frederic blanc
OneWire DS18B20,DS2450,MAX31850
Dependents: MAX31850_HelloWorld
Revision 0:9acbbb021a43, committed 2015-02-12
- Comitter:
- fblanc
- Date:
- Thu Feb 12 14:03:55 2015 +0000
- Commit message:
- MAX31850 ok
Changed in this revision
diff -r 000000000000 -r 9acbbb021a43 DS18X20.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DS18X20.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,350 @@
+/**
+* @file DS18x20.c
+* @brief library of DS18X20 1-Wire digital thermometer (http://www.maxim-ic.com/datasheet/index.mvp/id/2812)
+* @author Maciej Rajtar (Published 10 May 2010 www.mbed.org)
+* @author Frederic BLANC (Published 01/03/2012 www.mbed.org)
+*/
+#include "mbed.h"
+#include "onewire.h"
+#include "DS18X20.h"
+#include "crc8.h"
+#include "utils.h"
+//**********************************************************************************************************
+//* DS18X20_show_temp
+//**********************************************************************************************************
+
+/**
+* @brief DS18X20_show_temp
+* @param [in] id[] = rom_code
+* @param [in] n number of id[n]
+* @param [out] text temp in degre celsius
+
+* @date 20/06/2011
+*/
+void DS18X20_show_temp(uint8_t subzero, uint8_t cel, uint8_t cel_frac_bits,char *text) {
+ uint16_t decicelsius;
+ char s[10];
+ float temperature;
+ sprintf(text,"");
+ sprintf(s,"%s", (subzero)?"-":"");
+ strcat(text,s);
+ decicelsius = DS18X20_temp_to_decicel(subzero, cel, cel_frac_bits);
+ temperature = decicelsius;
+ temperature = temperature/10;
+ sprintf(s,"%4.1f", temperature);
+ strcat(text,s);
+
+}
+/**
+* @brief DS18X20_show_temp
+* @param [in] id[] = rom_code
+* @param [in] n number of id[n]
+* @return temp in degre celsius
+
+* @date 21/10/2011
+*/
+float DS18X20_temp(uint8_t subzero, uint8_t cel, uint8_t cel_frac_bits) {
+ return ((subzero)?-1:1)*DS18X20_temp_to_decicel(subzero, cel, cel_frac_bits)/10;
+}
+//**********************************************************************************************************
+//* DS18X20_get_power_status
+//**********************************************************************************************************
+
+/**
+* @brief get power status of DS18x20
+* @param [in] id[] = rom_code
+* @return DS18X20_POWER_EXTERN or DS18X20_POWER_PARASITE
+* @date 20/06/2011
+*/
+uint8_t DS18X20_get_power_status(uint8_t id[]) {
+ uint8_t pstat;
+ ow_reset();
+ ow_command(DS18X20_READ_POWER_SUPPLY, id);
+ pstat=ow_bit_io(1); // pstat 0=is parasite/ !=0 ext. powered
+ ow_reset();
+ return (pstat) ? DS18X20_POWER_EXTERN:DS18X20_POWER_PARASITE;
+}
+
+/**
+* @brief get power status of DS18x20
+* @param [in] n num bus onewire
+* @param [in] id[] = rom_code
+* @return DS18X20_POWER_EXTERN or DS18X20_POWER_PARASITE
+* @date 6/09/2011
+*/
+uint8_t DS18X20_get_power_status(uint8_t n,uint8_t id[]) {
+ uint8_t pstat;
+ ow_reset(n);
+ ow_command(n,DS18X20_READ_POWER_SUPPLY, id);
+ pstat=ow_bit_io(n,1); // pstat 0=is parasite/ !=0 ext. powered
+ ow_reset(n);
+ return (pstat) ? DS18X20_POWER_EXTERN:DS18X20_POWER_PARASITE;
+}
+//**********************************************************************************************************
+//* DS18X20_start_meas
+//**********************************************************************************************************
+/**
+* @brief reads temperature (scratchpad) of sensor with rom-code id
+ output: subzero==1 if temp.<0, cel: full celsius, mcel: frac
+ in millicelsius*0.1
+ i.e.: subzero=1, cel=18, millicel=5000 = -18,5000�C
+* @param [in] n num bus onewire
+* @param [in] id[] = rom_code
+* @param [out] temperature
+* @return DS18X20_OK or DS18X20_ERROR_CRC
+* @date 07/12/2012
+*/
+uint8_t DS18X20_read_meas(uint8_t n,uint8_t id[], float* temperature) {
+ uint8_t i;
+ uint8_t sp[DS18X20_SP_SIZE];
+ uint8_t subzero;
+ uint8_t cel;
+ uint8_t cel_frac_bits;
+
+ ow_reset(n);
+ ow_command(n,DS18X20_READ, id);
+ for ( i=0 ; i< DS18X20_SP_SIZE; i++ )
+ sp[i]=ow_byte_rd(n);
+ if ( crc8( &sp[0], DS18X20_SP_SIZE ) ){
+ if ((sp[DS18X20_SP_SIZE-1]==0xFF) && (sp[DS18X20_SP_SIZE-2]==0xFF))
+ return OW_ERROR; // bus error
+ return DS18X20_ERROR_CRC; // data error
+ }
+
+ DS18X20_meas_to_cel(id[0], sp, &subzero, &cel, &cel_frac_bits);
+ *temperature = cel_frac_bits*.0625;
+ *temperature += cel;
+ if (subzero)
+ *temperature *= -1;
+ return DS18X20_OK;
+}
+/**
+* @brief start measurement (CONVERT_T) for all sensors if input id==NULL
+ or for single sensor. then id is the rom-code
+* @param [in] with_power_extern
+* @param [in] rom_code
+* @return DS18X20_OK or DS18X20_START_FAIL
+* @date 20/06/2011
+*/
+uint8_t DS18X20_start_meas( uint8_t with_power_extern, uint8_t id[]) {
+ ow_reset(); //**
+ if ( ow_test_pin() ) { // only send if bus is "idle" = high
+ ow_command( DS18X20_CONVERT_T, id );
+ if (with_power_extern != DS18X20_POWER_EXTERN)
+ ow_parasite_enable();
+ return DS18X20_OK;
+ }
+ return DS18X20_START_FAIL;
+
+}
+/**
+* @brief start measurement (CONVERT_T) for all sensors if input id==NULL
