These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
Diff: PWR/EXTINT_Sleep/extint_sleep.c
- Revision:
- 0:bf7b9fba3924
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/PWR/EXTINT_Sleep/extint_sleep.c Sun Mar 20 05:38:56 2011 +0000 @@ -0,0 +1,291 @@ +/***********************************************************************//** + * @file EXTINT_Sleep.c + * @purpose This example describes how to enter the system in sleep + * mode and wake-up by using external interrupt + * @version 2.0 + * @date 21. May. 2010 + * @author NXP MCU SW Application Team + *--------------------------------------------------------------------- + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + **********************************************************************/ +#include "LPC17xx.h" +#include "lpc17xx_gpio.h" +#include "lpc17xx_exti.h" +#include "lpc17xx_pinsel.h" +#include "lpc17xx_clkpwr.h" +#include "lpc17xx_libcfg.h" +#include "debug_frmwrk.h" + + +/* Example group ----------------------------------------------------------- */ +/** @defgroup PWR_EXTINT_Sleep EXTINT_Sleep + * @ingroup PWR_Examples + * @{ + */ + +/************************** PRIVATE DEFINITIONS *************************/ +#define MCB_LPC_1768 +//#define IAR_LPC_1768 + +#ifdef MCB_LPC_1768 +/* LED pin in byte style on P1 */ +#define _EXT_IRQ EINT0_IRQn +#define _EXTINT EXTI_EINT0 +#elif defined (IAR_LPC_1768) +#define _EXT_IRQ EINT2_IRQn +#define _EXTINT EXTI_EINT2 +#endif + +/************************** PRIVATE FUNCTIONS *************************/ +uint8_t menu[]= + "********************************************************************************\n\r" + "Hello NXP Semiconductors \n\r" + "Power control demo \n\r" + "\t - MCU: LPC17xx \n\r" + "\t - Core: ARM CORTEX-M3 \n\r" + "\t - Communicate via: UART0 - 115200 bps \n\r" + "This example used to enter system in sleep mode and wake up it by using external \n\r" + "interrupt\n\r" + "********************************************************************************\n\r"; + +/* Interrupt service routines */ +#ifdef MCB_LPC_1768 +void EINT0_IRQHandler(void); +#elif defined (IAR_LPC_1768) +void EINT2_IRQHandler(void); +#endif + +void print_menu(void); +void delay (void); +void InitLED(void); + +/*----------------- INTERRUPT SERVICE ROUTINES --------------------------*/ +#ifdef MCB_LPC_1768 +/*********************************************************************//** + * @brief External interrupt 0 handler sub-routine + * @param[in] None + * @return None + **********************************************************************/ +void EINT0_IRQHandler(void) +{ + //clear the EINT0 flag + EXTI_ClearEXTIFlag(0); + +} +#elif defined (IAR_LPC_1768) +/*********************************************************************//** + * @brief External interrupt 3 handler sub-routine + * @param[in] None + * @return None + **********************************************************************/ +void EINT2_IRQHandler(void) +{ + //clear the EINT2 flag + EXTI_ClearEXTIFlag(2); +} + +#endif + +/*-------------------------PRIVATE FUNCTIONS------------------------------*/ +/*********************************************************************//** + * @brief Print Welcome menu + * @param[in] none + * @return None + **********************************************************************/ +void print_menu(void) +{ + _DBG(menu); +} +/*********************************************************************//** + * @brief Delay function + * @param[in] None + * @return None + **********************************************************************/ +void delay (void) { + unsigned int i; + + for (i = 0; i < 0x100000; i++) { + } +} + +/*********************************************************************//** + * @brief Initialize LEDs + * @param[in] None + * @return None + **********************************************************************/ +void InitLED(void) +{ +#ifdef MCB_LPC_1768 +/* Use LEDs P1.28 and P1.29*/ + GPIO_SetDir(1, (1<<28)|(1<<29), 1); //set P1.28 and P1.29 is output + GPIO_ClearValue(1, (1<<28)|(1<<29));//Turn off LEDs +#elif defined (IAR_LPC_1768) +/* Use LED1 (P1.25) and LED2 (P0.4)*/ + GPIO_SetDir(1, (1<<25), 1); //set P1.25 is output + GPIO_SetDir(0, (1<<4), 1); //set P0.4 is output + GPIO_SetValue(1, (1<<25)); //Turn off LED1 + GPIO_SetValue(0, (1<<4)); //Turn off LED2 +#endif +} + + +/*-------------------------MAIN FUNCTION------------------------------*/ +/*********************************************************************//** + * @brief c_entry: Main program body + * @param[in] None + * @return int + **********************************************************************/ +int c_entry (void) +{ + PINSEL_CFG_Type PinCfg; + EXTI_InitTypeDef EXTICfg; + + /* Initialize debug via UART0 + * 115200bps + * 8 data bit + * No parity + * 1 stop bit + * No flow control + */ + debug_frmwrk_init(); + + // print welcome screen + print_menu(); + + /* Initialize LEDs + * - If using MCB1700 board: + * LEDs: P1.28 and P1.29 are available + * - If using IAR1700 board: + * LEDs: LED1(P1.25) and LED2(P0.4) are available + * Turn off LEDs after initialize + */ + InitLED(); + + /* Initialize EXT pin and registers + * - If using MCB1700 board: EXTI0 is configured + * - If using IAR1700 board: EXTI2 is configured + */ +#ifdef MCB_LPC_1768 + /* P2.10 as /EINT0 */ + PinCfg.Funcnum = 1; + PinCfg.OpenDrain = 0; + PinCfg.Pinmode = 0; + PinCfg.Pinnum = 10; + PinCfg.Portnum = 2; + PINSEL_ConfigPin(&PinCfg); +#elif defined (IAR_LPC_1768) + /* P2.12 as /EINT2 */ + PinCfg.Funcnum = 1; + PinCfg.OpenDrain = 0; + PinCfg.Pinmode = 0; + PinCfg.Pinnum = 12; + PinCfg.Portnum = 2; + PINSEL_ConfigPin(&PinCfg); +#endif + + EXTI_Init(); + + EXTICfg.EXTI_Line = _EXTINT; + /* edge sensitive */ + EXTICfg.EXTI_Mode = EXTI_MODE_EDGE_SENSITIVE; + EXTICfg.EXTI_polarity = EXTI_POLARITY_LOW_ACTIVE_OR_FALLING_EDGE; + EXTI_ClearEXTIFlag(_EXTINT); + EXTI_Config(&EXTICfg); + + NVIC_SetPriorityGrouping(4); + NVIC_SetPriority(_EXT_IRQ, 0); + NVIC_EnableIRQ(_EXT_IRQ); + + _DBG_("First LED is blinking in normal mode...\n\r" \ + "Press '1' to enter system in sleep mode.\n\r"\ + "If you want to wake-up the system, press INT/WAKE-UP button."); + while(_DG !='1') + { + //Blink first LED +#ifdef MCB_LPC_1768 + //blink LED P1.28 + GPIO_SetValue(1, (1<<28)); + delay(); + GPIO_ClearValue(1, (1<<28)); + delay(); +#elif defined (IAR_LPC_1768) + //blink LED1 (P1.25) + GPIO_SetValue(1, (1<<25)); + delay(); + GPIO_ClearValue(1, (1<<25)); + delay(); +#endif + } + + _DBG_("Sleeping..."); + // Enter target power down mode + CLKPWR_Sleep(); + + // MCU will be here after waking up + _DBG_("System wake-up! Second LED is blinking..."); + //turn off first LED +#ifdef MCB_LPC_1768 + GPIO_ClearValue(1, (1<<29)); +#elif defined (IAR_LPC_1768) + GPIO_SetValue(1, (1<<25)); +#endif + while (1) + { + //Blink second LED +#ifdef MCB_LPC_1768 + //blink LED P1.29 + GPIO_SetValue(1, (1<<29)); + delay(); + GPIO_ClearValue(1, (1<<29)); + delay(); +#elif defined (IAR_LPC_1768) + //blink LED2 (P0.4) + GPIO_SetValue(0, (1<<4)); + delay(); + GPIO_ClearValue(0, (1<<4)); + delay(); +#endif + } +} + + +/* With ARM and GHS toolsets, the entry point is main() - this will + allow the linker to generate wrapper code to setup stacks, allocate + heap area, and initialize and copy code and data segments. For GNU + toolsets, the entry point is through __start() in the crt0_gnu.asm + file, and that startup code will setup stacks and data */ +int main(void) +{ + return c_entry(); +} + +#ifdef DEBUG +/******************************************************************************* +* @brief Reports the name of the source file and the source line number +* where the CHECK_PARAM error has occurred. +* @param[in] file Pointer to the source file name +* @param[in] line assert_param error line source number +* @return None +*******************************************************************************/ +void check_failed(uint8_t *file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while(1); +} +#endif + +/* + * @} + */