size binary file on the SD card, which can be read …
Zhe Hu - 11 Aug 2010
Reply to Is there a way to change the date on a .bin file from within a program, reset the mbed and run a different program? - Hi Mark, Do you have this "switching bin file" method working? I'd like to have …
Zhe Hu - 26 Jul 2010
New topic can a pin be both InterruptIn and DigitalIn: I'd like to confirm that it is valid to assign a pin to be both …
Zhe Hu - 26 Jul 2010
Program: interruptTest
Zhe Hu - 22 Jul 2010
Reply to level sensitive interrupt trigger - interruptTest2 I did some de-bouncing as shown in the attached code (which I copied from …
Zhe Hu - 22 Jul 2010

Zhe’s public repositories

  • Mbed 2 deprecated
    interruptTest

    interrupt trigger on both rising and falling edge (for level sensitive triggering)

    Last updated: 22 Jul 2010 1 33
  • Mbed 2 deprecated
    interruptTest2

    interrupt rising/falling edge test

    interrupt
    Last updated: 22 Jul 2010 1 47
See all repositories