Diff: main.cpp

Revision:

23:069287e799cd

Parent:

22:f4682a5ddda6

Child:

24:e2907bcba75e

diff -r f4682a5ddda6 -r 069287e799cd main.cpp
--- a/main.cpp	Thu Dec 01 22:01:11 2016 +0000
+++ b/main.cpp	Tue Mar 07 19:12:22 2017 +0000
@@ -18,6 +18,7 @@
  * Once the binaries have been downloaded to the boards reset board #1.
  *
  */ 
+#include "CANnucleo.h"
 
 #define BOARD1                1     // comment out this line when compiling for board #2
 //#define TARGET_STM32F103C8T6  1     // uncomment this line when using STM32F103C8T6 boards!                                    
@@ -41,7 +42,6 @@
     const unsigned int TX_ID = 0x100;
 #endif
 
-#include "CANnucleo.h"
 #include "mbed.h"
 
 /* 
@@ -53,7 +53,7 @@
 CANnucleo::CANMessage   rxMsg;
 CANnucleo::CANMessage   txMsg;
 DigitalOut              led(LED_PIN);
-int                     ledState;
+int                     ledStatus;
 Timer                   timer;
 int                     counter = 0;
 volatile bool           msgAvailable = false;
@@ -81,6 +81,7 @@
     confSysClock();     //Configure system clock (72MHz HSE clock, 48MHz USB clock)
 #endif
     pc = new Serial(PA_2, PA_3);
+    pc->baud(115200);
     can = new CANnucleo::CAN(PA_11, PA_12);      // CAN Rx pin name, CAN Tx pin name
     can->frequency(1000000);                     // set bit rate to 1Mbps
     can->attach(&onMsgReceived);                 // attach 'CAN receive-complete' interrupt handler
@@ -95,15 +96,15 @@
 #endif
 
     while(1) {
-        if(timer.read_ms() >= 1000) {               // check for timeout
+        if(timer.read_ms() >= 1000) {           // check for timeout
             timer.stop();                       // stop timer
             timer.reset();                      // reset timer
             counter++;                          // increment counter
-            ledState = led.read();              // get led state
+            ledStatus = led.read();              // get led state
             txMsg.clear();                      // clear Tx message storage
             txMsg.id = TX_ID;                   // set ID
             txMsg << counter;                   // append first data item
-            txMsg << ledState;                  // append second data item (total data lenght must be <= 8 bytes!)
+            txMsg << ledStatus;                  // append second data item (total data lenght must be <= 8 bytes!)
             led = OFF;                          // turn LED off
             if(can->write(txMsg))               // transmit message
                 pc->printf("CAN message sent\r\n"); 
@@ -125,7 +126,7 @@
             // Filtering performed by software:           
             if(rxMsg.id == RX_ID) {             // See comments in CANnucleo.cpp for filtering performed by hardware
                 rxMsg >> counter;               // extract first data item
-                rxMsg >> ledState;              // extract second data item
+ //               rxMsg >> ledStatus;              // extract second data item
                 pc->printf("  counter = %d\r\n", counter);
                 led = ON;                       // turn LED on
                 timer.start();                  // transmission lag
@@ -133,6 +134,3 @@
         }
     }
 }
-
-
-