Gary Servin / ros_lib_melodic

ROS Serial library for Mbed platforms for ROS Melodic Morenia. Check http://wiki.ros.org/rosserial_mbed/ for more information.

Dependencies:   BufferedSerial

Dependents:   rosserial_mbed_hello_world_publisher_melodic Motortest Nucleo_vr_servo_project NucleoFM ... more

ROSSerial_mbed for Melodic Distribution

The Robot Operating System (ROS) is a flexible framework for writing robot software. It is a collection of tools, libraries, and conventions that aim to simplify the task of creating complex and robust robot behavior across a wide variety of robotic platforms.

The rosserial_mbed package allows to write ROS nodes on any mbed enabled devices and have them connected to a running ROS system on your computer using the serial port.

Hello World (example publisher)

Import programrosserial_mbed_hello_world_publisher_melodic

rosserial_mbed Hello World example for Melodic Morenia distribution

Last commit 08 Nov 2019 by Gary Servin

Running the Code

Now, launch the roscore in a new terminal window:

Quote:

$ roscore

Next, run the rosserial client application that forwards your MBED messages to the rest of ROS. Make sure to use the correct serial port:

Quote:

$ rosrun rosserial_python serial_node.py /dev/ttyACM0

Finally, watch the greetings come in from your MBED by launching a new terminal window and entering :

Quote:

$ rostopic echo chatter

See Also

More examples

Blink

/*
 * rosserial Subscriber Example
 * Blinks an LED on callback
 */
#include "mbed.h"
#include <ros.h>
#include <std_msgs/Empty.h>

ros::NodeHandle nh;
DigitalOut myled(LED1);

void messageCb(const std_msgs::Empty& toggle_msg){
    myled = !myled;   // blink the led
}

ros::Subscriber<std_msgs::Empty> sub("toggle_led", &messageCb);

int main() {
    nh.initNode();
    nh.subscribe(sub);

    while (1) {
        nh.spinOnce();
        wait_ms(1);
    }
}

Push

/*
 * Button Example for Rosserial
 */

#include "mbed.h"
#include <ros.h>
#include <std_msgs/Bool.h>

PinName button = p20;

ros::NodeHandle nh;

std_msgs::Bool pushed_msg;
ros::Publisher pub_button("pushed", &pushed_msg);

DigitalIn button_pin(button);
DigitalOut led_pin(LED1);

bool last_reading;
long last_debounce_time=0;
long debounce_delay=50;
bool published = true;

Timer t;
int main() {
    t.start();
    nh.initNode();
    nh.advertise(pub_button);

    //Enable the pullup resistor on the button
    button_pin.mode(PullUp);

    //The button is a normally button
    last_reading = ! button_pin;

    while (1) {
        bool reading = ! button_pin;

        if (last_reading!= reading) {
            last_debounce_time = t.read_ms();
            published = false;
        }

        //if the button value has not changed for the debounce delay, we know its stable
        if ( !published && (t.read_ms() - last_debounce_time)  > debounce_delay) {
            led_pin = reading;
            pushed_msg.data = reading;
            pub_button.publish(&pushed_msg);
            published = true;
        }

        last_reading = reading;

        nh.spinOnce();
    }
}

gazebo_msgs/SpawnModel.h

Committer:
Gary Servin
Date:
2019-11-08
Revision:
1:da82487f547e
Parent:
0:04ac6be8229a

File content as of revision 1:da82487f547e:

#ifndef _ROS_SERVICE_SpawnModel_h
#define _ROS_SERVICE_SpawnModel_h
#include <stdint.h>
#include <string.h>
#include <stdlib.h>
#include "ros/msg.h"
#include "geometry_msgs/Pose.h"

namespace gazebo_msgs
{

static const char SPAWNMODEL[] = "gazebo_msgs/SpawnModel";

  class SpawnModelRequest : public ros::Msg
  {
    public:
      typedef const char* _model_name_type;
      _model_name_type model_name;
      typedef const char* _model_xml_type;
      _model_xml_type model_xml;
      typedef const char* _robot_namespace_type;
      _robot_namespace_type robot_namespace;
      typedef geometry_msgs::Pose _initial_pose_type;
      _initial_pose_type initial_pose;
      typedef const char* _reference_frame_type;
      _reference_frame_type reference_frame;