+ or for single sensor. then id is the rom-code
+* @param [in] n num bus onewire
+* @param [in] with_power_extern
+* @param [in] rom_code
+* @return DS18X20_OK or DS18X20_START_FAIL
+* @date 06/09/2011
+*/
+uint8_t DS18X20_start_meas(uint8_t n, uint8_t with_power_extern, uint8_t id[]) {
+ ow_reset(n); //**
+ if ( ow_test_pin(n) ) { // only send if bus is "idle" = high
+ ow_command(n, DS18X20_CONVERT_T, id );
+ if (with_power_extern != DS18X20_POWER_EXTERN)
+ ow_parasite_enable(n);
+ return DS18X20_OK;
+ }
+ return DS18X20_START_FAIL;
+
+}
+//**********************************************************************************************************
+//* DS18X20_read_meas
+//**********************************************************************************************************
+
+/**
+* @brief reads temperature (scratchpad) of sensor with rom-code id
+ output: subzero==1 if temp.<0, cel: full celsius, mcel: frac
+ in millicelsius*0.1
+ i.e.: subzero=1, cel=18, millicel=5000 = -18,5000�C
+* @param [in] id[] = rom_code
+* @param [out] subzero
+* @param [out] cel
+* @param [out] cel_frac_bits
+* @return DS18X20_OK or DS18X20_ERROR_CRC
+* @date 20/06/2011
+*/
+uint8_t DS18X20_read_meas(uint8_t id[], uint8_t *subzero,
+ uint8_t *cel, uint8_t *cel_frac_bits) {
+ uint8_t i;
+ uint8_t sp[DS18X20_SP_SIZE];
+
+ ow_reset();
+ ow_command(DS18X20_READ, id);
+ for ( i=0 ; i< DS18X20_SP_SIZE; i++ )
+ sp[i]=ow_byte_rd();
+ if ( crc8( &sp[0], DS18X20_SP_SIZE ) ){
+ if ((sp[DS18X20_SP_SIZE-1]==0xFF) && (sp[DS18X20_SP_SIZE-2]==0xFF))
+ return OW_ERROR; // bus error
+ return DS18X20_ERROR_CRC; // data error
+ }
+
+ DS18X20_meas_to_cel(id[0], sp, subzero, cel, cel_frac_bits);
+ return DS18X20_OK;
+}
+/**
+* @brief reads temperature (scratchpad) of sensor with rom-code id
+ output: subzero==1 if temp.<0, cel: full celsius, mcel: frac
+ in millicelsius*0.1
+ i.e.: subzero=1, cel=18, millicel=5000 = -18,5000�C
+* @param [in] n num bus onewire
+* @param [in] id[] = rom_code
+* @param [out] subzero
+* @param [out] cel
+* @param [out] cel_frac_bits
+* @return DS18X20_OK or DS18X20_ERROR_CRC
+* @date 06/09/2011
+*/
+uint8_t DS18X20_read_meas(uint8_t n,uint8_t id[], uint8_t *subzero,
+ uint8_t *cel, uint8_t *cel_frac_bits) {
+ uint8_t i;
+ uint8_t sp[DS18X20_SP_SIZE];
+
+ ow_reset(n);
+ ow_command(n,DS18X20_READ, id);
+ for ( i=0 ; i< DS18X20_SP_SIZE; i++ )
+ sp[i]=ow_byte_rd(n);
+ if ( crc8( &sp[0], DS18X20_SP_SIZE ) ){
+ if ((sp[DS18X20_SP_SIZE-1]==0xFF) && (sp[DS18X20_SP_SIZE-2]==0xFF))
+ return OW_ERROR; // bus error
+ return DS18X20_ERROR_CRC; // data error
+ }
+
+ DS18X20_meas_to_cel(id[0], sp, subzero, cel, cel_frac_bits);
+ return DS18X20_OK;
+}
+/**
+* @brief convert raw value from DS18x20 to Celsius
+ input is:
+ - familycode fc (0x10/0x28 see header)
+ - scratchpad-buffer
+ output is:
+ - cel full celsius
+ - fractions of celsius in millicelsius*(10^-1)/625 (the 4 LS-Bits)
+ - subzero =0 positiv / 1 negativ
+ always returns DS18X20_OK
+ TODO invalid-values detection (but should be covered by CRC)
+* @param [in] fc
+* @param [in] sp
+* @param [out] subzero
+* @param [out] cel
+* @param [out] cel_frac_bits
+* @return DS18X20_OK
+* @date 20/06/2011
+*/
+uint8_t DS18X20_meas_to_cel( uint8_t fc, uint8_t *sp,
+ uint8_t* subzero, uint8_t* cel, uint8_t* cel_frac_bits) {
+ uint16_t meas;
+ uint8_t i;
+
+ meas = sp[0]; // LSB
+ meas |= ((uint16_t)sp[1])<<8; // MSB
+ //meas = 0xff5e; meas = 0xfe6f;
+
+ // only work on 12bit-base
+ if ( fc == DS18S20_ID ) { // 9 -> 12 bit if 18S20
+ /* Extended measurements for DS18S20 contributed by Carsten Foss */
+ meas &= (uint16_t) 0xfffe; // Discard LSB , needed for later extended precicion calc
+ meas <<= 3; // Convert to 12-bit , now degrees are in 1/16 degrees units
+ meas += (16 - sp[6]) - 4; // Add the compensation , and remember to subtract 0.25 degree (4/16)
+ }
+
+ // check for negative
+ if ( meas & 0x8000 ) {
+ *subzero=1; // mark negative
+ meas ^= 0xffff; // convert to positive => (twos complement)++
+ meas++;
+ } else *subzero=0;
+
+ // clear undefined bits for B != 12bit
+ if ( fc == DS18B20_ID ) { // check resolution 18B20
+ i = sp[DS18B20_CONF_REG];
+ if ( (i & DS18B20_12_BIT) == DS18B20_12_BIT ) ;
+ else if ( (i & DS18B20_11_BIT) == DS18B20_11_BIT )
+ meas &= ~(DS18B20_11_BIT_UNDF);
+ else if ( (i & DS18B20_10_BIT) == DS18B20_10_BIT )
+ meas &= ~(DS18B20_10_BIT_UNDF);
+ else { // if ( (i & DS18B20_9_BIT) == DS18B20_9_BIT ) {
+ meas &= ~(DS18B20_9_BIT_UNDF);
+ }
+ }
+
+ *cel = (uint8_t)(meas >> 4);
+ *cel_frac_bits = (uint8_t)(meas & 0x000F);
+
+ return DS18X20_OK;
+}
+
+/**
+* @brief converts to decicelsius
+ input is ouput from meas_to_cel
+ i.e.: sz=0, c=28, frac=15 returns 289 (=28.9�C)
+0 0 0
+1 625 625 1
+2 1250 250
+3 1875 875 3
+4 2500 500 4
+5 3125 125
+6 3750 750 6
+7 4375 375
+8 5000 0
+9 5625 625 9
+10 6250 250
+11 6875 875 11
+12 7500 500 12
+13 8125 125
+14 8750 750 14
+15 9375 375
+* @param [in] subzero
+* @param [in] cel
+* @param [in] cel_frac_bits
