NetworkStack.h

00001 
00002 /* NetworkStack
00003  * Copyright (c) 2015 ARM Limited
00004  *
00005  * Licensed under the Apache License, Version 2.0 (the "License");
00006  * you may not use this file except in compliance with the License.
00007  * You may obtain a copy of the License at
00008  *
00009  *     http://www.apache.org/licenses/LICENSE-2.0
00010  *
00011  * Unless required by applicable law or agreed to in writing, software
00012  * distributed under the License is distributed on an "AS IS" BASIS,
00013  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00014  * See the License for the specific language governing permissions and
00015  * limitations under the License.
00016  */
00017 
00018 #ifndef NETWORK_STACK_H
00019 #define NETWORK_STACK_H
00020 
00021 #include "nsapi_types.h"
00022 #include "netsocket/SocketAddress.h"
00023 #include "netsocket/NetworkInterface.h"
00024 
00025 
00026 /** NetworkStack class
00027  *
00028  *  Common interface that is shared between hardware that
00029  *  can connect to a network over IP. By implementing the
00030  *  NetworkStack, a network stack can be used as a target
00031  *  for instantiating network sockets.
00032  *  @addtogroup netsocket
00033  */
00034 class NetworkStack
00035 {
00036 public:
00037     virtual ~NetworkStack() {};
00038 
00039     /** Get the local IP address
00040      *
00041      *  @return         Null-terminated representation of the local IP address
00042      *                  or null if not yet connected
00043      */
00044     virtual const char *get_ip_address() = 0;
00045 
00046     /** Translates a hostname to an IP address with specific version
00047      *
00048      *  The hostname may be either a domain name or an IP address. If the
00049      *  hostname is an IP address, no network transactions will be performed.
00050      *
00051      *  If no stack-specific DNS resolution is provided, the hostname
00052      *  will be resolve using a UDP socket on the stack.
00053      *
00054      *  @param host     Hostname to resolve
00055      *  @param address  Destination for the host SocketAddress
00056      *  @param version  IP version of address to resolve, NSAPI_UNSPEC indicates
00057      *                  version is chosen by the stack (defaults to NSAPI_UNSPEC)
00058      *  @return         0 on success, negative error code on failure
00059      */
00060     virtual nsapi_error_t gethostbyname(const char *host,
00061             SocketAddress *address, nsapi_version_t version = NSAPI_UNSPEC );
00062 
00063     /** Add a domain name server to list of servers to query
00064      *
00065      *  @param address  Destination for the host address
00066      *  @return         0 on success, negative error code on failure
00067      */
00068     virtual nsapi_error_t add_dns_server(const SocketAddress &address);
00069 
00070     /*  Set stack options
00071      *
00072      *  setstackopt allows an application to pass stack-specific options
00073      *  to the underlying stack using stack-specific level and option names,
00074      *  or to request generic options using levels from nsapi_stack_level_t.
00075      *
00076      *  For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned
00077      *  and the stack is unmodified.
00078      *
00079      *  @param level    Stack-specific protocol level or nsapi_stack_level_t
00080      *  @param optname  Level-specific option name
00081      *  @param optval   Option value
00082      *  @param optlen   Length of the option value
00083      *  @return         0 on success, negative error code on failure
00084      */
00085     virtual nsapi_error_t setstackopt(int level, int optname, const void *optval, unsigned optlen);
00086 
00087     /*  Get stack options
00088      *
00089      *  getstackopt allows an application to retrieve stack-specific options
00090      *  to the underlying stack using stack-specific level and option names,
00091      *  or to request generic options using levels from nsapi_stack_level_t.
00092      *
00093      *  @param level    Stack-specific protocol level or nsapi_stack_level_t
00094      *  @param optname  Level-specific option name
00095      *  @param optval   Destination for option value
00096      *  @param optlen   Length of the option value
00097      *  @return         0 on success, negative error code on failure
00098      */
00099     virtual nsapi_error_t getstackopt(int level, int optname, void *optval, unsigned *optlen);
00100 
00101 protected:
00102     friend class Socket;
00103     friend class UDPSocket;
00104     friend class TCPSocket;
00105     friend class TCPServer;
00106 
00107     /** Opens a socket
00108      *
00109      *  Creates a network socket and stores it in the specified handle.
