Diff: stm32f4xx_hal_msp.cpp

Revision:

0:8a83ba215cd0

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_hal_msp.cpp	Mon Aug 25 15:09:19 2014 +0000
@@ -0,0 +1,134 @@
+/**
+  ******************************************************************************
+  * File Name          : stm32f4xx_hal_msp.c
+  * Date               : 21/08/2014 07:33:40
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  *
+  * COPYRIGHT(c) 2014 STMicroelectronics
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+  if(hadc->Instance==ADC1)
+  {
+    /* Peripheral clock enable */
+    __ADC1_CLK_ENABLE();
+  
+    /**ADC1 GPIO Configuration    
+    PA0-WKUP     ------> ADC1_IN0 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_0;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  }
+
+}
+
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+
+  if(hadc->Instance==ADC1)
+  {
+    /* Peripheral clock disable */
+    __ADC1_CLK_DISABLE();
+  
+    /**ADC1 GPIO Configuration    
+    PA0-WKUP     ------> ADC1_IN0 
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);
+
+  }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+  if(huart->Instance==USART2)
+  {
+    /* Peripheral clock enable */
+    __USART2_CLK_ENABLE();
+  
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  }
+
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+
+  if(huart->Instance==USART2)
+  {
+    /* Peripheral clock disable */
+    __USART2_CLK_DISABLE();
+  
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
+
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/