SSD1306.h

00001 #ifndef MBED_SSD1306_H
00002 #define MBED_SSD1306_H
00003 
00004 #include "mbed.h"
00005 #include "LCD.h"
00006 
00007 /** Class for SSD1306 display controller
00008 * to be copypasted and adapted for other controllers
00009 */
00010 class SSD1306 : public LCD
00011 {
00012  
00013  public:
00014 
00015     /** Create a PAR display interface
00016     * @param displayproto only supports PAR_8
00017     * @param port GPIO port name to use
00018     * @param CS pin connected to CS of display
00019     * @param reset pin connected to RESET of display
00020     * @param DC pin connected to data/command of display
00021     * @param WR pin connected to SDI of display
00022     * @param RD pin connected to RS of display
00023     * @param name The name used by the parent class to access the interface
00024     * @param LCDSIZE_X x size in pixel - optional
00025     * @param LCDSIZE_Y y size in pixel - optional
00026     */ 
00027     SSD1306(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
00028   
00029     /** Create an SPI display interface
00030     * @param displayproto SPI_8 or SPI_16
00031     * @param Hz SPI speed in Hz
00032     * @param mosi SPI pin
00033     * @param miso SPI pin
00034     * @param sclk SPI pin
00035     * @param CS pin connected to CS of display
00036     * @param reset pin connected to RESET of display
00037     * @param DC pin connected to data/command of display
00038     * @param name The name used by the parent class to access the interface
00039     * @param LCDSIZE_X x size in pixel - optional
00040     * @param LCDSIZE_Y y size in pixel - optional
00041     */ 
00042     SSD1306(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
00043 
00044     /** Create an I2C display interface
00045     * @param displayproto I2C_
00046     * @param Hz I2C speed in Hz
00047     * @param address I2C address
00048     * @param sda I2C pin
00049     * @param scl I2C pin
00050     * @param name The name used by the parent class to access the interface
00051     * @param LCDSIZE_X x size in pixel - optional
00052     * @param LCDSIZE_Y y size in pixel - optional
00053     */ 
00054     SSD1306(proto_t displayproto, int Hz, int address, PinName sda, PinName scl, const char* name , unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
00055 
00056 
00057 
00058     /** set the contrast of the screen
00059       * @note here overrided because of not standard value range
00060       * @param o contrast 0-255
00061       */
00062     virtual void set_contrast(int o);
00063     
00064     /** set automatc horizontal scroll mode
00065      * @param l_r direction - left = 0, right = 1
00066      * @param s_page start page
00067      * @param e_page end page
00068      * @param speed time between horizontal shift. 0 slow .. 7 fast
00069      */
00070     void horizontal_scroll(int l_r,int s_page,int e_page,int speed);
00071 
00072     /** automatic horizontal + vertical scroll mode
00073      * @param l_r direction - left = 0, right = 1
00074      * @param s_page start page
00075      * @param e_page end page
00076      * @param v_off vertical offset for scroll
00077      * @param speed time between horizontal shift. 0 slow .. 7 fast
00078      */
00079     void horiz_vert_scroll(int l_r,int s_page,int e_page,int v_off,int speed);
00080 
00081     /** end scroll mode
00082      *
00083      */
00084     void end_scroll(void);
00085     protected:
00086     
00087     
00088     /** Init command sequence  
00089     */
00090     void init();
00091     
00092     /** set mirror mode
00093       * @note here overriding the LCD class default one because of not standard commands
00094       * @param mode NONE, X, Y, XY 
00095       */
00096     virtual void mirrorXY(mirror_t mode);
00097 
00098 };
00099 
00100 
00101 #endif