frederic blanc
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr_ex.h
- Committer:
- bogdanm
- Date:
- 2014-06-11
- Revision:
- 85:024bf7f99721
- Child:
- 92:4fc01daae5a5
File content as of revision 85:024bf7f99721:
/**
******************************************************************************
* @file stm32f0xx_hal_pwr_ex.h
* @author MCD Application Team
* @version V1.0.0
* @date 28-May-2014
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_PWR_EX_H
#define __STM32F0xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup PWREx
* @{
*/
/* Exported types ------------------------------------------------------------*/
#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
defined (STM32F071xB) || defined (STM32F072xB)
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
This parameter can be a value of @ref PWREx_PVD_detection_level */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWREx_PVD_Mode */
}PWR_PVDTypeDef;
#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
/* defined (STM32F071xB) || defined (STM32F072xB) */
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants
* @{
*/
/** @defgroup PWREx_WakeUp_Pins
* @{
*/
#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
#define PWR_WAKEUP_PIN4 ((uint32_t)0x03)
#define PWR_WAKEUP_PIN5 ((uint32_t)0x04)
#define PWR_WAKEUP_PIN6 ((uint32_t)0x05)
#define PWR_WAKEUP_PIN7 ((uint32_t)0x06)
#define PWR_WAKEUP_PIN8 ((uint32_t)0x07)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
((PIN) == PWR_WAKEUP_PIN2) || \
((PIN) == PWR_WAKEUP_PIN3) || \
((PIN) == PWR_WAKEUP_PIN4) || \
((PIN) == PWR_WAKEUP_PIN5) || \
((PIN) == PWR_WAKEUP_PIN6) || \
((PIN) == PWR_WAKEUP_PIN7) || \
((PIN) == PWR_WAKEUP_PIN8))
#else
#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
((PIN) == PWR_WAKEUP_PIN2))
#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) */
/**
* @}
*/
#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
defined (STM32F071xB) || defined (STM32F072xB)
#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
/** @defgroup PWREx_PVD_detection_level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
/**
* @}
*/
/** @defgroup PWREx_PVD_Mode
* @{
*/
#define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */
#define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
/**
* @}
*/
#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
/* defined (STM32F071xB) || defined (STM32F072xB) */
/** @defgroup PWREx_Flag
* @{
*/
#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
defined (STM32F071xB) || defined (STM32F072xB)
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))
#else
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
/* defined (STM32F071xB) || defined (STM32F072xB) */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Macros
* @{
*/
#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
defined (STM32F071xB) || defined (STM32F072xB)
/**
* @brief Enable the PVD Exti Line.
* @param __EXTILINE__: specifies the PVD EXTI sources to be enabled.
* This parameter can be:
* @arg PWR_EXTI_LINE_PVD
* @retval None.
*/
#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
/**
* @brief Disable the PVD EXTI Line.
* @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
* This parameter can be:
* @arg PWR_EXTI_LINE_PVD
* @retval None.
*/
#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
* This parameter can be:
* @arg PWR_EXTI_LINE_PVD
* @retval None
*/
#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
/**
* @brief Check whether the specified PVD EXTI interrupt flag is set or not.
* @param __EXTILINE__: specifies the PVD EXTI sources to be cleared.
* This parameter can be:
* @arg PWR_EXTI_LINE_PVD
* @retval EXTI PVD Line Status.
*/
#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__))
/**
* @brief Clear the PVD EXTI flag.
* @param __EXTILINE__: specifies the PVD EXTI sources to be cleared.
* This parameter can be:
* @arg PWR_EXTI_LINE_PVD
* @retval None.
*/
#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__))
#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
/* defined (STM32F071xB) || defined (STM32F072xB) */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/* I/O operation functions ***************************************************/
#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
defined (STM32F071xB) || defined (STM32F072xB)
void HAL_PWR_PVD_IRQHandler(void);
void HAL_PWR_PVDCallback(void);
/* Peripheral Control functions **********************************************/
void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWR_EnablePVD(void);
void HAL_PWR_DisablePVD(void);
#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
/* defined (STM32F071xB) || defined (STM32F072xB) */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/