Fawwaz Nadzmy
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32WG_STK3800/PeripheralPins.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32WG_STK3800/PeripheralPins.c Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32WG_STK3800/PeripheralPins.c Fri Sep 02 15:07:44 2016 +0100
@@ -1,234 +1,233 @@
-/***************************************************************************//**
- * @file PeripheralPins.c
- *******************************************************************************
- * @section License
- * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
- *******************************************************************************
- *
- * Permission is granted to anyone to use this software for any purpose,
- * including commercial applications, and to alter it and redistribute it
- * freely, subject to the following restrictions:
- *
- * 1. The origin of this software must not be misrepresented; you must not
- * claim that you wrote the original software.
- * 2. Altered source versions must be plainly marked as such, and must not be
- * misrepresented as being the original software.
- * 3. This notice may not be removed or altered from any source distribution.
- *
- * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no
- * obligation to support this Software. Silicon Labs is providing the
- * Software "AS IS", with no express or implied warranties of any kind,
- * including, but not limited to, any implied warranties of merchantability
- * or fitness for any particular purpose or warranties against infringement
- * of any proprietary rights of a third party.
- *
- * Silicon Labs will not be liable for any consequential, incidental, or
- * special damages, or any other relief, or for any claim by any third party,
- * arising from your use of this Software.
- *
- ******************************************************************************/
-
-#include "PeripheralPins.h"
-
-/************ADC***************/
-/* The third "function" value is used to select the correct ADC channel */
-const PinMap PinMap_ADC[] = {
- {PD0, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH0},
- {PD1, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH1},
- {PD2, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH2},
- {PD3, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH3},
- {PD4, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH4},
- {PD5, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH5},
- {PD6, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH6},
- {PD7, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH7},
- {NC , NC , NC}
-};
-
-/************DAC***************/
-const PinMap PinMap_DAC[] = {
- {PB11, DAC_0, 0},
- {PB12, DAC_0, 1},
- {NC , NC , NC}
-};
-
-/************I2C SCL***********/
-const PinMap PinMap_I2C_SCL[] = {
- /* I2C0 */
- {PA1, I2C_0, 0},
- {PD7, I2C_0, 1},
- {PC7, I2C_0, 2},
- {PD15, I2C_0, 3},
- {PC1, I2C_0, 4},
- {PF1, I2C_0, 5},
- {PE13, I2C_0, 6},
-
- /* I2C1 */
- {PC5, I2C_1, 0},
- {PB12, I2C_1, 1},
- {PE1, I2C_1, 2},
-
- /* Not connected */
- {NC , NC , NC}
-};
-
-/************I2C SDA***********/
-const PinMap PinMap_I2C_SDA[] = {
- /* I2C0 */
- {PA0, I2C_0, 0},
- {PD6, I2C_0, 1},
- {PC6, I2C_0, 2},
- {PD14, I2C_0, 3},
- {PC0, I2C_0, 4},
- {PF0, I2C_0, 5},
- {PE12, I2C_0, 6},
-
- /* I2C1 */
- {PC4, I2C_1, 0},
- {PB11, I2C_1, 1},
- {PE0, I2C_1, 2},
-
- /* Not connected */
- {NC , NC , NC}
-};
-
-/************PWM***************/
-const PinMap PinMap_PWM[] = {
- {PA12, PWM_CH0, 0},
- {PA13, PWM_CH1, 0},
