Revision 1:4e1b6bfbac98, committed 2018-10-23

Comitter:

gastonfeng

Date:

Tue Oct 23 16:04:36 2018 +0800

Parent:

0:3b83fc30bbdf

Child:

2:f032b07dbff0

Commit message:

pin

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.library.json	Tue Oct 23 16:04:36 2018 +0800
@@ -0,0 +1,40 @@
+{
+    "authors": [
+        {
+            "email": null, 
+            "url": "https://os.mbed.com/users/aluqard/", 
+            "maintainer": false, 
+            "name": "SE HUI PARK"
+        }
+    ], 
+    "description": "arduino library for mbed", 
+    "examples": [
+        "https://os.mbed.com/users/aluqard/code/Gameduino2/", 
+        "https://os.mbed.com/users/kkc/code/MemoryGame/"
+    ], 
+    "frameworks": [
+        "mbed"
+    ], 
+    "keywords": [
+        "arduino"
+    ], 
+    "name": "arduino", 
+    "platforms": [
+        "atmelsam", 
+        "freescalekinetis", 
+        "maxim32", 
+        "nordicnrf51", 
+        "nordicnrf52", 
+        "nxplpc", 
+        "siliconlabsefm32", 
+        "ststm32", 
+        "teensy", 
+        "wiznet7500"
+    ], 
+    "repository": {
+        "type": "hg", 
+        "url": "https://os.mbed.com/users/aluqard/code/arduino/"
+    }, 
+    "version": "3b83fc30bb", 
+    "id": 2171
+}
\ No newline at end of file

--- a/arduino.cpp	Fri Apr 11 07:21:59 2014 +0000
+++ b/arduino.cpp	Tue Oct 23 16:04:36 2018 +0800
@@ -61,7 +61,14 @@
     digitalRead()- TODO
     
 ******************************************************/
- 
+void *pinMode(PinName pin, uint8_t f)
+{
+    if (f == INPUT)
+        return new DigitalIn(pin);
+    else if (f == OUTPUT)
+        return new DigitalOut(pin);
+}
+
 /*****************************************************  
   Analog I/O
  

--- a/arduino.h	Fri Apr 11 07:21:59 2014 +0000
+++ b/arduino.h	Tue Oct 23 16:04:36 2018 +0800
@@ -4,7 +4,80 @@
 #include "mbed.h"
 #include "math.h"
 // Macros
- 
+//add by gastonfeng begin
+typedef enum WiringPinMode
+{
+        OUTPUT, /**< Basic digital output: when the pin is HIGH, the
+               voltage is held at +3.3v (Vcc) and when it is LOW, it
+               is pulled down to ground. */
+
+        OUTPUT_OPEN_DRAIN, /**< In open drain mode, the pin indicates
+                          "low" by accepting current flow to ground
+                          and "high" by providing increased
+                          impedance. An example use would be to
+                          connect a pin to a bus line (which is pulled
+                          up to a positive voltage by a separate
+                          supply through a large resistor). When the
+                          pin is high, not much current flows through
+                          to ground and the line stays at positive
+                          voltage; when the pin is low, the bus
+                          "drains" to ground with a small amount of
+                          current constantly flowing through the large
+                          resistor from the external supply. In this
+                          mode, no current is ever actually sourced
+                          from the pin. */
+
+        INPUT, /**< Basic digital input. The pin voltage is sampled; when
+              it is closer to 3.3v (Vcc) the pin status is high, and
+              when it is closer to 0v (ground) it is low. If no
+              external circuit is pulling the pin voltage to high or
+              low, it will tend to randomly oscillate and be very
+              sensitive to noise (e.g., a breath of air across the pin
+              might cause the state to flip). */
+
+        INPUT_ANALOG, /**< This is a special mode for when the pin will be
+                     used for analog (not digital) reads.  Enables ADC
+                     conversion to be performed on the voltage at the
+                     pin. */
+
+        INPUT_PULLUP, /**< The state of the pin in this mode is reported
+                     the same way as with INPUT, but the pin voltage
+                     is gently "pulled up" towards +3.3v. This means
+                     the state will be high unless an external device
+                     is specifically pulling the pin down to ground,
+                     in which case the "gentle" pull up will not
+                     affect the state of the input. */
+
+        INPUT_PULLDOWN, /**< The state of the pin in this mode is reported
+                       the same way as with INPUT, but the pin voltage
+                       is gently "pulled down" towards 0v. This means
+                       the state will be low unless an external device
+                       is specifically pulling the pin up to 3.3v, in
+                       which case the "gentle" pull down will not
+                       affect the state of the input. */
+
+        INPUT_FLOATING, /**< Synonym for INPUT. */
+
+        PWM, /**< This is a special mode for when the pin will be used for
+            PWM output (a special case of digital output). */
+
+        PWM_OPEN_DRAIN, /**< Like PWM, except that instead of alternating
+                       cycles of LOW and HIGH, the voltage on the pin
+                       consists of alternating cycles of LOW and
+                       floating (disconnected). */
+} WiringPinMode;
+
+// Roger Clark. Added _BV macro for AVR compatibility. As requested by @sweetlilmre and @stevestrong
+#ifndef _BV
+#define _BV(bit) (1 << (bit))
+#endif
+#define HIGH 1
+#define LOW 0
+#define digitalRead(x) x
+#define digitalWrite(a, b) a->write(b)
+void *pinMode(PinName pin, uint8_t f);
+//gastonfeng end
+
 #define PI 3.1415926535897932384626433832795
 #define HALF_PI 1.5707963267948966192313216916398
 #define TWO_PI 6.283185307179586476925286766559

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/library.json	Tue Oct 23 16:04:36 2018 +0800
@@ -0,0 +1,19 @@
+{
+    "authors": {
+        "name": "SE HUI PARK",
+        "url": "https://os.mbed.com/users/aluqard/"
+    },
+    "description": "arduino library for mbed",
+    "examples": [
+        "https://os.mbed.com/users/aluqard/code/Gameduino2/",
+        "https://os.mbed.com/users/kkc/code/MemoryGame/"
+    ],
+    "frameworks": "mbed",
+    "keywords": "arduino",
+    "name": "arduino",
+    "platforms": "*",
+    "repository": {
+        "type": "hg",
+        "url": "https://os.mbed.com/users/aluqard/code/arduino/"
+    }
+}
\ No newline at end of file