Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_pcd_ex.c

Revision:

144:ef7eb2e8f9f7

Parent:

0:9b334a45a8ff

--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_pcd_ex.c	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_pcd_ex.c	Fri Sep 02 15:07:44 2016 +0100
@@ -1,156 +1,156 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_pcd_ex.c
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    26-June-2015
-  * @brief   Extended PCD HAL module driver.
-  *          This file provides firmware functions to manage the following 
-  *          functionalities of the USB Peripheral Controller:
-  *           + Configuration of the PMA for EP
-  *         
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
-
-/** @defgroup PCDEx PCDEx
-  * @brief PCD Extended HAL module driver
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
-/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
-  * @{
-  */
-
-/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
-  * @brief    PCDEx control functions 
-  *
-@verbatim
- ===============================================================================
-              ##### Extended Peripheral Control functions #####
- ===============================================================================
-    [..]  This section provides functions allowing to:
-      (+) Update PMA configuration
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief Configure PMA for EP
-  * @param  hpcd: PCD handle
-  * @param  ep_addr: endpoint address
-  * @param  ep_kind: endpoint Kind
-  *                @arg USB_SNG_BUF: Single Buffer used
-  *                @arg USB_DBL_BUF: Double Buffer used
-  * @param  pmaadress: EP address in The PMA: In case of single buffer endpoint
-  *                   this parameter is 16-bit value providing the address
-  *                   in PMA allocated to endpoint.
-  *                   In case of double buffer endpoint this parameter
-  *                   is a 32-bit value providing the endpoint buffer 0 address
-  *                   in the LSB part of 32-bit value and endpoint buffer 1 address
-  *                   in the MSB part of 32-bit value.
-  * @retval : status
-  */
-
-HAL_StatusTypeDef  HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, 
-                        uint16_t ep_addr,
-                        uint16_t ep_kind,
-                        uint32_t pmaadress)
-
-{
-  PCD_EPTypeDef *ep;
-  
-  /* initialize ep structure*/
-  if ((0x80 & ep_addr) == 0x80)
-  {
-    ep = &hpcd->IN_ep[ep_addr & 0x7F];
-  }
-  else
-  {
-    ep = &hpcd->OUT_ep[ep_addr];
-  }
-  
-  /* Here we check if the endpoint is single or double Buffer*/
-  if (ep_kind == PCD_SNG_BUF)
-  {
-    /*Single Buffer*/
-    ep->doublebuffer = 0;
-    /*Configure the PMA*/
-    ep->pmaadress = (uint16_t)pmaadress;
-  }
-  else /*USB_DBL_BUF*/
-  {
-    /*Double Buffer Endpoint*/
-    ep->doublebuffer = 1;
-    /*Configure the PMA*/
-    ep->pmaaddr0 =  pmaadress & 0xFFFF;
-    ep->pmaaddr1 =  (pmaadress & 0xFFFF0000) >> 16;
-  }
-  
-  return HAL_OK;
-}
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_pcd_ex.c
+  * @author  MCD Application Team
+  * @version V1.4.0
+  * @date    27-May-2016
+  * @brief   Extended PCD HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the USB Peripheral Controller:
+  *           + Configuration of the PMA for EP
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCDEx PCDEx
+  * @brief PCD Extended HAL module driver
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @brief    PCDEx control functions 
+  *
+@verbatim
+ ===============================================================================
+              ##### Extended Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Update PMA configuration
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Configure PMA for EP
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  ep_kind: endpoint Kind
+  *                @arg USB_SNG_BUF: Single Buffer used
+  *                @arg USB_DBL_BUF: Double Buffer used
+  * @param  pmaadress: EP address in The PMA: In case of single buffer endpoint
+  *                   this parameter is 16-bit value providing the address
+  *                   in PMA allocated to endpoint.
+  *                   In case of double buffer endpoint this parameter
+  *                   is a 32-bit value providing the endpoint buffer 0 address
+  *                   in the LSB part of 32-bit value and endpoint buffer 1 address
+  *                   in the MSB part of 32-bit value.
+  * @retval : status
+  */
+
+HAL_StatusTypeDef  HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, 
+                        uint16_t ep_addr,
+                        uint16_t ep_kind,
+                        uint32_t pmaadress)
+
+{
+  PCD_EPTypeDef *ep;
+  
+  /* initialize ep structure*/
+  if ((0x80 & ep_addr) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr];
+  }
+  
+  /* Here we check if the endpoint is single or double Buffer*/
+  if (ep_kind == PCD_SNG_BUF)
+  {
+    /*Single Buffer*/
+    ep->doublebuffer = 0;
+    /*Configure the PMA*/
+    ep->pmaadress = (uint16_t)pmaadress;
+  }
+  else /*USB_DBL_BUF*/
+  {
+    /*Double Buffer Endpoint*/
+    ep->doublebuffer = 1;
+    /*Configure the PMA*/
+    ep->pmaaddr0 =  pmaadress & 0xFFFF;
+    ep->pmaaddr1 =  (pmaadress & 0xFFFF0000U) >> 16;
+  }
+  
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/