Frank 26080115
These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
RTC/Calibration/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
| frank26080115 | 0:bf7b9fba3924 | 2 | * @file RTC\Calibration\abstract.txt |
| frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
| frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
| frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
| frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the RTC calibration example. |
| frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
| frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
| frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
| frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
| frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
| frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
| frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
| frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
| frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
| frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
| frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 19 | |
| frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
| frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
| frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to calibrate real-time clock |
| frank26080115 | 0:bf7b9fba3924 | 23 | Process: |
| frank26080115 | 0:bf7b9fba3924 | 24 | The calibration logic can periodically adjust the time counter either by not |
| frank26080115 | 0:bf7b9fba3924 | 25 | incrementing the ocunter, or by incrementing the counter by 2 instead 1. This |
| frank26080115 | 0:bf7b9fba3924 | 26 | allow calibrating the RTC oscillator under some typical voltage and temperature |
| frank26080115 | 0:bf7b9fba3924 | 27 | conditions without the need to externally trim the RTC oscillator |
| frank26080115 | 0:bf7b9fba3924 | 28 | In this example: |
| frank26080115 | 0:bf7b9fba3924 | 29 | - Calibration setting: |
| frank26080115 | 0:bf7b9fba3924 | 30 | + Calibration value = 5s; |
| frank26080115 | 0:bf7b9fba3924 | 31 | + Direction: Forward calibration |
| frank26080115 | 0:bf7b9fba3924 | 32 | - Real-time clock setting: |
| frank26080115 | 0:bf7b9fba3924 | 33 | + enable incrementing second counter interrupt |
| frank26080115 | 0:bf7b9fba3924 | 34 | After each 5s, real-time clock will adjust automatically by incrementing the counter |
| frank26080115 | 0:bf7b9fba3924 | 35 | by 2 instead of 1. You can observe calibration process via serial display. |
| frank26080115 | 0:bf7b9fba3924 | 36 | |
| frank26080115 | 0:bf7b9fba3924 | 37 | @Directory contents: |
| frank26080115 | 0:bf7b9fba3924 | 38 | \EWARM: includes EWARM (IAR) project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 39 | \Keil: includes RVMDK (Keil)project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 40 | |
| frank26080115 | 0:bf7b9fba3924 | 41 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
| frank26080115 | 0:bf7b9fba3924 | 42 | makefile: Example's makefile (to build with GNU toolchain) |
| frank26080115 | 0:bf7b9fba3924 | 43 | rtc_calib.c: Main program |
| frank26080115 | 0:bf7b9fba3924 | 44 | |
| frank26080115 | 0:bf7b9fba3924 | 45 | @How to run: |
| frank26080115 | 0:bf7b9fba3924 | 46 | Hardware configuration: |
| frank26080115 | 0:bf7b9fba3924 | 47 | This example was tested only on: |
| frank26080115 | 0:bf7b9fba3924 | 48 | Keil MCB1700 with LPC1768 vers.1 |
| frank26080115 | 0:bf7b9fba3924 | 49 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 50 | - VDDIO: ON |
| frank26080115 | 0:bf7b9fba3924 | 51 | - VDDREGS: ON |
| frank26080115 | 0:bf7b9fba3924 | 52 | - VBUS: ON |
| frank26080115 | 0:bf7b9fba3924 | 53 | - VBAT: ON |
| frank26080115 | 0:bf7b9fba3924 | 54 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 55 | IAR LPC1768 KickStart vers.A |
| frank26080115 | 0:bf7b9fba3924 | 56 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 57 | - PWR_SEL: depend on power source |
| frank26080115 | 0:bf7b9fba3924 | 58 | - DBG_EN : ON |
| frank26080115 | 0:bf7b9fba3924 | 59 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 60 | |
| frank26080115 | 0:bf7b9fba3924 | 61 | Serial display configuration:(e.g: TeraTerm, Hyperterminal, Flash Magic...) |
| frank26080115 | 0:bf7b9fba3924 | 62 | 115200bps |
| frank26080115 | 0:bf7b9fba3924 | 63 | 8 data bit |
| frank26080115 | 0:bf7b9fba3924 | 64 | No parity |
| frank26080115 | 0:bf7b9fba3924 | 65 | 1 stop bit |
| frank26080115 | 0:bf7b9fba3924 | 66 | No flow control |
| frank26080115 | 0:bf7b9fba3924 | 67 | |
| frank26080115 | 0:bf7b9fba3924 | 68 | Running mode: |
| frank26080115 | 0:bf7b9fba3924 | 69 | This example can run on RAM/ROM mode. |
| frank26080115 | 0:bf7b9fba3924 | 70 | |
| frank26080115 | 0:bf7b9fba3924 | 71 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
| frank26080115 | 0:bf7b9fba3924 | 72 | to be connected: |
| frank26080115 | 0:bf7b9fba3924 | 73 | - MCB1700 with LPC1768 ver.1: |
| frank26080115 | 0:bf7b9fba3924 | 74 | + RST: ON |
| frank26080115 | 0:bf7b9fba3924 | 75 | + ISP: ON |
| frank26080115 | 0:bf7b9fba3924 | 76 | - IAR LPC1768 KickStart vers.A: |
| frank26080115 | 0:bf7b9fba3924 | 77 | + RST_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 78 | + ISP_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 79 | |
| frank26080115 | 0:bf7b9fba3924 | 80 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
| frank26080115 | 0:bf7b9fba3924 | 81 | LPC1000CMSIS project" for more information) |
| frank26080115 | 0:bf7b9fba3924 | 82 | |
| frank26080115 | 0:bf7b9fba3924 | 83 | Step to run: |
| frank26080115 | 0:bf7b9fba3924 | 84 | - Step 1: Build example. |
| frank26080115 | 0:bf7b9fba3924 | 85 | - Step 2: Burn hex file into board (if run on ROM mode) |
| frank26080115 | 0:bf7b9fba3924 | 86 | - Step 3: Connect UART0 on this board to COM port on your computer |
| frank26080115 | 0:bf7b9fba3924 | 87 | - Step 4: Configure hardware and serial display as above instruction |
| frank26080115 | 0:bf7b9fba3924 | 88 | - Step 5: Run example and observe on serial display |
| frank26080115 | 0:bf7b9fba3924 | 89 | |
| frank26080115 | 0:bf7b9fba3924 | 90 | (Pls see "LPC17xx Example Description" document - chapter "Examples > RTC > Calibration" |
| frank26080115 | 0:bf7b9fba3924 | 91 | for more details) |
| frank26080115 | 0:bf7b9fba3924 | 92 | |
| frank26080115 | 0:bf7b9fba3924 | 93 | @Tip: |
| frank26080115 | 0:bf7b9fba3924 | 94 | - Open \EWARM\*.eww project file to run example on IAR |
| frank26080115 | 0:bf7b9fba3924 | 95 | - Open \RVMDK\*.uvproj project file to run example on Keil |
| frank26080115 | 0:bf7b9fba3924 | 96 |