These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
PWR/NMI_PowerDown/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
frank26080115 | 0:bf7b9fba3924 | 2 | * @file PWR\NMI_PowerDown\abstract.txt |
frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the NMI PowerDown example. |
frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
frank26080115 | 0:bf7b9fba3924 | 19 | |
frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to enter system in PowerDown mode and wake-up it |
frank26080115 | 0:bf7b9fba3924 | 23 | by using NMI (Non-Maskable Interrupt) |
frank26080115 | 0:bf7b9fba3924 | 24 | Process: |
frank26080115 | 0:bf7b9fba3924 | 25 | NMI(Non-Maskable Interrupt) is the highest priority interrupt, it takes effect |
frank26080115 | 0:bf7b9fba3924 | 26 | as soon as it registers. When connect, a logic 1 on the pin will cause the NMI |
frank26080115 | 0:bf7b9fba3924 | 27 | to be processed. |
frank26080115 | 0:bf7b9fba3924 | 28 | Select P2.10 as NMI pin |
frank26080115 | 0:bf7b9fba3924 | 29 | At the first time, sure that NMI pin has logic 1 because if it connects with |
frank26080115 | 0:bf7b9fba3924 | 30 | ground -> ISP is pulled low, system will enter in ISP mode. |
frank26080115 | 0:bf7b9fba3924 | 31 | After that, call CLKPWR_PowerDown() to enter system in PowerDown mode |
frank26080115 | 0:bf7b9fba3924 | 32 | (Note: In this time, NMI pin must be connected with ground to disable NMI |
frank26080115 | 0:bf7b9fba3924 | 33 | interrupt). |
frank26080115 | 0:bf7b9fba3924 | 34 | When system is PowerDowning..., pulls up NMI to logic 1, NMI occurs |
frank26080115 | 0:bf7b9fba3924 | 35 | and wake-up system. |
frank26080115 | 0:bf7b9fba3924 | 36 | |
frank26080115 | 0:bf7b9fba3924 | 37 | @Directory contents: |
frank26080115 | 0:bf7b9fba3924 | 38 | \EWARM: includes EWARM (IAR) project and configuration files |
frank26080115 | 0:bf7b9fba3924 | 39 | \Keil: includes RVMDK (Keil)project and configuration files |
frank26080115 | 0:bf7b9fba3924 | 40 | |
frank26080115 | 0:bf7b9fba3924 | 41 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
frank26080115 | 0:bf7b9fba3924 | 42 | makefile: Example's makefile (to build with GNU toolchain) |
frank26080115 | 0:bf7b9fba3924 | 43 | nmi_powerdown.c: Main program |
frank26080115 | 0:bf7b9fba3924 | 44 | |
frank26080115 | 0:bf7b9fba3924 | 45 | @How to run: |
frank26080115 | 0:bf7b9fba3924 | 46 | Hardware configuration: |
frank26080115 | 0:bf7b9fba3924 | 47 | This example was tested only on: |
frank26080115 | 0:bf7b9fba3924 | 48 | Keil MCB1700 with LPC1768 vers.1 |
frank26080115 | 0:bf7b9fba3924 | 49 | These jumpers must be configured as following: |
frank26080115 | 0:bf7b9fba3924 | 50 | - VDDIO: ON |
frank26080115 | 0:bf7b9fba3924 | 51 | - VDDREGS: ON |
frank26080115 | 0:bf7b9fba3924 | 52 | - VBUS: ON |
frank26080115 | 0:bf7b9fba3924 | 53 | - Remain jumpers: OFF |
frank26080115 | 0:bf7b9fba3924 | 54 | IAR LPC1768 KickStart vers.A |
frank26080115 | 0:bf7b9fba3924 | 55 | These jumpers must be configured as following: |
frank26080115 | 0:bf7b9fba3924 | 56 | - PWR_SEL: depend on power source |
frank26080115 | 0:bf7b9fba3924 | 57 | - DBG_EN : ON |
