Frank 26080115
These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
SPI/sc16is750_polling/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
| frank26080115 | 0:bf7b9fba3924 | 2 | * @file SPI\sc16is750_polling\abstract.txt |
| frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
| frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
| frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
| frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the SPI SC16IS750 Polling example. |
| frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
| frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
| frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
| frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
| frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
| frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
| frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
| frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
| frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
| frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
| frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 19 | |
| frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
| frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
| frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to use SPI in polling mode to communicate |
| frank26080115 | 0:bf7b9fba3924 | 23 | with SC16IS750/760 Demo Board. |
| frank26080115 | 0:bf7b9fba3924 | 24 | Process: |
| frank26080115 | 0:bf7b9fba3924 | 25 | SPI configuration: |
| frank26080115 | 0:bf7b9fba3924 | 26 | - CPHA = 0: data is sampled on the first clock edge of SCK. |
| frank26080115 | 0:bf7b9fba3924 | 27 | - CPOL = 0: SCK is active high |
| frank26080115 | 0:bf7b9fba3924 | 28 | - Clock rate = 1MHz |
| frank26080115 | 0:bf7b9fba3924 | 29 | - LSBF = 0: SPI data is transferred MSB first |
| frank26080115 | 0:bf7b9fba3924 | 30 | - BITS = 8: 8 bits per transfer |
| frank26080115 | 0:bf7b9fba3924 | 31 | - MSTR = 1: SPI operates in Master mode |
| frank26080115 | 0:bf7b9fba3924 | 32 | SPI send commands to reset, config and handle communication with SC16IS740 board. |
| frank26080115 | 0:bf7b9fba3924 | 33 | On serial display: |
| frank26080115 | 0:bf7b9fba3924 | 34 | - Press 'r' to print menu |
| frank26080115 | 0:bf7b9fba3924 | 35 | - Press '1': send 0x00 value to IOStat register to turn on 8 LEDs on SC16IS740 board. |
| frank26080115 | 0:bf7b9fba3924 | 36 | - Press '2': send 0xFF value to IOStat register to turn off 8 LEDs on SC16IS740 board. |
| frank26080115 | 0:bf7b9fba3924 | 37 | |
| frank26080115 | 0:bf7b9fba3924 | 38 | (Pls see two pdf file on SPI\sc16is750_int: |
| frank26080115 | 0:bf7b9fba3924 | 39 | - SC16IS740_750_760_6.pdf |
| frank26080115 | 0:bf7b9fba3924 | 40 | - schematics.sc16is750.demo.board.pdf |
| frank26080115 | 0:bf7b9fba3924 | 41 | for more information about SC16IS740 board) |
| frank26080115 | 0:bf7b9fba3924 | 42 | |
| frank26080115 | 0:bf7b9fba3924 | 43 | @Directory contents: |
| frank26080115 | 0:bf7b9fba3924 | 44 | \EWARM: includes EWARM (IAR) project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 45 | \Keil: includes RVMDK (Keil)project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 46 | |
| frank26080115 | 0:bf7b9fba3924 | 47 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
| frank26080115 | 0:bf7b9fba3924 | 48 | makefile: Example's makefile (to build with GNU toolchain) |
| frank26080115 | 0:bf7b9fba3924 | 49 | spi_polling_test.c: Main program |
| frank26080115 | 0:bf7b9fba3924 | 50 | |
| frank26080115 | 0:bf7b9fba3924 | 51 | @How to run: |
| frank26080115 | 0:bf7b9fba3924 | 52 | Hardware configuration: |
| frank26080115 | 0:bf7b9fba3924 | 53 | This example was tested on: |
| frank26080115 | 0:bf7b9fba3924 | 54 | Keil MCB1700 with LPC1768 vers.1 |
| frank26080115 | 0:bf7b9fba3924 | 55 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 56 | - VDDIO: ON |
| frank26080115 | 0:bf7b9fba3924 | 57 | - VDDREGS: ON |
| frank26080115 | 0:bf7b9fba3924 | 58 | - VBUS: ON |
| frank26080115 | 0:bf7b9fba3924 | 59 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 60 | IAR LPC1768 KickStart vers.A |