+* @return absolute value of temperatur in decicelsius
+* @date 20/06/2011
+*/
+uint16_t DS18X20_temp_to_decicel(uint8_t subzero, uint8_t cel,
+ uint8_t cel_frac_bits) {
+ uint16_t h;
+ uint8_t i;
+ uint8_t need_rounding[] = { 1, 3, 4, 6, 9, 11, 12, 14 };
+
+ h = cel_frac_bits*DS18X20_FRACCONV/1000;
+ h += cel*10;
+ if (!subzero) {
+ for (i=0; i<sizeof(need_rounding); i++) {
+ if ( cel_frac_bits == need_rounding[i] ) {
+ h++;
+ break;
+ }
+ }
+ }
+ return h;
+}
+/**
+* @brief compare temperature values (full celsius only)
+* @param [in] subzero1
+* @param [in] cel1
+* @param [in] subzero2
+* @param [in] cel2
+* @return -1 if param-pair1 < param-pair2
+ 0 if ==
+ 1 if >
+* @date 20/06/2011
+*/
+int8_t DS18X20_temp_cmp(uint8_t subzero1, uint16_t cel1,
+ uint8_t subzero2, uint16_t cel2) {
+ int16_t t1 = (subzero1) ? (cel1*(-1)) : (cel1);
+ int16_t t2 = (subzero2) ? (cel2*(-1)) : (cel2);
+
+ if (t1<t2) return -1;
+ if (t1>t2) return 1;
+ return 0;
+}
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 DS18X20.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DS18X20.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,66 @@ +/* DS18X20 specific values (see datasheet www.maxim-ic.com/datasheet/index.mvp/id/2812) */ +#ifndef _DS18X20_ +#define _DS18X20_ +#define DS18S20_ID 0x10 +#define DS18B20_ID 0x28 + +#define DS18X20_POWER_PARASITE 0x00 +#define DS18X20_POWER_EXTERN 0x01 +#define DS18X20_CONVERT_T 0x44 +#define DS18X20_READ 0xBE +#define DS18X20_WRITE 0x4E +#define DS18X20_EE_WRITE 0x48 +#define DS18X20_EE_RECALL 0xB8 +#define DS18X20_READ_POWER_SUPPLY 0xB4 + +#define DS18X20_OK 0x00 +#define DS18X20_ERROR 0x01 +#define DS18X20_START_FAIL 0x02 +#define DS18X20_ERROR_CRC 0x03 + +#define DS18B20_CONF_REG 4 +#define DS18B20_9_BIT 0 +#define DS18B20_10_BIT (1<<5) +#define DS18B20_11_BIT (1<<6) +#define DS18B20_12_BIT ((1<<6)|(1<<5)) + +// indefined bits in LSB if 18B20 != 12bit +#define DS18B20_9_BIT_UNDF ((1<<0)|(1<<1)|(1<<2)) +#define DS18B20_10_BIT_UNDF ((1<<0)|(1<<1)) +#define DS18B20_11_BIT_UNDF ((1<<0)) +#define DS18B20_12_BIT_UNDF 0 + +// conversion times in ms +#define DS18B20_TCONV_12BIT 750 +#define DS18B20_TCONV_11BIT DS18B20_TCONV_12_BIT/2 +#define DS18B20_TCONV_10BIT DS18B20_TCONV_12_BIT/4 +#define DS18B20_TCONV_9BIT DS18B20_TCONV_12_BIT/8 +#define DS18S20_TCONV DS18B20_TCONV_12_BIT + +// constant to convert the fraction bits to cel*(10^-4) +#define DS18X20_FRACCONV 625 + +#define DS18X20_SP_SIZE 9 + +// DS18X20 EEPROM-Support +#define DS18X20_WRITE_SCRATCHPAD 0x4E +#define DS18X20_COPY_SCRATCHPAD 0x48 +#define DS18X20_RECALL_E2 0xB8 +#define DS18X20_COPYSP_DELAY 10 /* ms */ +#define DS18X20_TH_REG 2 +#define DS18X20_TL_REG 3 + +void DS18X20_show_temp(uint8_t subzero, uint8_t cel, uint8_t cel_frac_bits,char *text); +float DS18X20_temp(uint8_t subzero, uint8_t cel, uint8_t cel_frac_bits); +uint8_t DS18X20_get_power_status(uint8_t id[]); +uint8_t DS18X20_get_power_status(uint8_t n,uint8_t id[]); +uint8_t DS18X20_start_meas( uint8_t with_external, uint8_t id[]); +uint8_t DS18X20_start_meas(uint8_t n, uint8_t with_external, uint8_t id[]); +uint8_t DS18X20_read_meas(uint8_t id[], uint8_t *subzero, uint8_t *cel, uint8_t *cel_frac_bits); +uint8_t DS18X20_read_meas(uint8_t n, uint8_t id[], uint8_t *subzero, uint8_t *cel, uint8_t *cel_frac_bits); +uint8_t DS18X20_read_meas_single(uint8_t familycode, uint8_t *subzero, uint8_t *cel, uint8_t *cel_frac_bits); +uint8_t DS18X20_meas_to_cel( uint8_t fc, uint8_t *sp, uint8_t* subzero, uint8_t* cel, uint8_t* cel_frac_bits); +uint8_t DS18X20_read_meas(uint8_t n,uint8_t id[], float* temperature); +uint16_t DS18X20_temp_to_decicel(uint8_t subzero, uint8_t cel, uint8_t cel_frac_bits); +int8_t DS18X20_temp_cmp(uint8_t subzero1, uint16_t cel1, uint8_t subzero2, uint16_t cel2); +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 DS2450.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DS2450.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,464 @@
+/**
+* @file DS2450.c
+* @brief library of DS2450 1-Wire Quad A/D Converter (http://www.maxim-ic.com/datasheet/index.mvp/id/2921)
+* @author Frederic BLANC (Published 01/03/2012 www.mbed.org)
+*/
+#include "mbed.h"
+#include "onewire.h"
+#include "DS2450.h"
+#include "crc8.h"
+#include "crc16.h"
+#include "utils.h"
+//**********************************************************************************************************
+//* DS2450_read_ADC
+//**********************************************************************************************************
+
+/**
+ * @brief lancement lecture DS2450 ADC
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [out] adc[] tableau des valeurs des adc
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_read_ADC(uint8_t id[], uint16_t adc[]) {
+ uint8_t i,j;
+ uint8_t error;
+ uint8_t sp[DS2450_SP_SIZE];
+ //waiting for convertion time ( nbchannel x resolution x 80�s +160�s)
+
+ error=DS2450_read_page(&id[0],DS2450_PAGE0,&sp[0]); //read data
+ if (error)
+ return error;
+ j=0;
+ for (i=0;i<8;i+=2)