    SpawnModelRequest():
      model_name(""),
      model_xml(""),
      robot_namespace(""),
      initial_pose(),
      reference_frame("")
    {
    }

    virtual int serialize(unsigned char *outbuffer) const
    {
      int offset = 0;
      uint32_t length_model_name = strlen(this->model_name);
      varToArr(outbuffer + offset, length_model_name);
      offset += 4;
      memcpy(outbuffer + offset, this->model_name, length_model_name);
      offset += length_model_name;
      uint32_t length_model_xml = strlen(this->model_xml);
      varToArr(outbuffer + offset, length_model_xml);
      offset += 4;
      memcpy(outbuffer + offset, this->model_xml, length_model_xml);
      offset += length_model_xml;
      uint32_t length_robot_namespace = strlen(this->robot_namespace);
      varToArr(outbuffer + offset, length_robot_namespace);
      offset += 4;
      memcpy(outbuffer + offset, this->robot_namespace, length_robot_namespace);
      offset += length_robot_namespace;
      offset += this->initial_pose.serialize(outbuffer + offset);
      uint32_t length_reference_frame = strlen(this->reference_frame);
      varToArr(outbuffer + offset, length_reference_frame);
      offset += 4;
      memcpy(outbuffer + offset, this->reference_frame, length_reference_frame);
      offset += length_reference_frame;
      return offset;
    }

    virtual int deserialize(unsigned char *inbuffer)
    {
      int offset = 0;
      uint32_t length_model_name;
      arrToVar(length_model_name, (inbuffer + offset));
      offset += 4;
      for(unsigned int k= offset; k< offset+length_model_name; ++k){
          inbuffer[k-1]=inbuffer[k];
      }
      inbuffer[offset+length_model_name-1]=0;
      this->model_name = (char *)(inbuffer + offset-1);
      offset += length_model_name;
      uint32_t length_model_xml;
      arrToVar(length_model_xml, (inbuffer + offset));
      offset += 4;
      for(unsigned int k= offset; k< offset+length_model_xml; ++k){
          inbuffer[k-1]=inbuffer[k];
      }
      inbuffer[offset+length_model_xml-1]=0;
      this->model_xml = (char *)(inbuffer + offset-1);
      offset += length_model_xml;
      uint32_t length_robot_namespace;
      arrToVar(length_robot_namespace, (inbuffer + offset));
      offset += 4;
      for(unsigned int k= offset; k< offset+length_robot_namespace; ++k){
          inbuffer[k-1]=inbuffer[k];
      }
      inbuffer[offset+length_robot_namespace-1]=0;
      this->robot_namespace = (char *)(inbuffer + offset-1);
      offset += length_robot_namespace;
      offset += this->initial_pose.deserialize(inbuffer + offset);
      uint32_t length_reference_frame;
      arrToVar(length_reference_frame, (inbuffer + offset));
      offset += 4;
      for(unsigned int k= offset; k< offset+length_reference_frame; ++k){
          inbuffer[k-1]=inbuffer[k];
      }
      inbuffer[offset+length_reference_frame-1]=0;
      this->reference_frame = (char *)(inbuffer + offset-1);
      offset += length_reference_frame;
     return offset;
    }

    const char * getType(){ return SPAWNMODEL; };
    const char * getMD5(){ return "6d0eba5753761cd57e6263a056b79930"; };

  };

  class SpawnModelResponse : public ros::Msg
  {
    public:
      typedef bool _success_type;
      _success_type success;
      typedef const char* _status_message_type;
      _status_message_type status_message;

    SpawnModelResponse():
      success(0),
      status_message("")
    {
    }

    virtual int serialize(unsigned char *outbuffer) const
    {
      int offset = 0;
      union {
        bool real;
        uint8_t base;
      } u_success;
      u_success.real = this->success;
      *(outbuffer + offset + 0) = (u_success.base >> (8 * 0)) & 0xFF;
      offset += sizeof(this->success);
      uint32_t length_status_message = strlen(this->status_message);
      varToArr(outbuffer + offset, length_status_message);
      offset += 4;
      memcpy(outbuffer + offset, this->status_message, length_status_message);
      offset += length_status_message;
      return offset;
    }

    virtual int deserialize(unsigned char *inbuffer)
    {
      int offset = 0;
      union {
        bool real;
        uint8_t base;
      } u_success;
      u_success.base = 0;
      u_success.base |= ((uint8_t) (*(inbuffer + offset + 0))) << (8 * 0);
      this->success = u_success.real;
      offset += sizeof(this->success);
      uint32_t length_status_message;
      arrToVar(length_status_message, (inbuffer + offset));
      offset += 4;
      for(unsigned int k= offset; k< offset+length_status_message; ++k){
          inbuffer[k-1]=inbuffer[k];
      }
      inbuffer[offset+length_status_message-1]=0;
      this->status_message = (char *)(inbuffer + offset-1);
      offset += length_status_message;
     return offset;
    }

    const char * getType(){ return SPAWNMODEL; };
    const char * getMD5(){ return "2ec6f3eff0161f4257b808b12bc830c2"; };

  };

  class SpawnModel {
    public:
    typedef SpawnModelRequest Request;
    typedef SpawnModelResponse Response;
  };

}
#endif