stm32l0xx_hal_conf.h

00001 /**
00002   ******************************************************************************
00003   * @file    stm32l0xx_hal_conf.h
00004   * @author  MCD Application Team
00005   * @version V1.0.0
00006   * @date    24-April-2014
00007   * @brief   HAL configuration file.
00008   ******************************************************************************
00009   * @attention
00010   *
00011   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
00012   *
00013   * Redistribution and use in source and binary forms, with or without modification,
00014   * are permitted provided that the following conditions are met:
00015   *   1. Redistributions of source code must retain the above copyright notice,
00016   *      this list of conditions and the following disclaimer.
00017   *   2. Redistributions in binary form must reproduce the above copyright notice,
00018   *      this list of conditions and the following disclaimer in the documentation
00019   *      and/or other materials provided with the distribution.
00020   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00021   *      may be used to endorse or promote products derived from this software
00022   *      without specific prior written permission.
00023   *
00024   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00025   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00026   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00027   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00028   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00029   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00030   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034   *
00035   ******************************************************************************
00036   */ 
00037 
00038 /* Define to prevent recursive inclusion -------------------------------------*/
00039 #ifndef __STM32L0xx_HAL_CONF_H
00040 #define __STM32L0xx_HAL_CONF_H
00041 
00042 #ifdef __cplusplus
00043  extern "C" {
00044 #endif
00045 
00046 /* Exported types ------------------------------------------------------------*/
00047 /* Exported constants --------------------------------------------------------*/
00048 
00049 /* ########################## Module Selection ############################## */
00050 /**
00051   * @brief This is the list of modules to be used in the HAL driver 
00052   */
00053 #define HAL_MODULE_ENABLED  
00054  #define HAL_ADC_MODULE_ENABLED 
00055 /* #define HAL_COMP_MODULE_ENABLED */ 
00056 /* #define HAL_CRC_MODULE_ENABLED */  
00057 /* #define HAL_CRYP_MODULE_ENABLED */ 
00058 /* #define HAL_DAC_MODULE_ENABLED */   
00059 #define HAL_DMA_MODULE_ENABLED
00060 #define HAL_FLASH_MODULE_ENABLED 
00061 #define HAL_GPIO_MODULE_ENABLED
00062 /* #define HAL_I2C_MODULE_ENABLED */
00063 /* #define HAL_I2S_MODULE_ENABLED */   
00064 /* #define HAL_IWDG_MODULE_ENABLED */
00065 /* #define HAL_LCD_MODULE_ENABLED */ 
00066 /* #define HAL_LPTIM_MODULE_ENABLED */
00067 #define HAL_PWR_MODULE_ENABLED  
00068 #define HAL_RCC_MODULE_ENABLED 
00069 /* #define HAL_RNG_MODULE_ENABLED */    
00070 /* #define HAL_RTC_MODULE_ENABLED */
00071 #define HAL_SPI_MODULE_ENABLED  
00072 /* #define HAL_TIM_MODULE_ENABLED */   
00073 /* #define HAL_UART_MODULE_ENABLED */ 
00074 /* #define HAL_USART_MODULE_ENABLED */ 
00075 /* #define HAL_IRDA_MODULE_ENABLED */ 
00076 /* #define HAL_SMARTCARD_MODULE_ENABLED */
00077 /* #define HAL_SMBUS_MODULE_ENABLED */  
00078 /* #define HAL_WWDG_MODULE_ENABLED  */ 
00079 #define HAL_CORTEX_MODULE_ENABLED
00080 /* #define HAL_PCD_MODULE_ENABLED */
00081 
00082 
00083 /* ########################## Oscillator Values adaptation ####################*/
00084 /**
00085   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
00086   *        This value is used by the RCC HAL module to compute the system frequency
00087   *        (when HSE is used as system clock source, directly or through the PLL).  
00088   */
00089 #if !defined  (HSE_VALUE) 
00090   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
00091 #endif /* HSE_VALUE */
00092 
00093 #if !defined  (HSE_STARTUP_TIMEOUT)
00094   #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
00095 #endif /* HSE_STARTUP_TIMEOUT */
00096 
00097 /**
00098   * @brief Internal Multiple Speed oscillator (MSI) default value.
00099   *        This value is the default MSI range value after Reset.