+ adc[j++]=uint8_to_uint16(sp[i+3],sp[i+4]); //sp[i+3] LSB ,sp[i+4] MSB
+ return OW_OK;
+}
+
+
+/**
+ * @brief lancement lecture DS2450 ADC
+ * @param [in] n num bus onewire
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [out] adc[] tableau des valeurs des adc
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 07/09/2011
+ *
+ */
+uint8_t DS2450_read_ADC(uint8_t n,uint8_t id[], uint16_t adc[]) {
+ uint8_t i,j;
+ uint8_t error;
+ uint8_t sp[DS2450_SP_SIZE];
+ //waiting for convertion time ( nbchannel x resolution x 80�s +160�s)
+
+ error=DS2450_read_page(n,&id[0],DS2450_PAGE0,&sp[0]); //read data
+ if (error)
+ return error;
+ j=0;
+ for (i=0;i<8;i+=2)
+ adc[j++]=uint8_to_uint16(sp[i+3],sp[i+4]); //sp[i+3] LSB ,sp[i+4] MSB
+ return OW_OK;
+}
+//**********************************************************************************************************
+//* DS2450_start_and_read_ADC
+//**********************************************************************************************************
+
+/**
+ * @brief lancement & lecture DS2450 ADC
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [out] adc[] tableau des valeurs des adc
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_start_and_read_ADC(uint8_t id[], uint16_t adc[]) {
+ uint8_t i,j;
+ uint8_t error;
+ uint8_t sp[DS2450_SP_SIZE];
+
+ error=DS2450_convert(&id[0],0x0F,0x00); //start convert
+ if (error)
+ return error;
+
+ wait_ms(15); //waiting for convertion time ( nbchannel x resolution x 80�s +160�s)
+
+ error=DS2450_read_page(&id[0],DS2450_PAGE0,&sp[0]); //read data
+ if (error)
+ return error;
+
+ j=0;
+ for (i=0;i<8;i+=2)
+ adc[j++]=uint8_to_uint16(sp[i+3],sp[i+4]); //sp[i+3] LSB ,sp[i+4] MSB
+ return OW_OK;
+}
+
+/**
+ * @brief lancement & lecture DS2450 ADC
+ * @param [in] n num bus onewire
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [out] adc[] tableau des valeurs des adc
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 07/09/2011
+ *
+ */
+uint8_t DS2450_start_and_read_ADC(uint8_t n,uint8_t id[], uint16_t adc[]) {
+ uint8_t i,j;
+ uint8_t error;
+ uint8_t sp[DS2450_SP_SIZE];
+
+ error=DS2450_convert(n,&id[0],0x0F,0x00); //start convert
+ if (error)
+ return error;
+
+ wait_ms(15); //waiting for convertion time ( nbchannel x resolution x 80�s +160�s)
+
+ error=DS2450_read_page(n,&id[0],DS2450_PAGE0,&sp[0]); //read data
+ if (error)
+ return error;
+
+ j=0;
+ for (i=0;i<8;i+=2)
+ adc[j++]=uint8_to_uint16(sp[i+3],sp[i+4]); //sp[i+3] LSB ,sp[i+4] MSB
+ return OW_OK;
+}
+
+//**********************************************************************************************************
+//* DS2450_read_page
+//**********************************************************************************************************
+
+/**
+ * @brief lancement lecture page DS2450 ADC
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] adresse de la page a lire
+ * @param [out] uint16_t sp tableau des valeurs de la page
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_read_page(uint8_t id[], uint8_t adresse,
+ uint8_t *sp) {
+ uint8_t i;
+ if (id[0] == DS2450_ID) {
+ if (ow_reset()) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_READ_MEMORY; // command
+ sp[1]=adresse; //adress page LSB
+ sp[2]=0; //adress page MSB
+ ow_command(sp[0], &id[0]);
+ ow_byte_wr(sp[1]);
+ ow_byte_wr(sp[2]);
+
+ for ( i=3 ; i< DS2450_SP_SIZE; i++ ) { //read 8xdata + CRC16
+ sp[i]=ow_byte_rd();
+ }
+
+ if (ctrl_crc16( &sp[0], DS2450_SP_SIZE ) ) { //CRC16 (command+adress page LSB+adress page MSB+8xdata)
+ wait_ms(100); //wait 100ms if error
+ if ((sp[DS2450_SP_SIZE-1]==0xFF) && (sp[DS2450_SP_SIZE-2]==0xFF))
+ return OW_ERROR; // bus error
+ if ((sp[DS2450_SP_SIZE-1]==0x00) && (sp[DS2450_SP_SIZE-2]==0x00))
+ return OW_BUSY;
+
+ return OW_ERROR_CRC; // data error
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+/**
+ * @brief lancement lecture page DS2450 ADC
+ * @param [in] n num bus onewire
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] adresse de la page a lire
+ * @param [out] sp tableau des valeurs de la page
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 07/09/2011
+ *
+ */
+uint8_t DS2450_read_page(uint8_t n,uint8_t id[], uint8_t adresse,
+ uint8_t *sp) {
+ uint8_t i;
+ if (id[0] == DS2450_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_READ_MEMORY; // command
+ sp[1]=adresse; //adress page LSB
+ sp[2]=0; //adress page MSB
+ ow_command(n,sp[0], &id[0]);
+ ow_byte_wr(n,sp[1]);
+ ow_byte_wr(n,sp[2]);
+
+ for ( i=3 ; i< DS2450_SP_SIZE; i++ ) { //read 8xdata + CRC16
+ sp[i]=ow_byte_rd(n);
+ }
+
+ if (ctrl_crc16( &sp[0], DS2450_SP_SIZE ) ) { //CRC16 (command+adress page LSB+adress page MSB+8xdata)
+ wait_ms(100); //wait 100ms if error
+ if ((sp[DS2450_SP_SIZE-1]==0xFF) && (sp[DS2450_SP_SIZE-2]==0xFF))
+ return OW_ERROR; // bus error
+ if ((sp[DS2450_SP_SIZE-1]==0x00) && (sp[DS2450_SP_SIZE-2]==0x00))
+ return OW_BUSY;
+
+ return OW_ERROR_CRC; // data error