00110      *  The handle must be passed to following calls on the socket.
00111      *
00112      *  A stack may have a finite number of sockets, in this case
00113      *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
00114      *
00115      *  @param handle   Destination for the handle to a newly created socket
00116      *  @param proto    Protocol of socket to open, NSAPI_TCP or NSAPI_UDP
00117      *  @return         0 on success, negative error code on failure
00118      */
00119     virtual nsapi_error_t socket_open(nsapi_socket_t *handle, nsapi_protocol_t proto) = 0;
00120 
00121     /** Close the socket
00122      *
00123      *  Closes any open connection and deallocates any memory associated
00124      *  with the socket.
00125      *
00126      *  @param handle   Socket handle
00127      *  @return         0 on success, negative error code on failure
00128      */
00129     virtual nsapi_error_t socket_close(nsapi_socket_t handle) = 0;
00130 
00131     /** Bind a specific address to a socket
00132      *
00133      *  Binding a socket specifies the address and port on which to receive
00134      *  data. If the IP address is zeroed, only the port is bound.
00135      *
00136      *  @param handle   Socket handle
00137      *  @param address  Local address to bind
00138      *  @return         0 on success, negative error code on failure.
00139      */
00140     virtual nsapi_error_t socket_bind(nsapi_socket_t handle, const SocketAddress &address) = 0;
00141 
00142     /** Listen for connections on a TCP socket
00143      *
00144      *  Marks the socket as a passive socket that can be used to accept
00145      *  incoming connections.
00146      *
00147      *  @param handle   Socket handle
00148      *  @param backlog  Number of pending connections that can be queued
00149      *                  simultaneously
00150      *  @return         0 on success, negative error code on failure
00151      */
00152     virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog) = 0;
00153 
00154     /** Connects TCP socket to a remote host
00155      *
00156      *  Initiates a connection to a remote server specified by the
00157      *  indicated address.
00158      *
00159      *  @param handle   Socket handle
00160      *  @param address  The SocketAddress of the remote host
00161      *  @return         0 on success, negative error code on failure
00162      */
00163     virtual nsapi_error_t socket_connect(nsapi_socket_t handle, const SocketAddress &address) = 0;
00164 
00165     /** Accepts a connection on a TCP socket
00166      *
00167      *  The server socket must be bound and set to listen for connections.
00168      *  On a new connection, creates a network socket and stores it in the
00169      *  specified handle. The handle must be passed to following calls on
00170      *  the socket.
00171      *
00172      *  A stack may have a finite number of sockets, in this case
00173      *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
00174      *
00175      *  This call is non-blocking. If accept would block,
00176      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
00177      *
00178      *  @param server   Socket handle to server to accept from
00179      *  @param handle   Destination for a handle to the newly created socket
00180      *  @param address  Destination for the remote address or NULL
00181      *  @return         0 on success, negative error code on failure
00182      */
00183     virtual nsapi_error_t socket_accept(nsapi_socket_t server,
00184             nsapi_socket_t *handle, SocketAddress *address=0) = 0;
00185 
00186     /** Send data over a TCP socket
00187      *
00188      *  The socket must be connected to a remote host. Returns the number of
00189      *  bytes sent from the buffer.
00190      *
00191      *  This call is non-blocking. If send would block,
00192      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
00193      *
00194      *  @param handle   Socket handle
00195      *  @param data     Buffer of data to send to the host
00196      *  @param size     Size of the buffer in bytes
00197      *  @return         Number of sent bytes on success, negative error
00198      *                  code on failure
00199      */
00200     virtual nsapi_size_or_error_t socket_send(nsapi_socket_t handle,
00201             const void *data, nsapi_size_t size) = 0;
00202 
00203     /** Receive data over a TCP socket
00204      *
00205      *  The socket must be connected to a remote host. Returns the number of
00206      *  bytes received into the buffer.
00207      *
00208      *  This call is non-blocking. If recv would block,
00209      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
00210      *
00211      *  @param handle   Socket handle
00212      *  @param data     Destination buffer for data received from the host
00213      *  @param size     Size of the buffer in bytes
00214      *  @return         Number of received bytes on success, negative error
00215      *                  code on failure
00216      */
00217     virtual nsapi_size_or_error_t socket_recv(nsapi_socket_t handle,
00218             void *data, nsapi_size_t size) = 0;
00219 
00220     /** Send a packet over a UDP socket
00221      *
00222      *  Sends data to the specified address. Returns the number of bytes
00223      *  sent from the buffer.
