Masahiko Yamazaki
For Hepta-Sat Lite
Revision 0:c92d21a4e8c2, committed 2021-11-01
- Comitter:
- goro56
- Date:
- Mon Nov 01 07:44:54 2021 +0000
- Commit message:
- Lite Geomagnetic
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
diff -r 000000000000 -r c92d21a4e8c2 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Mon Nov 01 07:44:54 2021 +0000
@@ -0,0 +1,85 @@
+#include "mbed.h"
+I2C i2c(PB_7, PB_6);
+Serial pc(USBTX, USBRX, 9600);
+const int addr_accel_gyro = 0xD0;
+const int addr_compus = 0x18;
+
+
+char cmd[2];
+char data[1];
+char adata[1];
+char mxl[1], mxh[1], myl[1], myh[1], mzl[1], mzh[1] , st[1];
+double mg_x, mg_y, mg_z, MX, MY, MZ;
+
+int main() {
+ pc.printf("Start detectiong magnetism\r\n");
+ wait(1.0);
+ i2c.frequency(100000);
+
+ cmd[0]=0x6B;
+ cmd[1]=0x00;
+ i2c.write(addr_accel_gyro,cmd,2);
+ cmd[0] = 0x37;
+ cmd[1] = 0x02;
+ i2c.write(addr_accel_gyro,cmd,2);
+
+ //write address of compus
+ adata[0] = 0x0A;
+ adata[1] = 0x12;
+ i2c.write(addr_compus,adata,2);
+ i2c.stop();
+ wait(1);
+
+ while(1) {
+
+ //=========== x ===========
+ //read mxl
+ adata[0] = 0x03;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,mxl,1);
+
+ //read mxh
+ adata[0] = 0x04;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,mxh,1);
+
+
+ //=========== y ===========
+ adata[0] = 0x05;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,myl,1);
+
+ adata[0] = 0x06;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,myh,1);
+
+
+ //=========== z ===========
+ adata[0] = 0x07;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,mzl,1);
+
+ adata[0] = 0x08;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,mzh,1);
+
+ //status
+ adata[0] = 0x09;
+ i2c.write(addr_compus,adata,1);
+ i2c.read(addr_compus|0x01,st,1);
+
+
+
+ mg_x = short((mxh[0]<<8)|(mxl[0]));
+ mg_y = short((myh[0]<<8)|(myl[0]));
+ mg_z = short((mzh[0]<<8)|(mzl[0]));
+ MX = mg_x*0.15;
+ MY = mg_y*0.15;
+ MZ = mg_z*0.15;
+ pc.printf("MX= %f,MY= %f,MZ= %f\r\n",MX,MY,MZ);
+
+ wait(0.5);
+
+ }
+
+}
diff -r 000000000000 -r c92d21a4e8c2 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Mon Nov 01 07:44:54 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/e1686b8d5b90 \ No newline at end of file