| frank26080115 | 0:bf7b9fba3924 | 61 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 62 | - PWR_SEL: depend on power source |
| frank26080115 | 0:bf7b9fba3924 | 63 | - DBG_EN : ON |
| frank26080115 | 0:bf7b9fba3924 | 64 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 65 | |
| frank26080115 | 0:bf7b9fba3924 | 66 | SC16IS750 board: |
| frank26080115 | 0:bf7b9fba3924 | 67 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 68 | - JP2: 2-3 (SPI) |
| frank26080115 | 0:bf7b9fba3924 | 69 | - JP16: 2-3 (hard reset) |
| frank26080115 | 0:bf7b9fba3924 | 70 | - Remain jumper: OFF |
| frank26080115 | 0:bf7b9fba3924 | 71 | |
| frank26080115 | 0:bf7b9fba3924 | 72 | SPI connection: |
| frank26080115 | 0:bf7b9fba3924 | 73 | - P0.15 - SCK on eval board connects to SCLK on SC16IS750 board |
| frank26080115 | 0:bf7b9fba3924 | 74 | - P0.16 - SSEL on eval board connects to /CS on SC16IS750 board (used as GPIO) |
| frank26080115 | 0:bf7b9fba3924 | 75 | - P0.17 - MISO on eval board connects to MISO on SC16IS750 board |
| frank26080115 | 0:bf7b9fba3924 | 76 | - P0.18 - MOSI on eval board connects to MOSI on SC16IS750 board |
| frank26080115 | 0:bf7b9fba3924 | 77 | Common power source 3.3V and ground must be connected together between two board. |
| frank26080115 | 0:bf7b9fba3924 | 78 | |
| frank26080115 | 0:bf7b9fba3924 | 79 | Serial display configuration: (e.g: TeraTerm, Hyperterminal, Flash Magic...) |
| frank26080115 | 0:bf7b9fba3924 | 80 | 115200bps |
| frank26080115 | 0:bf7b9fba3924 | 81 | 8 data bit |
| frank26080115 | 0:bf7b9fba3924 | 82 | No parity |
| frank26080115 | 0:bf7b9fba3924 | 83 | 1 stop bit |
| frank26080115 | 0:bf7b9fba3924 | 84 | No flow control |
| frank26080115 | 0:bf7b9fba3924 | 85 | |
| frank26080115 | 0:bf7b9fba3924 | 86 | Running mode: |
| frank26080115 | 0:bf7b9fba3924 | 87 | This example can run on RAM/ROM mode. |
| frank26080115 | 0:bf7b9fba3924 | 88 | |
| frank26080115 | 0:bf7b9fba3924 | 89 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
| frank26080115 | 0:bf7b9fba3924 | 90 | to be connected: |
| frank26080115 | 0:bf7b9fba3924 | 91 | - MCB1700 with LPC1768 ver.1: |
| frank26080115 | 0:bf7b9fba3924 | 92 | + RST: ON |
| frank26080115 | 0:bf7b9fba3924 | 93 | + ISP: ON |
| frank26080115 | 0:bf7b9fba3924 | 94 | - IAR LPC1768 KickStart vers.A: |
| frank26080115 | 0:bf7b9fba3924 | 95 | + RST_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 96 | + ISP_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 97 | |
| frank26080115 | 0:bf7b9fba3924 | 98 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
| frank26080115 | 0:bf7b9fba3924 | 99 | LPC1000CMSIS project" for more information) |
| frank26080115 | 0:bf7b9fba3924 | 100 | |
| frank26080115 | 0:bf7b9fba3924 | 101 | Step to run: |
| frank26080115 | 0:bf7b9fba3924 | 102 | - Step 1: Build example. |
| frank26080115 | 0:bf7b9fba3924 | 103 | - Step 2: Burn hex file into board (if run on ROM mode) |
| frank26080115 | 0:bf7b9fba3924 | 104 | - Step 3: Connect UART0 on board to COM port on your computer |
| frank26080115 | 0:bf7b9fba3924 | 105 | - Step 4: Configure hardware, connect this board with SC16IS750 board as above instruction |
| frank26080115 | 0:bf7b9fba3924 | 106 | - Step 5: Configure serial display as above instruction |
| frank26080115 | 0:bf7b9fba3924 | 107 | - Step 6: Run example and handle SPI transfer via serial display |
| frank26080115 | 0:bf7b9fba3924 | 108 | + Press '1' to turn on 8 LEDs on SC16IS750 board |
| frank26080115 | 0:bf7b9fba3924 | 109 | + Press '2' to turn off 8 LEDs on SC16IS750 board |
| frank26080115 | 0:bf7b9fba3924 | 110 | |
| frank26080115 | 0:bf7b9fba3924 | 111 | (Pls see "LPC17xx Example Description" document - chapter "Examples > SPI > sc16is750_polling" |
| frank26080115 | 0:bf7b9fba3924 | 112 | for more details) |
| frank26080115 | 0:bf7b9fba3924 | 113 | |
| frank26080115 | 0:bf7b9fba3924 | 114 | @Tip: |
| frank26080115 | 0:bf7b9fba3924 | 115 | - Open \EWARM\*.eww project file to run example on IAR |
| frank26080115 | 0:bf7b9fba3924 | 116 | - Open \RVMDK\*.uvproj project file to run example on Keil |