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+//**********************************************************************************************************
+//* DS2450_convert
+//**********************************************************************************************************
+
+/**
+ * @brief lancement convertion DS2450 ADC
+ * @param [in] uint8_t id[] tableau d'identifiant OW
+ * @param [in] uint8_t input_select_mask
+ * @param [in] uint8_t read_out_control
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_convert(uint8_t id[], uint8_t input_select_mask,uint8_t read_out_control) {
+ uint8_t i;
+ uint8_t sp[5];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset()) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_CONVERT; // command
+ sp[1]=input_select_mask; //mask
+ sp[2]=read_out_control; //control
+ ow_command(sp[0], &id[0]);
+ ow_byte_wr(sp[1]);
+ ow_byte_wr(sp[2]);
+ for ( i=3 ; i< 5; i++ ) { // read CRC16
+ sp[i]=ow_byte_rd();
+ }
+
+ if (ctrl_crc16( &sp[0], 5 ) ) { //CRC16 (command+mask LSB+control)
+ if ((sp[3]==0xFF) && (sp[3]==0xFF))
+ return OW_ERROR;
+ return OW_ERROR_CRC;
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+/**
+ * @brief lancement convertion DS2450 ADC
+ * @param [in] n num bus onewire
+ * @param [in] uint8_t id[] tableau d'identifiant OW
+ * @param [in] uint8_t input_select_mask
+ * @param [in] uint8_t read_out_control
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 07/09/2011
+ *
+ */
+uint8_t DS2450_convert(uint8_t n,uint8_t id[], uint8_t input_select_mask,uint8_t read_out_control) {
+ uint8_t i;
+ uint8_t sp[5];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_CONVERT; // command
+ sp[1]=input_select_mask; //mask
+ sp[2]=read_out_control; //control
+ ow_command(n,sp[0], &id[0]);
+ ow_byte_wr(n,sp[1]);
+ ow_byte_wr(n,sp[2]);
+ for ( i=3 ; i< 5; i++ ) { // read CRC16
+ sp[i]=ow_byte_rd(n);
+ }
+
+ if (ctrl_crc16( &sp[0], 5 ) ) { //CRC16 (command+mask LSB+control)
+ if ((sp[3]==0xFF) && (sp[3]==0xFF))
+ return OW_ERROR;
+ return OW_ERROR_CRC;
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+
+//**********************************************************************************************************
+//* DS2450_configure_channel_ADC
+//**********************************************************************************************************
+
+/**
+ * @brief configure canal ADC DS2450
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] channel
+ * @param [in] conflsb configuration OE-A OC-A 0 0 RC3-A RC2-A RC1-A RC0-A
+ * @param [in] confmsb configuration POR 0 AFH-A AFL-A AEH-A AEL-A 0 IR-A
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_configure_channel_ADC(uint8_t id[],uint8_t channel,uint8_t conflsb,uint8_t confmsb) {
+ uint8_t i;
+ uint8_t sp[7];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset()) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_WRITE_MEMORY; // command
+ sp[1]=DS2450_PAGE1+channel; //adress page LSB
+ sp[2]=0x00; //adress page MSB
+ sp[3]=conflsb; //databyte
+ ow_command(sp[0], &id[0]);
+ ow_byte_wr(sp[1]);
+ ow_byte_wr(sp[2]);
+ ow_byte_wr(sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd();
+ }
+
+ if (ctrl_crc16( &sp[0], 6 ) ) //CRC16 (command+adress page LSB+adress page MSB+databyte)
+ return OW_ERROR_CRC;
+ sp[3]=confmsb; //databyte
+ ow_byte_wr(sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd();
+ }
+
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+/**
+ * @brief configure canal ADC DS2450
+ * @param [in] n num bus onewire
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] channel
+ * @param [in] conflsb configuration OE-A OC-A 0 0 RC3-A RC2-A RC1-A RC0-A
+ * @param [in] confmsb configuration POR 0 AFH-A AFL-A AEH-A AEL-A 0 IR-A
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_configure_channel_ADC(uint8_t n,uint8_t id[],uint8_t channel,uint8_t conflsb,uint8_t confmsb) {
+ uint8_t i;
+ uint8_t sp[7];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_WRITE_MEMORY; // command
+ sp[1]=DS2450_PAGE1+channel; //adress page LSB
+ sp[2]=0x00; //adress page MSB
+ sp[3]=conflsb; //databyte
+ ow_command(n,sp[0], &id[0]);
+ ow_byte_wr(n,sp[1]);
+ ow_byte_wr(n,sp[2]);
+ ow_byte_wr(n,sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd(n);
+ }
+
+ if (ctrl_crc16( &sp[0], 6 ) ) //CRC16 (command+adress page LSB+adress page MSB+databyte)
+ return OW_ERROR_CRC;
+ sp[3]=confmsb; //databyte
+ ow_byte_wr(n,sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd(n);
+ }
+
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+//**********************************************************************************************************
+//* DS2450_configure_channel_ADC
+//**********************************************************************************************************
+
+/**
+ * @brief configure PAGE
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] uint8_t adresse de la page a ecrire
+ * @param [in] config_page tableau de 8 byte
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 20/06/2011
+ *
+ */
