Diff: targets/hal/TARGET_WIZNET/TARGET_W7500x/gpio_irq_api.c

Revision:

144:ef7eb2e8f9f7

Parent:

0:9b334a45a8ff

--- a/targets/hal/TARGET_WIZNET/TARGET_W7500x/gpio_irq_api.c	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_WIZNET/TARGET_W7500x/gpio_irq_api.c	Fri Sep 02 15:07:44 2016 +0100
@@ -1,175 +1,175 @@
-/* mbed Microcontroller Library 
- *******************************************************************************
- * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of ARM Limited nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-static gpio_irq_handler irq_handler;
-
-static uint32_t channel_ids[4][16];
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-void port_generic_handler(GPIO_TypeDef* GPIOx, uint32_t port_num);
- 
-void PORT0_Handler(void)
-{
-    port_generic_handler(GPIOA, 0);
-}
-
-void PORT1_Handler(void)
-{
-    port_generic_handler(GPIOB, 1);
-}
-
-void PORT2_Handler(void)
-{
-    port_generic_handler(GPIOC, 2);
-}
-
-void PORT3_Handler(void)
-{
-    port_generic_handler(GPIOD, 3);
-}
-
-void port_generic_handler(GPIO_TypeDef* GPIOx, uint32_t port_num)
-{
-    int i = 0;
-    int loop = 16;
-
-    if(GPIOx == GPIOD) loop = 5;
-    
-    for(i=0; i<loop; i++)
-    {
-        if(GPIOx->Interrupt.INTSTATUS & (1 << i))
-        {
-            GPIOx->Interrupt.INTCLEAR |= (1 << i);
-            if(GPIOx->INTPOLSET >> i) //rising
-                irq_handler(channel_ids[port_num][i], IRQ_RISE);
-            else //falling
-                irq_handler(channel_ids[port_num][i], IRQ_FALL);
-        }
-    }
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{   
-    obj->port_num = WIZ_PORT(pin);
-    obj->pin_num = WIZ_PIN_NUM(pin);
-    obj->pin_index  = WIZ_PIN_INDEX(pin);
-    
-    if (pin == NC) return -1;
-    
-    if(obj->port_num == 0)
-        obj->irq_n = PORT0_IRQn;
-    else if(obj->port_num == 1)
-        obj->irq_n = PORT1_IRQn;
-    else if(obj->port_num == 2)
-        obj->irq_n = PORT2_IRQn;
-    else
-        obj->irq_n = PORT3_IRQn;
-    
-    //obj->event = EDGE_FALL;
-    obj->pin = pin;
-    
-    // Enable EXTI interrupt    
-    NVIC_EnableIRQ(obj->irq_n);
-
-    channel_ids[obj->port_num][obj->pin_num] = id;
-    
-    irq_handler = handler;
-    
-    return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
-    channel_ids[obj->port_num][obj->pin_num] = 0;
-        
-    obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
-    GPIO_TypeDef *gpio = (GPIO_TypeDef *)Get_GPIO_BaseAddress(obj->port_num);
-    
-    if (enable) {
-        if (event == IRQ_RISE) {
-            gpio->INTPOLSET |= obj->pin_index;
-            obj->event = EDGE_RISE;
-            obj->rise_null = 0;
-        }
-        else if (event == IRQ_FALL) {
-            gpio->INTPOLSET &= ~obj->pin_index;
-            obj->event = EDGE_FALL;
-            obj->fall_null = 0;
-        }
-        gpio->INTTYPESET |= obj->pin_index;
-        gpio->INTENSET |= obj->pin_index;
-        
-        
-    } else {
-        if (event == IRQ_RISE) {
-            obj->rise_null = 1;
-            if(obj->fall_null)
-                gpio->INTENCLR |= obj->pin_index;
-        }
-        else if (event == IRQ_FALL) {
-            obj->fall_null = 1;
-            if(obj->rise_null)
-                gpio->INTENCLR |= obj->pin_index;
-        }
-    }
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
-    NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
-    NVIC_DisableIRQ(obj->irq_n);
-    obj->event = EDGE_NONE;
-}
+/* mbed Microcontroller Library 
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+static gpio_irq_handler irq_handler;
+
+static uint32_t channel_ids[4][16];
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+void port_generic_handler(GPIO_TypeDef* GPIOx, uint32_t port_num);
+ 
+void PORT0_Handler(void)
+{
+    port_generic_handler(GPIOA, 0);
+}
+
+void PORT1_Handler(void)
+{
+    port_generic_handler(GPIOB, 1);
+}
+
+void PORT2_Handler(void)
+{
+    port_generic_handler(GPIOC, 2);
+}
+
+void PORT3_Handler(void)
+{
+    port_generic_handler(GPIOD, 3);
+}
+
+void port_generic_handler(GPIO_TypeDef* GPIOx, uint32_t port_num)
+{
+    int i = 0;
+    int loop = 16;
+
+    if(GPIOx == GPIOD) loop = 5;
+    
+    for(i=0; i<loop; i++)
+    {
+        if(GPIOx->Interrupt.INTSTATUS & (1 << i))
+        {
+            GPIOx->Interrupt.INTCLEAR |= (1 << i);
+            if(GPIOx->INTPOLSET >> i) //rising
+                irq_handler(channel_ids[port_num][i], IRQ_RISE);
+            else //falling
+                irq_handler(channel_ids[port_num][i], IRQ_FALL);
+        }
+    }
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{   
+    obj->port_num = WIZ_PORT(pin);
+    obj->pin_num = WIZ_PIN_NUM(pin);
+    obj->pin_index  = WIZ_PIN_INDEX(pin);
+    
+    if (pin == NC) return -1;
+    
+    if(obj->port_num == 0)
+        obj->irq_n = PORT0_IRQn;
+    else if(obj->port_num == 1)
+        obj->irq_n = PORT1_IRQn;
+    else if(obj->port_num == 2)
+        obj->irq_n = PORT2_IRQn;
+    else
+        obj->irq_n = PORT3_IRQn;
+    
+    //obj->event = EDGE_FALL;
+    obj->pin = pin;
+    
+    // Enable EXTI interrupt    
+    NVIC_EnableIRQ(obj->irq_n);
+
+    channel_ids[obj->port_num][obj->pin_num] = id;
+    
+    irq_handler = handler;
+    
+    return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+    channel_ids[obj->port_num][obj->pin_num] = 0;
+        
+    obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+    GPIO_TypeDef *gpio = (GPIO_TypeDef *)Get_GPIO_BaseAddress(obj->port_num);
+    
+    if (enable) {
+        if (event == IRQ_RISE) {
+            gpio->INTPOLSET |= obj->pin_index;
+            obj->event = EDGE_RISE;
+            obj->rise_null = 0;
+        }
+        else if (event == IRQ_FALL) {
+            gpio->INTPOLSET &= ~obj->pin_index;
+            obj->event = EDGE_FALL;
+            obj->fall_null = 0;
+        }
+        gpio->INTTYPESET |= obj->pin_index;
+        gpio->INTENSET |= obj->pin_index;
+        
+        
+    } else {
+        if (event == IRQ_RISE) {
+            obj->rise_null = 1;
+            if(obj->fall_null)
+                gpio->INTENCLR |= obj->pin_index;
+        }
+        else if (event == IRQ_FALL) {
+            obj->fall_null = 1;
+            if(obj->rise_null)
+                gpio->INTENCLR |= obj->pin_index;
+        }
+    }
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+    NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+    NVIC_DisableIRQ(obj->irq_n);
+    obj->event = EDGE_NONE;
+}