Test Seriale MDOT

Dependencies:   libmDot mbed-rtos mbed

Fork of mDot_LoRa_Connect_Example by MultiTech

Files at this revision

API Documentation at this revision

Comitter:
fdalforno
Date:
Fri Dec 02 16:40:05 2016 +0000
Parent:
6:f0b6fea36e28
Commit message:
Mdot serial

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file
diff -r f0b6fea36e28 -r 0b0835299ee8 main.cpp
--- a/main.cpp	Tue Apr 12 23:44:25 2016 +0000
+++ b/main.cpp	Fri Dec 02 16:40:05 2016 +0000
@@ -5,105 +5,19 @@
 #include <vector>
 #include <algorithm>
 
-// these options must match the settings on your Conduit
-// uncomment the following lines and edit their values to match your configuration
-static std::string config_network_name = "<lora network id>";
-static std::string config_network_pass = "<lora network key>";
-static uint8_t config_frequency_sub_band = 1;
 
-int main() {
-    int32_t ret;
-    mDot* dot;
-    std::vector<uint8_t> data;
-    std::string data_str = "hello!";
-    
-    // get a mDot handle
-    dot = mDot::getInstance();
-    
-    // print library version information
-    logInfo("version: %s", dot->getId().c_str());
 
-    //*******************************************
-    // configuration
-    //*******************************************
-    // reset to default config so we know what state we're in
-    dot->resetConfig();
-    
-    dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
-
-    // set up the mDot with our network information: frequency sub band, network name, and network password
-    // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
-    
-    // frequency sub band is only applicable in the 915 (US) frequency band
-    // if using a MultiTech Conduit gateway, use the same sub band as your Conduit (1-8) - the mDot will use the 8 channels in that sub band
-    // if using a gateway that supports all 64 channels, use sub band 0 - the mDot will use all 64 channels
-    
-//    logInfo("setting to public network");
-//    if ((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) {
-//        logError("failed to set public network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-//    }
-
-    logInfo("setting frequency sub band");    
-    if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
-        logError("failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    logInfo("setting network name");
-    if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) {
-        logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+ 
+Serial pc(USBTX, USBRX);
+Serial uart(PA_2, PA_3);
+  
+int main() {
+    while(1) {
+        if(pc.readable()) {
+            uart.putc(pc.getc());
+        }
+        if(uart.readable()) {
+            pc.putc(uart.getc());
+        }
     }
-    
-    logInfo("setting network password");
-    if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) {
-        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    // a higher spreading factor allows for longer range but lower throughput
-    // in the 915 (US) frequency band, spreading factors 7 - 10 are available
-    // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
-    logInfo("setting TX spreading factor");
-    if ((ret = dot->setTxDataRate(mDot::SF_10)) != mDot::MDOT_OK) {
-        logError("failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    // request receive confirmation of packets from the gateway
-    logInfo("enabling ACKs");
-    if ((ret = dot->setAck(1)) != mDot::MDOT_OK) {
-        logError("failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    // save this configuration to the mDot's NVM
-    logInfo("saving config");
-    if (! dot->saveConfig()) {
-        logError("failed to save configuration");
-    }
-    //*******************************************
-    // end of configuration
-    //*******************************************
-
-    // attempt to join the network
-    logInfo("joining network");
-    while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
-        logError("failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
-        osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
-    }
-
-    // format data for sending to the gateway
-    for (std::string::iterator it = data_str.begin(); it != data_str.end(); it++)
-        data.push_back((uint8_t) *it);
-
-    while (true) {
-        // send the data to the gateway
-        if ((ret = dot->send(data)) != mDot::MDOT_OK) {
-            logError("failed to send", ret, mDot::getReturnCodeString(ret).c_str());
-        } else {
-            logInfo("successfully sent data to gateway");
-        }
-
-        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
-        osDelay(std::max((uint32_t)5000, (uint32_t)dot->getNextTxMs()));
-    }
-
-    return 0;
-}
+}
\ No newline at end of file