+uint8_t DS2450_configure_page(uint8_t id[], uint8_t adresse,uint8_t configpage[]) {
+ uint8_t i,j;
+ uint8_t sp[7];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset()) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_WRITE_MEMORY; // command
+ sp[1]=adresse; //adress page LSB
+ sp[2]=0x00; //adress page MSB
+ sp[3]=configpage[0]; //databyte
+ ow_command(sp[0], &id[0]);
+ ow_byte_wr(sp[1]);
+ ow_byte_wr(sp[2]);
+ ow_byte_wr(sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd();
+ }
+
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+
+ for ( j=1 ; j< 7; j++ ) {
+ sp[3]=configpage[j]; //databyte
+ ow_byte_wr(sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd();
+ }
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+/**
+ * @brief configure PAGE
+ * @param [in] n num bus onewire
+ * @param [in] id[] tableau d'identifiant OW
+ * @param [in] uint8_t adresse de la page a ecrire
+ * @param [in] config_page tableau de 8 byte
+ * @return OW_OK si erreur retourne OW_ERROR_CRC
+ * @date 07/09/2011
+ *
+ */
+uint8_t DS2450_configure_page(uint8_t n,uint8_t id[], uint8_t adresse,uint8_t configpage[]) {
+ uint8_t i,j;
+ uint8_t sp[7];
+ if (id[0] == DS2450_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=DS2450_WRITE_MEMORY; // command
+ sp[1]=adresse; //adress page LSB
+ sp[2]=0x00; //adress page MSB
+ sp[3]=configpage[0]; //databyte
+ ow_command(n,sp[0], &id[0]);
+ ow_byte_wr(n,sp[1]);
+ ow_byte_wr(n,sp[2]);
+ ow_byte_wr(n,sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd(n);
+ }
+
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+
+ for ( j=1 ; j< 7; j++ ) {
+ sp[3]=configpage[j]; //databyte
+ ow_byte_wr(n,sp[3]);
+ for ( i=4 ; i< 7; i++ ) { //read CRC16+databyte
+ sp[i]=ow_byte_rd(n);
+ }
+ if (sp[3]!=sp[6] ) //control data
+ return OW_ERROR_CRC;
+
+ }
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 DS2450.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DS2450.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,47 @@ +/* DS2450 specific values (see datasheet www.maxim-ic.com/datasheet/index.mvp/id/2921) */ +#ifndef _DS2450_ +#define _DS2450_ +#define DS2450_ID 0x20 +#define DS2450_READ_MEMORY 0xAA +#define DS2450_WRITE_MEMORY 0x55 +#define DS2450_CONVERT 0x3C + +#define DS2450_SP_SIZE 13 +#define DS2450_PAGE0 0x00 +#define DS2450_PAGE1 0x08 +#define DS2450_PAGE2 0x10 +#define DS2450_PAGE3 0x18 + +#define DS2450_ADCA 0x00 //channel A +#define DS2450_ADCB 0x02 //channel B +#define DS2450_ADCC 0x04 //channel C +#define DS2450_ADCD 0x06 //channel D + +#define DS2450_IR_2V5 0x00 //input voltage range 2.55V +#define DS2450_IR_5V1 0x01 //input voltage range 5.1V +#define DS2450_AFH 0x20 //flag alarm value higher +#define DS2450_AFL 0x10 //flag alarm value lower +#define DS2450_AEH_ENABLE 0x08 //alarm value higher enable +#define DS2450_AEL_ENABLE 0x04 //alarm value lower enable + +#define DS2450_DISABLE_OUT 0x00 //disable ouput +#define DS2450_ENABLE_OUT 0x80//enable ouput + +#define DS2450_16_BIT 0x00 //ADC 16bits enable ouput +#define DS2450_15_BIT 0x0F //ADC 15bits enable ouput +#define DS2450_12_BIT 0x0C //ADC 12bits enable ouput +#define DS2450_8_BIT 0x08 //ADC 8bits enable ouput +#define DS2450_1_BIT 0x01 //ADC 1bits enable ouput +uint8_t DS2450_read_page(uint8_t id[], uint8_t adresse, uint8_t *val); +uint8_t DS2450_read_page(uint8_t n,uint8_t id[], uint8_t adresse, uint8_t *val); +uint8_t DS2450_convert(uint8_t id[], uint8_t input_select_mask,uint8_t read_out_control); +uint8_t DS2450_convert(uint8_t n,uint8_t id[], uint8_t input_select_mask,uint8_t read_out_control); +uint8_t DS2450_read_ADC(uint8_t id[], uint16_t adc[]); +uint8_t DS2450_read_ADC(uint8_t n,uint8_t id[], uint16_t adc[]); +uint8_t DS2450_start_and_read_ADC(uint8_t id[], uint16_t adc[]); +uint8_t DS2450_start_and_read_ADC(uint8_t n,uint8_t id[], uint16_t adc[]); +uint8_t DS2450_configure_channel_ADC(uint8_t id[],uint8_t channel,uint8_t conflsb,uint8_t confmsb); +uint8_t DS2450_configure_channel_ADC(uint8_t n,uint8_t id[],uint8_t channel,uint8_t conflsb,uint8_t confmsb); +uint8_t DS2450_configure_page(uint8_t id[], uint8_t adresse,uint8_t configpage[]); +uint8_t DS2450_configure_page(uint8_t n,uint8_t id[], uint8_t adresse,uint8_t configpage[]); +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 Horner_ITS90.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Horner_ITS90.h Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,49 @@
+#ifndef __Horner_ITS90_H__
+#define __Horner_ITS90_H__
+
+const double ITS90_TCK_subzero[] =
+{
+
+
+0.0,
+2.5173462E-2,
+-1.1662878E-6,
+-1.0833638E-9,
+-8.9773540E-13,
+-3.7342377E-16,
+-8.6632643E-20,
+-1.0450598E-23,
+-5.1920577E-28,
+0.0
+
+};
+const double ITS90_TCK_sub500[] =
+{
+0.0,
+2.508355E-02,
+7.860106E-08,
+-2.503131E-10,
+8.315270E-14,
+-1.228034E-17,
+9.804036E-22,
+-4.413030E-26,
+1.057734E-30,
+-1.052755E-35
+};
+
+const double ITS90_TCK_sub1372[] =
+{
+-1.318058E+02,
+4.830222E-02,
+-1.646031E-06,
+5.464731E-11,
+-9.650715E-16,
+8.802193E-21,
+-3.110810E-26,
+0.0,
+0.0,
+0.0
+
+};
+