00100   */
00101 #if !defined  (MSI_VALUE)
00102   #define MSI_VALUE    ((uint32_t)2000000) /*!< Value of the Internal oscillator in Hz*/
00103 #endif /* MSI_VALUE */
00104    
00105 /**
00106   * @brief Internal High Speed oscillator (HSI) value.
00107   *        This value is used by the RCC HAL module to compute the system frequency
00108   *        (when HSI is used as system clock source, directly or through the PLL). 
00109   */
00110 #if !defined  (HSI_VALUE)
00111   #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
00112 #endif /* HSI_VALUE */
00113    
00114 /**
00115   * @brief External Low Speed oscillator (LSE) value.
00116   *        This value is used by the UART, RTC HAL module to compute the system frequency
00117   */
00118 #if !defined  (LSE_VALUE)
00119   #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
00120 #endif /* LSE_VALUE */
00121 
00122    
00123 #if !defined  (LSE_STARTUP_TIMEOUT)
00124   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
00125 #endif /* HSE_STARTUP_TIMEOUT */
00126 
00127    
00128 /* Tip: To avoid modifying this file each time you need to use different HSE,
00129    ===  you can define the HSE value in your toolchain compiler preprocessor. */
00130 
00131 /* ########################### System Configuration ######################### */
00132 /**
00133   * @brief This is the HAL system configuration section
00134   */     
00135 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */ 
00136 #define  TICK_INT_PRIORITY            ((uint32_t)3)    /*!< tick interrupt priority */           
00137 #define  USE_RTOS                     0     
00138 #define  PREFETCH_ENABLE              1              
00139 #define  PREREAD_ENABLE               1
00140 #define  BUFFER_CACHE_DISABLE         0
00141 
00142 /* ########################## Assert Selection ############################## */
00143 /**
00144   * @brief Uncomment the line below to expanse the "assert_param" macro in the 
00145   *        HAL drivers code
00146   */
00147 /* #define USE_FULL_ASSERT    1 */
00148 
00149 /* Includes ------------------------------------------------------------------*/
00150 /**
00151   * @brief Include module's header file 
00152   */
00153 
00154 #ifdef HAL_RCC_MODULE_ENABLED
00155   #include "stm32l0xx_hal_rcc.h"
00156 #endif /* HAL_RCC_MODULE_ENABLED */
00157 
00158 #ifdef HAL_GPIO_MODULE_ENABLED
00159   #include "stm32l0xx_hal_gpio.h"
00160 #endif /* HAL_GPIO_MODULE_ENABLED */
00161 
00162 #ifdef HAL_DMA_MODULE_ENABLED
00163   #include "stm32l0xx_hal_dma.h"
00164 #endif /* HAL_DMA_MODULE_ENABLED */
00165    
00166 #ifdef HAL_CORTEX_MODULE_ENABLED
00167   #include "stm32l0xx_hal_cortex.h"
00168 #endif /* HAL_CORTEX_MODULE_ENABLED */
00169 
00170 #ifdef HAL_ADC_MODULE_ENABLED
00171   #include "stm32l0xx_hal_adc.h"
00172 #endif /* HAL_ADC_MODULE_ENABLED */
00173 
00174 #ifdef HAL_COMP_MODULE_ENABLED
00175   #include "stm32l0xx_hal_comp.h"
00176 #endif /* HAL_COMP_MODULE_ENABLED */
00177    
00178 #ifdef HAL_CRC_MODULE_ENABLED
00179   #include "stm32l0xx_hal_crc.h"
00180 #endif /* HAL_CRC_MODULE_ENABLED */
00181 
00182 #ifdef HAL_CRYP_MODULE_ENABLED
00183   #include "stm32l0xx_hal_cryp.h"
00184 #endif /* HAL_CRYP_MODULE_ENABLED */
00185 
00186 #ifdef HAL_DAC_MODULE_ENABLED
00187   #include "stm32l0xx_hal_dac.h"
