Zoltan Hudak / Mbed OS WebSwitch_ENC28J60 Featured

HTTP Server serving a simple webpage which enables to remotely turn a digital output on/off. Compile, download, run and type 'IP_address/secret/' (don't forget the last '/') into your web browser and hit ENTER.

Dependencies:   UIPEthernet

Turn LED1, or other digital output, on/off using a web browser.

In this example we create a HTTP server that will serve a simple Web page to remotely turn LED1, or other digital output on the mbed board, on/off by using a web browser. An inexpensive ENC28J60 Ethernet module is used to assure connection between the mbed board and the Ethernet network (Internet). The ENC28J60 Ethernet module is driven by the UIPEthernet library.

Needed parts:

• mbed board
• ENC28J60 Ethernet module
• Wires
• Web browser (Internet Explorer, Safari, Firefox, Chrome ...) running on Windows, Mac, Linux, iPhone or Android device.

Notice that DHCP is turned on by default. If you prefer to use static IP address then uncomment line 234

The IP address assigned to the WebSwitch server along with an instruction how to use it is printed in the connected PC's serial terminal window during program start up.

The project was inspired by the Tuxgraphics Web Switch. Thank you Guido!

NOTE:

• For a Web Switch using a WIZ550io or W5500 Ethernet module see WebSwitch_Wiz550io.
• For a Web Switch using mbed's built in Ethernet PHY see WebSwitch_mbed-dev or WebSwitch_mbed-os .