- {PA14, PWM_CH2, 0},
- {NC , NC , 0}
-};
-
-/*************SPI**************/
-const PinMap PinMap_SPI_MOSI[] = {
- /* USART0 */
- {PE10, SPI_0, 0},
- {PE7, SPI_0, 1},
- {PC11, SPI_0, 2},
- {PC0, SPI_0, 5},
- /* USART1 */
- {PD0, SPI_1, 1},
- {PD7, SPI_1, 2},
- /* USART2 */
- {PC2, SPI_2, 0},
- {PB3, SPI_2, 1},
- /* Not connected */
- {NC , NC , NC}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- /* USART0 */
- {PE11, SPI_0, 0},
- {PE6, SPI_0, 1},
- {PC10, SPI_0, 2},
- {PC1, SPI_0, 5},
- /* USART1 */
- {PD1, SPI_1, 1},
- {PD6, SPI_1, 2},
- /* USART2 */
- {PC3, SPI_2, 0},
- {PB4, SPI_2, 1},
- /* Not connected */
- {NC , NC , NC}
-};
-
-const PinMap PinMap_SPI_CLK[] = {
- /* USART0 */
- {PE12, SPI_0, 0},
- {PE5, SPI_0, 1},
- {PC9, SPI_0, 2},
- {PB13, SPI_0, 5},
- /* USART1 */
- {PD2, SPI_1, 1},
- {PF0, SPI_1, 2},
- /* USART2 */
- {PC4, SPI_2, 0},
- {PB5, SPI_2, 1},
- /* Not connected */
- {NC , NC , NC}
-};
-
-const PinMap PinMap_SPI_CS[] = {
- /* USART0 */
- {PE13, SPI_0, 0},
- {PE4, SPI_0, 1},
- {PC8, SPI_0, 2},
- {PB14, SPI_0, 5},
- /* USART1 */
- {PD3, SPI_1, 1},
- {PF1, SPI_1, 2},
- /* USART2 */
- {PC5, SPI_2, 0},
- {PB6, SPI_2, 1},
- /* Not connected */
- {NC , NC , NC}
-};
-
-/************UART**************/
-const PinMap PinMap_UART_TX[] = {
- /* UART0 */
- {PF6, UART_0, 0},
- {PE0, UART_0, 1},
- /* UART1 */
- {PF10, UART_1, 1},
- {PB9, UART_1, 2},
- {PE2, UART_1, 3},
- /* USART0 */
- {PE10, USART_0, 0},
- {PE7, USART_0, 1},
- {PC11, USART_0, 2},
- {PE13, USART_0, 3},
- {PB7, USART_0, 4},
- /* USART1 */
- {PC0, USART_1, 0},
- {PD0, USART_1, 1},
- {PD7, USART_1, 2},
- /* USART2 */
- {PC2, USART_2, 0},
- {PB3, USART_2, 1},
- /* LEUART0 */
- {PD4, LEUART_0, 0},
- {PB13, LEUART_0, 1},
- {PE14, LEUART_0, 2},
- {PF0, LEUART_0, 3},
- {PF2, LEUART_0, 4},
- /* LEUART1 */
- {PC6, LEUART_1, 0},
- {PA5, LEUART_1, 1},
- /* Not connected */
- {NC , NC , NC}
-};
-
-const PinMap PinMap_UART_RX[] = {
- /* UART0 */
- {PF7, UART_0, 0},
- {PE1, UART_0, 1},
- /* UART1 */
- {PF11, UART_1, 1},
- {PB10, UART_1, 2},
- {PE3, UART_1, 3},
- /* USART0 */
- {PE11, USART_0, 0},
- {PE6, USART_0, 1},
- {PC10, USART_0, 2},
- {PE12, USART_0, 3},
- {PB8, USART_0, 4},
- /* USART1 */
- {PC1, USART_1, 0},
- {PD1, USART_1, 1},
- {PD6, USART_1, 2},
- /* USART2 */
- {PC3, USART_2, 0},
- {PB4, USART_2, 1},
- /* LEUART0 */
- {PD5, LEUART_0, 0},
- {PB14, LEUART_0, 1},
- {PE15, LEUART_0, 2},
- {PF1, LEUART_0, 3},
- {PA0, LEUART_0, 4},
- /* LEUART1 */
- {PC7, LEUART_1, 0},
- {PA6, LEUART_1, 1},
- /* Not connected */
- {NC , NC , NC}
-};
+/***************************************************************************//**
+ * @file PeripheralPins.c
+ *******************************************************************************
+ * @section License
+ * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "PeripheralPins.h"
+
+/************ADC***************/
+/* The third "function" value is used to select the correct ADC channel */
+const PinMap PinMap_ADC[] = {
+ {PD0, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH0},
+ {PD1, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH1},
+ {PD2, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH2},
+ {PD3, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH3},
+ {PD4, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH4},
+ {PD5, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH5},
+ {PD6, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH6},
+ {PD7, ADC_0, ADC_SINGLECTRL_INPUTSEL_CH7},
+ {NC , NC , NC}
+};
+