frank26080115 | 0:bf7b9fba3924 | 58 | - Remain jumpers: OFF |
frank26080115 | 0:bf7b9fba3924 | 59 | |
frank26080115 | 0:bf7b9fba3924 | 60 | Serial display configuration:(e.g: TeraTerm, Hyperterminal, Flash Magic...) |
frank26080115 | 0:bf7b9fba3924 | 61 | 115200bps |
frank26080115 | 0:bf7b9fba3924 | 62 | 8 data bit |
frank26080115 | 0:bf7b9fba3924 | 63 | No parity |
frank26080115 | 0:bf7b9fba3924 | 64 | 1 stop bit |
frank26080115 | 0:bf7b9fba3924 | 65 | No flow control |
frank26080115 | 0:bf7b9fba3924 | 66 | |
frank26080115 | 0:bf7b9fba3924 | 67 | Running mode: |
frank26080115 | 0:bf7b9fba3924 | 68 | This example can run on RAM/ROM mode. |
frank26080115 | 0:bf7b9fba3924 | 69 | |
frank26080115 | 0:bf7b9fba3924 | 70 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
frank26080115 | 0:bf7b9fba3924 | 71 | to be connected: |
frank26080115 | 0:bf7b9fba3924 | 72 | - MCB1700 with LPC1768 ver.1: |
frank26080115 | 0:bf7b9fba3924 | 73 | + RST: ON |
frank26080115 | 0:bf7b9fba3924 | 74 | + ISP: ON |
frank26080115 | 0:bf7b9fba3924 | 75 | - IAR LPC1768 KickStart vers.A: |
frank26080115 | 0:bf7b9fba3924 | 76 | + RST_E: ON |
frank26080115 | 0:bf7b9fba3924 | 77 | + ISP_E: ON |
frank26080115 | 0:bf7b9fba3924 | 78 | |
frank26080115 | 0:bf7b9fba3924 | 79 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
frank26080115 | 0:bf7b9fba3924 | 80 | LPC1000CMSIS project" for more information) |
frank26080115 | 0:bf7b9fba3924 | 81 | |
frank26080115 | 0:bf7b9fba3924 | 82 | Step to run: |
frank26080115 | 0:bf7b9fba3924 | 83 | - Step 1: Build example. |
frank26080115 | 0:bf7b9fba3924 | 84 | - Step 2: Burn hex file into board (if run on ROM mode) |
frank26080115 | 0:bf7b9fba3924 | 85 | - Step 3: Connect UART0 on this board to COM port on your computer |
frank26080115 | 0:bf7b9fba3924 | 86 | - Step 4: Configure hardware and serial display as above instruction |
frank26080115 | 0:bf7b9fba3924 | 87 | - Step 5: Run example and observe on serial display |
frank26080115 | 0:bf7b9fba3924 | 88 | + First, sure that NMI pin (P2.10) has logic 1 |
frank26080115 | 0:bf7b9fba3924 | 89 | + Press "RESET" button to run example |
frank26080115 | 0:bf7b9fba3924 | 90 | + Connect P2.10 with ground to disable NMI interrupt |
frank26080115 | 0:bf7b9fba3924 | 91 | + Press '1' to enter system in DeepSleep mode |
frank26080115 | 0:bf7b9fba3924 | 92 | + After sleeping..., pull up P2.10 to generate NMI interrupt to wake-up system |
frank26080115 | 0:bf7b9fba3924 | 93 | |
frank26080115 | 0:bf7b9fba3924 | 94 | (Pls see "LPC17xx Example Description" document - chapter "Examples > PWR > NMI_PowerDown" |
frank26080115 | 0:bf7b9fba3924 | 95 | for more details) |
frank26080115 | 0:bf7b9fba3924 | 96 | |
frank26080115 | 0:bf7b9fba3924 | 97 | @Tip: |
frank26080115 | 0:bf7b9fba3924 | 98 | - Open \EWARM\*.eww project file to run example on IAR |
frank26080115 | 0:bf7b9fba3924 | 99 | - Open \RVMDK\*.uvproj project file to run example on Keil |
frank26080115 | 0:bf7b9fba3924 | 100 | - On MCB1700 board, it doesn't have a wiring ground pin output, so you can use UMODE.3 instead |
frank26080115 | 0:bf7b9fba3924 | 101 | (reference MCB1700 datasheet for more information) |