Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of mbed-src by
targets/hal/TARGET_Freescale/TARGET_KLXX/rtc_api.c
- Committer:
- fwndz
- Date:
- 2016-12-21
- Revision:
- 636:de8f3520e5c1
- Parent:
- 587:61103edf8a92
File content as of revision 636:de8f3520e5c1:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "rtc_api.h" #include "PeripheralPins.h" #include "clk_freqs.h" static void init(void) { // enable RTC clock SIM->SCGC6 |= SIM_SCGC6_RTC_MASK; // select RTC clock source SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK; // Enable external crystal source if clock source is 32KHz if (extosc_frequency()==32768) { SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(OSC32KCLK); } else{ // If main clock is NOT 32KHz crystal, use external 32KHz clock source defined in PeripheralPins.c SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(PinMap_RTC[0].peripheral); pinmap_pinout(PinMap_RTC[0].pin, PinMap_RTC); //Map RTC clk input (if not NC) } } void rtc_init(void) { init(); //Configure the TSR. default value: 1 RTC->TSR = 1; if (PinMap_RTC[0].pin == NC) { //Use OSC32K RTC->CR |= RTC_CR_OSCE_MASK; //delay for OSCE stabilization for(int i=0; i<0x1000; i++) __NOP(); } // enable counter RTC->SR |= RTC_SR_TCE_MASK; } void rtc_free(void) { // [TODO] } /* * Little check routine to see if the RTC has been enabled * 0 = Disabled, 1 = Enabled */ int rtc_isenabled(void) { // even if the RTC module is enabled, // as we use RTC_CLKIN and an external clock, // we need to reconfigure the pins. That is why we // call init() if the rtc is enabled // if RTC not enabled return 0 SIM->SCGC5 |= SIM_SCGC5_PORTA_MASK; SIM->SCGC6 |= SIM_SCGC6_RTC_MASK; if ((RTC->SR & RTC_SR_TCE_MASK) == 0) return 0; init(); return 1; } time_t rtc_read(void) { return RTC->TSR; } void rtc_write(time_t t) { // disable counter RTC->SR &= ~RTC_SR_TCE_MASK; // we do not write 0 into TSR // to avoid invalid time if (t == 0) t = 1; // write seconds RTC->TSR = t; // re-enable counter RTC->SR |= RTC_SR_TCE_MASK; }