+#endif
diff -r 000000000000 -r 9acbbb021a43 MAX31850.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MAX31850.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,125 @@
+/**
+* @file MAX31850.cpp
+* @brief library of MAX31850 1-Wire Thermocouple-to-Digital Converters,Cold-Junction Compensated (http://www.maximintegrated.com/datasheet/index.mvp/id/7953)
+* @author Frederic BLANC
+* @date 2014_01_15
+*/
+#include "mbed.h"
+#include "onewire.h"
+#include "MAX31850.h"
+#include "crc8.h"
+#include "Horner_ITS90.h"
+int MAX31850_Read_Scratch(uint8_t id[],uint8_t sp[],uint8_t n)
+{
+ if (id[0] == MAX31850_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ sp[0]=MAX31850_READ; // command
+ ow_command(n,sp[0], &id[0]);
+ for ( int i=0 ; i< MAX31850_SP_SIZE; i++ ) { //read 8xdata + CRC16
+ sp[i]=ow_byte_rd(n);
+ }
+ if(sp[8]!=crc8(sp,8))
+ return OW_ERROR_CRC;
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
+
+int MAX31850_Temp_TRUE(uint8_t *sp,double *temp)
+{
+
+
+ float temp_cj,temp_tc;
+ double vtc;
+ int err;
+
+ err = MAX31850_Temp_TC(sp,&temp_tc);
+ if(err) {
+ return err;
+ }
+ MAX31850_Temp_CJ(sp,&temp_cj);
+
+ vtc = MAX31850_K * temp_tc ;
+ *temp=0;
+ if(temp_tc < 0.0) {
+ for(int i=0;i<10;++i)
+ {
+
+ *temp+=ITS90_TCK_subzero[i]*pow(vtc,i);
+ }
+ } else if(temp_tc < 500.0) {
+ for(int i=0;i<10;++i)
+ {
+
+ *temp+=ITS90_TCK_sub500[i]*pow(vtc,i);
+ }
+ } else {
+ for(int i=0;i<10;++i)
+ {
+
+ *temp+=ITS90_TCK_sub1372[i]*pow(vtc,i);
+ }
+ }
+ return OW_OK;
+}
+
+
+int MAX31850_Temp_TC(uint8_t *sp,float *temp)
+{
+
+ uint8_t *ptr_meas;
+ uint16_t meas;
+
+ if(sp[0]& 1)
+ return MAX31850_ERR_FAULT;
+ if(sp[2]& (1<<1))
+ return MAX31850_ERR_OPEN_CIRCUIT;
+ if(sp[2]& (1<<2))
+ return MAX31850_ERR_SHORT2GND;
+ if(sp[2]& (1<<3))
+ return MAX31850_ERR_SHORT2VDD;
+ ptr_meas=(uint8_t*) &meas;
+ *ptr_meas = sp[0] ; // LSB
+ *++ptr_meas = sp[1]; // MSB
+ if ( meas & 0x8000 ) {
+
+ meas ^= 0xffff; // convert to positive => (twos complement)++
+ meas++;
+ *temp= -1.0 * MAX31850_ADC_TEMP_TC_UNIT * (float)(meas>>2);
+ } else {
+ *temp= MAX31850_ADC_TEMP_TC_UNIT * (float)(meas>>2);
+ }
+
+ return OW_OK;
+}
+
+int MAX31850_Temp_CJ(uint8_t *sp,float *temp)
+{
+ uint8_t *ptr_meas;
+ uint16_t meas;
+
+ ptr_meas=(uint8_t*) &meas;
+ *ptr_meas = sp[2] ; // LSB
+ *++ptr_meas = sp[3]; // MSB
+ if ( meas & 0x8000 ) {
+
+ meas ^= 0xffff; // convert to positive => (twos complement)++
+ meas++;
+ *temp= -1.0 * MAX31850_ADC_TEMP_CJ_UNIT * (float)(meas>>4);
+ } else {
+ *temp= MAX31850_ADC_TEMP_CJ_UNIT * (float)(meas>>4);
+ }
+ return OW_OK;
+}
+
+int MAX31850_Start_meas(uint8_t id[],uint8_t n=0)
+{
+ if (id[0] == MAX31850_ID) {
+ if (ow_reset(n)) //reset OW
+ return OW_SHORT_CIRCUIT;
+ ow_command(n,MAX31850_CONVERT_T, &id[0]);
+ return OW_OK;
+ }
+ return OW_ERROR_BAD_ID;
+}
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 MAX31850.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MAX31850.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,69 @@ +/* DS2450 specific values (see datasheet http://www.maximintegrated.com/datasheet/index.mvp/id/7953) */ +#ifndef __MAX31850_H__ +#define __MAX31850_H__ +#define MAX31850_ID 0x3B +#define MAX31850_SP_SIZE 9 + +#define MAX31850_CONVERT_T 0x44 // 0x44 +#define MAX31850_READ_POWER_SUPPLY 0xB4 +#define MAX31850_READ 0xBE + +#define MAX31850_ADC_TEMP_TC_UNIT 0.25 +#define MAX31850_ADC_TEMP_CJ_UNIT 0.0625 +#define MAX31850_K 41.276//41.276µV/C + +#define MAX31850_ERR_FAULT -10; +#define MAX31850_ERR_SHORT2VDD -12; +#define MAX31850_ERR_SHORT2GND -13; +#define MAX31850_ERR_OPEN_CIRCUIT -14; +/** + * @brief lecture registre MAX31850 + * @param [in] uint8_t id[] tableau d'identifiant OW + * @param [out] uint8_t sp[] tableau de registre + * @param [in] uint8_t n bus ow + * @return OW_OK si erreur retourne OW_ERROR_CRC + * @date 02/12/2013 + * + */ +int MAX31850_Read_Scratch(uint8_t id[],uint8_t sp[],uint8_t n) ; + +/** + * @brief lecture temperature thermocouple Linearized MAX31850 + * @param [in] uint8_t sp[] tableau registre MAX31850 + * @param [out] float temperature thermocouple Linearized degre Celsuis + * @return OW_OK si erreur retourne ERROR + * @date 04/12/2013 + * + */ + int MAX31850_Temp_TRUE(uint8_t *sp,double *temp); + +/** + * @brief lecture temperature thermocouple MAX31850 + * @param [in] uint8_t sp[] tableau registre MAX31850 + * @param [out] float temperature thermocouple degre Celsuis + * @return OW_OK si erreur retourne ERROR + * @date 04/12/2013 + * + */ + int MAX31850_Temp_TC(uint8_t *sp,float *temp) ; + +/** + * @brief lecture temperature cold junction MAX31850 + * @param [in] uint8_t sp[] tableau registre MAX31850 + * @param [out] float temperature cold junction degre Celsuis + * @return OW_OK si erreur retourne ERROR + * @date 04/12/2013 + * + */ +int MAX31850_Temp_CJ(uint8_t *sp,float *temp) ; + +/** + * @brief start convertion MAX31850 + * @param [in] uint8_t id[] tableau d'identifiant OW + * @param [in] uint8_t n bus ow + * @return OW_OK + * @date 02/12/2013 + * + */ +int MAX31850_Start_meas(uint8_t id[],uint8_t n); +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 crc16.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/crc16.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,56 @@