00188 #endif /* HAL_DAC_MODULE_ENABLED */
00189 
00190 #ifdef HAL_FLASH_MODULE_ENABLED
00191   #include "stm32l0xx_hal_flash.h"
00192 #endif /* HAL_FLASH_MODULE_ENABLED */
00193  
00194 #ifdef HAL_I2C_MODULE_ENABLED
00195  #include "stm32l0xx_hal_i2c.h"
00196 #endif /* HAL_I2C_MODULE_ENABLED */
00197 
00198 #ifdef HAL_I2S_MODULE_ENABLED
00199  #include "stm32l0xx_hal_i2s.h"
00200 #endif /* HAL_I2S_MODULE_ENABLED */
00201 
00202 #ifdef HAL_IWDG_MODULE_ENABLED
00203  #include "stm32l0xx_hal_iwdg.h"
00204 #endif /* HAL_IWDG_MODULE_ENABLED */
00205 
00206 #ifdef HAL_LCD_MODULE_ENABLED
00207  #include "stm32l0xx_hal_lcd.h"
00208 #endif /* HAL_LCD_MODULE_ENABLED */
00209 
00210 #ifdef HAL_LPTIM_MODULE_ENABLED
00211 #include "stm32l0xx_hal_lptim.h"
00212 #endif /* HAL_LPTIM_MODULE_ENABLED */
00213    
00214 #ifdef HAL_PWR_MODULE_ENABLED
00215  #include "stm32l0xx_hal_pwr.h"
00216 #endif /* HAL_PWR_MODULE_ENABLED */
00217 
00218 #ifdef HAL_RNG_MODULE_ENABLED
00219  #include "stm32l0xx_hal_rng.h"
00220 #endif /* HAL_RNG_MODULE_ENABLED */
00221 
00222 #ifdef HAL_RTC_MODULE_ENABLED
00223  #include "stm32l0xx_hal_rtc.h"
00224 
00225 #endif /* HAL_RTC_MODULE_ENABLED */
00226 
00227 #ifdef HAL_SPI_MODULE_ENABLED
00228  #include "stm32l0xx_hal_spi.h"
00229 #endif /* HAL_SPI_MODULE_ENABLED */
00230 
00231 #ifdef HAL_TIM_MODULE_ENABLED
00232  #include "stm32l0xx_hal_tim.h"
00233 #endif /* HAL_TIM_MODULE_ENABLED */
00234 
00235 #ifdef HAL_UART_MODULE_ENABLED
00236  #include "stm32l0xx_hal_uart.h"
00237 #endif /* HAL_UART_MODULE_ENABLED */
00238 
00239 #ifdef HAL_USART_MODULE_ENABLED
00240  #include "stm32l0xx_hal_usart.h"
00241 #endif /* HAL_USART_MODULE_ENABLED */
00242 
00243 #ifdef HAL_IRDA_MODULE_ENABLED
00244  #include "stm32l0xx_hal_irda.h"
00245 #endif /* HAL_IRDA_MODULE_ENABLED */
00246 
00247 #ifdef HAL_SMARTCARD_MODULE_ENABLED
00248  #include "stm32l0xx_hal_smartcard.h"
00249 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
00250 
00251 #ifdef HAL_SMBUS_MODULE_ENABLED
00252  #include "stm32l0xx_hal_smbus.h"
00253 #endif /* HAL_SMBUS_MODULE_ENABLED */
00254 
00255 #ifdef HAL_WWDG_MODULE_ENABLED
00256  #include "stm32l0xx_hal_wwdg.h"
00257 #endif /* HAL_WWDG_MODULE_ENABLED */
00258 
00259 #ifdef HAL_PCD_MODULE_ENABLED
00260  #include "stm32l0xx_hal_pcd.h"
00261 #endif /* HAL_PCD_MODULE_ENABLED */
00262 
00263 /* Exported macro ------------------------------------------------------------*/
00264 #ifdef  USE_FULL_ASSERT
00265 /**
00266   * @brief  The assert_param macro is used for function's parameters check.
00267   * @param  expr: If expr is false, it calls assert_failed function
00268   *         which reports the name of the source file and the source
00269   *         line number of the call that failed. 
00270   *         If expr is true, it returns no value.
00271   * @retval None
00272   */
00273   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
00274 /* Exported functions ------------------------------------------------------- */
00275   void assert_failed(uint8_t* file, uint32_t line);
00276 #else
00277   #define assert_param(expr) ((void)0)
00278 #endif /* USE_FULL_ASSERT */
00279 
00280 #ifdef __cplusplus
00281 }
00282 #endif
00283 
00284 #endif /* __STM32L0xx_HAL_CONF_H */
00285  
00286 
00287 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/