+/************DAC***************/
+const PinMap PinMap_DAC[] = {
+ {PB11, DAC_0, 0},
+ {PB12, DAC_0, 1},
+ {NC , NC , NC}
+};
+
+/************I2C SCL***********/
+const PinMap PinMap_I2C_SCL[] = {
+ /* I2C0 */
+ {PA1, I2C_0, 0},
+ {PD7, I2C_0, 1},
+ {PC7, I2C_0, 2},
+ {PD15, I2C_0, 3},
+ {PC1, I2C_0, 4},
+ {PF1, I2C_0, 5},
+ {PE13, I2C_0, 6},
+
+ /* I2C1 */
+ {PC5, I2C_1, 0},
+ {PB12, I2C_1, 1},
+ {PE1, I2C_1, 2},
+
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+/************I2C SDA***********/
+const PinMap PinMap_I2C_SDA[] = {
+ /* I2C0 */
+ {PA0, I2C_0, 0},
+ {PD6, I2C_0, 1},
+ {PC6, I2C_0, 2},
+ {PD14, I2C_0, 3},
+ {PC0, I2C_0, 4},
+ {PF0, I2C_0, 5},
+ {PE12, I2C_0, 6},
+
+ /* I2C1 */
+ {PC4, I2C_1, 0},
+ {PB11, I2C_1, 1},
+ {PE0, I2C_1, 2},
+
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+/************PWM***************/
+const PinMap PinMap_PWM[] = {
+ {PA8, PWM_CH0, 0},
+ {PA9, PWM_CH1, 0},
+ {PA10, PWM_CH2, 0},
+ {PA12, PWM_CH0, 1},
+ {PA13, PWM_CH1, 1},
+ {PA14, PWM_CH2, 1},
+ {PC8, PWM_CH0, 2},
+ {PC9, PWM_CH1, 2},
+ {PC10, PWM_CH2, 2},
+ {NC , NC , 0}
+};
+
+/*************SPI**************/
+const PinMap PinMap_SPI_MOSI[] = {
+ /* USART0 */
+ {PE10, SPI_0, 0},
+ {PE7, SPI_0, 1},
+ {PC11, SPI_0, 2},
+ {PC0, SPI_0, 5},
+ /* USART1 */
+ {PD0, SPI_1, 1},
+ {PD7, SPI_1, 2},
+ /* USART2 */
+ {PC2, SPI_2, 0},
+ {PB3, SPI_2, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ /* USART0 */
+ {PE11, SPI_0, 0},
+ {PE6, SPI_0, 1},
+ {PC10, SPI_0, 2},
+ {PC1, SPI_0, 5},
+ /* USART1 */
+ {PD1, SPI_1, 1},
+ {PD6, SPI_1, 2},
+ /* USART2 */
+ {PC3, SPI_2, 0},
+ {PB4, SPI_2, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+const PinMap PinMap_SPI_CLK[] = {
+ /* USART0 */
+ {PE12, SPI_0, 0},
+ {PE5, SPI_0, 1},
+ {PC9, SPI_0, 2},
+ {PB13, SPI_0, 5},
+ /* USART1 */
+ {PD2, SPI_1, 1},
+ {PF0, SPI_1, 2},
+ /* USART2 */
+ {PC4, SPI_2, 0},
+ {PB5, SPI_2, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+const PinMap PinMap_SPI_CS[] = {
+ /* USART0 */
+ {PE13, SPI_0, 0},
+ {PE4, SPI_0, 1},
+ {PC8, SPI_0, 2},
+ {PB14, SPI_0, 5},
+ /* USART1 */
+ {PD3, SPI_1, 1},
+ {PF1, SPI_1, 2},
+ /* USART2 */
+ {PC5, SPI_2, 0},
+ {PB6, SPI_2, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+/************UART**************/
+const PinMap PinMap_UART_TX[] = {
+ /* UART0 */
+ {PF6, UART_0, 0},
+ {PE0, UART_0, 1},
+ /* UART1 */
+ {PF10, UART_1, 1},
+ {PB9, UART_1, 2},
+ {PE2, UART_1, 3},
+ /* USART0 */
+ {PE10, USART_0, 0},
+ {PE7, USART_0, 1},
+ {PC11, USART_0, 2},
+ {PE13, USART_0, 3},
+ {PB7, USART_0, 4},
+ /* USART1 */
+ {PC0, USART_1, 0},
+ {PD0, USART_1, 1},
+ {PD7, USART_1, 2},
+ /* USART2 */
+ {PC2, USART_2, 0},
+ {PB3, USART_2, 1},
+ /* LEUART0 */
+ {PD4, LEUART_0, 0},
+ {PB13, LEUART_0, 1},
+ {PE14, LEUART_0, 2},
+ {PF0, LEUART_0, 3},
+ {PF2, LEUART_0, 4},
+ /* LEUART1 */
+ {PC6, LEUART_1, 0},
+ {PA5, LEUART_1, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ /* UART0 */
+ {PF7, UART_0, 0},
+ {PE1, UART_0, 1},
+ /* UART1 */
+ {PF11, UART_1, 1},
+ {PB10, UART_1, 2},
+ {PE3, UART_1, 3},
+ /* USART0 */
+ {PE11, USART_0, 0},
+ {PE6, USART_0, 1},
+ {PC10, USART_0, 2},
+ {PE12, USART_0, 3},
+ {PB8, USART_0, 4},
+ /* USART1 */
+ {PC1, USART_1, 0},
+ {PD1, USART_1, 1},
+ {PD6, USART_1, 2},
+ /* USART2 */
+ {PC3, USART_2, 0},
+ {PB4, USART_2, 1},
+ /* LEUART0 */
+ {PD5, LEUART_0, 0},
+ {PB14, LEUART_0, 1},
+ {PE15, LEUART_0, 2},
+ {PF1, LEUART_0, 3},
+ {PA0, LEUART_0, 4},
+ /* LEUART1 */
+ {PC7, LEUART_1, 0},
+ {PA6, LEUART_1, 1},
+ /* Not connected */
+ {NC , NC , NC}
+};