Remote Writing IoT Data to Influx-DB over HTTP-API.
Fork of AvnetATT_shape_hackathon by
config_me.h
- Committer:
- fenar
- Date:
- 2017-10-10
- Revision:
- 35:4a5d307b9692
- Parent:
- 31:d7c386d2e95a
- Child:
- 37:bb05aebd6139
File content as of revision 35:4a5d307b9692:
#ifndef __CONFIG_ME_H_ #define __CONFIG_ME_H_ // User must set these for own context: // This is the server's base URL name. Example "www.google.com" // Note that when you Fork a FLOW, it will typically assign either //static const char * MY_SERVER_URL = "influxdb.io"; static const char * MY_SERVER_URL = "172.27.140.140"; // These are FLOW fields from the Endpoints tab: #define FLOW_BASE_URL "/" #define FLOW_INPUT_NAME "write" // Unless you want to use a different protocol, this field should be left as is: #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: " // This identifier specifies with which FLOW device you are communicating. // If you only have one devive there then you can just leave this as is. // Once your FLOW device has been initialized (Virtual Device Initialize clicked), // the Virtual Device will show up in M2X. This is its "DEVICE SERIAL" field // https://runm-central.att.io/7112dfcbd9ae0/921b0008500b/b2f385c14622519/in/flow #define FLOW_DEVICE_NAME "starterkit002" // This constant defines how often sensors are read and sent up to FLOW #define SENSOR_UPDATE_INTERVAL_MS 5000; //5 seconds // Specify here how many sensor parameters you want reported to FLOW. // You can use only the temperature and humidity from the shield HTS221 // or you can add the reading of the FXO8700CQ motion sensor on the FRDM-K64F board // or if you have a SiLabs PMOD plugged into the shield, you can add its proximity sensor, // UV light, visible ambient light and infrared ambient light readings #define TEMP_HUMIDITY_ONLY 1 #define TEMP_HUMIDITY_ACCELEROMETER 2 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 3 static int iSensorsToReport = TEMP_HUMIDITY_ONLY; //modify this to change your selection // This is the APN name for the cellular network static const char * MY_APN_STR = "default"; //This is for normal HTTP. If you want to use TCP to a specific port, change that here: static const char * MY_PORT_STR = "8086"; #endif