00224      *
00225      *  This call is non-blocking. If sendto would block,
00226      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
00227      *
00228      *  @param handle   Socket handle
00229      *  @param address  The SocketAddress of the remote host
00230      *  @param data     Buffer of data to send to the host
00231      *  @param size     Size of the buffer in bytes
00232      *  @return         Number of sent bytes on success, negative error
00233      *                  code on failure
00234      */
00235     virtual nsapi_size_or_error_t socket_sendto(nsapi_socket_t handle, const SocketAddress &address,
00236             const void *data, nsapi_size_t size) = 0;
00237 
00238     /** Receive a packet over a UDP socket
00239      *
00240      *  Receives data and stores the source address in address if address
00241      *  is not NULL. Returns the number of bytes received into the buffer.
00242      *
00243      *  This call is non-blocking. If recvfrom would block,
00244      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
00245      *
00246      *  @param handle   Socket handle
00247      *  @param address  Destination for the source address or NULL
00248      *  @param buffer   Destination buffer for data received from the host
00249      *  @param size     Size of the buffer in bytes
00250      *  @return         Number of received bytes on success, negative error
00251      *                  code on failure
00252      */
00253     virtual nsapi_size_or_error_t socket_recvfrom(nsapi_socket_t handle, SocketAddress *address,
00254             void *buffer, nsapi_size_t size) = 0;
00255 
00256     /** Register a callback on state change of the socket
00257      *
00258      *  The specified callback will be called on state changes such as when
00259      *  the socket can recv/send/accept successfully and on when an error
00260      *  occurs. The callback may also be called spuriously without reason.
00261      *
00262      *  The callback may be called in an interrupt context and should not
00263      *  perform expensive operations such as recv/send calls.
00264      *
00265      *  @param handle   Socket handle
00266      *  @param callback Function to call on state change
00267      *  @param data     Argument to pass to callback
00268      */
00269     virtual void socket_attach(nsapi_socket_t handle, void (*callback)(void *), void *data) = 0;
00270 
00271     /*  Set stack-specific socket options
00272      *
00273      *  The setsockopt allow an application to pass stack-specific hints
00274      *  to the underlying stack. For unsupported options,
00275      *  NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
00276      *
00277      *  @param handle   Socket handle
00278      *  @param level    Stack-specific protocol level
00279      *  @param optname  Stack-specific option identifier
00280      *  @param optval   Option value
00281      *  @param optlen   Length of the option value
00282      *  @return         0 on success, negative error code on failure
00283      */
00284     virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level,
00285             int optname, const void *optval, unsigned optlen);
00286 
00287     /*  Get stack-specific socket options
00288      *
00289      *  The getstackopt allow an application to retrieve stack-specific hints
00290      *  from the underlying stack. For unsupported options,
00291      *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
00292      *
00293      *  @param handle   Socket handle
00294      *  @param level    Stack-specific protocol level
00295      *  @param optname  Stack-specific option identifier
00296      *  @param optval   Destination for option value
00297      *  @param optlen   Length of the option value
00298      *  @return         0 on success, negative error code on failure
00299      */
00300     virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level,
00301             int optname, void *optval, unsigned *optlen);
00302 };
00303 
00304 
00305 /** Convert a raw nsapi_stack_t object into a C++ NetworkStack object
00306  *
00307  *  @param stack    Reference to an object that can be converted to a stack
00308  *                  - A raw nsapi_stack_t object
00309  *                  - A reference to a network stack
00310  *                  - A reference to a network interface
00311  *  @return         Reference to the underlying network stack
00312  */
00313 NetworkStack *nsapi_create_stack(nsapi_stack_t *stack);
00314 NetworkStack *nsapi_create_stack(NetworkStack *stack);
00315 
00316 template <typename IF>
00317 NetworkStack *nsapi_create_stack(IF *iface)
00318 {
00319     return nsapi_create_stack(static_cast<NetworkInterface *>(iface)->get_stack());
00320 }
00321 
00322 
00323 #endif