+#include <inttypes.h>
+#include "mbed.h"
+#include "onewire.h"
+
+#define CRC16INIT 0x0000
+//#define CRC16POLY 0x8005; // Polynome =x^16 + x^15 + x^2 + x^0 = 0x18005
+#define CRC16POLY 0xA001;
+
+uint16_t crc16(uint8_t* octets, uint16_t nboctets)
+{
+uint16_t crc = CRC16INIT;
+int i, done = 0;
+uint8_t todo;
+ if (nboctets != 0) {
+ do {
+ todo = octets[done];
+ crc ^= todo;
+ for (i = 0; i < 8; i++) {
+ if (crc % 2 != 0) {
+ crc = (crc >> 1) ^ CRC16POLY;
+ } else {
+ crc = crc >> 1;
+ }
+ }
+ done++;
+ } while (done < nboctets);
+
+
+ }
+
+return crc;
+}
+//CRC16 byte, always two bytes, bit inverted, LSByte first
+uint8_t ctrl_crc16(uint8_t* octets, uint16_t nboctets)
+{
+ uint16_t crc;
+ uint8_t *ptr;
+#ifdef DEBUG
+ printf( "\nCRC16 : " );
+ for ( uint8_t i=0 ; i< nboctets; i++ )
+ printf(":%2.2X",octets[i]);
+ printf( "\n" );
+#endif
+ crc =~crc16(octets, nboctets-2);
+ ptr=(uint8_t*)&crc;
+#ifdef DEBUG
+ printf( "\n" );
+ printf("CRC16:%X",crc);
+ printf( "\n" );
+#endif
+ if(*ptr==octets[nboctets-2])
+ if(*++ptr==octets[nboctets-1])
+ return 0;
+
+ return 1;
+ }
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 crc16.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/crc16.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,5 @@ +#ifndef _CRC16_ +#define _CRC16_ +uint16_t crc16(uint8_t* octets, uint16_t nboctets); +uint8_t ctrl_crc16(uint8_t* octets, uint16_t nboctets); +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 crc8.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/crc8.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,39 @@
+#include <inttypes.h>
+
+#define CRC8INIT 0x00
+#define CRC8POLY 0x18 //0X18 = X^8+X^5+X^4+X^0
+
+uint8_t crc8 ( uint8_t *data_in, uint16_t number_of_bytes_to_read )
+{
+ uint8_t crc;
+ uint16_t loop_count;
+ uint8_t bit_counter;
+ uint8_t data;
+ uint8_t feedback_bit;
+
+ crc = CRC8INIT;
+
+ for (loop_count = 0; loop_count != number_of_bytes_to_read; loop_count++)
+ {
+ data = data_in[loop_count];
+
+ bit_counter = 8;
+ do {
+ feedback_bit = (crc ^ data) & 0x01;
+
+ if ( feedback_bit == 0x01 ) {
+ crc = crc ^ CRC8POLY;
+ }
+ crc = (crc >> 1) & 0x7F;
+ if ( feedback_bit == 0x01 ) {
+ crc = crc | 0x80;
+ }
+
+ data = data >> 1;
+ bit_counter--;
+
+ } while (bit_counter > 0);
+ }
+
+ return crc;
+}
diff -r 000000000000 -r 9acbbb021a43 crc8.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/crc8.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,4 @@ +#ifndef _CRC8_ +#define _CRC8_ +uint8_t crc8 (uint8_t* data_in, uint16_t number_of_bytes_to_read); +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 onewire.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/onewire.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,575 @@
+/**
+* @file onewire.c
+* @brief library 1-Wire(www.maxim-ic.com)
+* @author Maciej Rajtar (Published 10 May 2010 www.mbed.org)
+* @author Frederic BLANC (Published 01/03/2012 www.mbed.org)
+*/
+
+#include "mbed.h"
+#include "onewire.h"
+
+DigitalInOut ow_pin(p21);
+DigitalInOut ow_0(p21);
+DigitalInOut ow_1(p22);
+DigitalInOut ow_2(p23);
+DigitalInOut ow_3(p24);
+DigitalInOut* t_ow[4]={&ow_0,&ow_1,&ow_2,&ow_3};
+
+//**********************************************************************************************************
+//* show_id
+//**********************************************************************************************************
+
+
+/**
+* @brief show_id
+* @param [in] id[] = rom_code
+* @param [out] text id
+* @date 02/12/2013
+*/
+char* ow_show_id( uint8_t id[],char *text) {
+
+ char hex[4];
+ sprintf(text,"");
+ sprintf(hex,"%2.2X",id[0]);
+ strcat(text,hex);
+ for (int i = OW_ROMCODE_SIZE-2; i >=1 ; --i ) {
+ sprintf(hex,"%2.2X",id[i]);
+ strcat(text,hex);
+ }
+ sprintf(hex,"%2.2X",id[OW_ROMCODE_SIZE-1]);
+ strcat(text,hex);
+ return text;
+
+}
+//**********************************************************************************************************
+//* show_id
+//**********************************************************************************************************
+
+
+/**
+* @brief uint64_id
+* @param [in] id[] = rom_code
+* @return [out] uint64_t id
+* @date 28/03/2011
+*/
+uint64_t uint64_id( uint8_t id[]) {
+
+ uint64_t *ptr;
+
+ ptr=(uint64_t *) &id[0];
+
+ return *ptr;
+}
+//**********************************************************************************************************
+//* search_sensors
+//**********************************************************************************************************
+
+/**
+* @brief search_sensors
+* @param [out] nSensors number of device onewire
+* @param [out] gSensorIDs[][] array of id romcode
+* @return OW_OK or OW_PRESENCE_ERR or OW_DATA_ERR
+* @date 20/06/2011
+*/
+uint8_t search_sensors(uint8_t *nSensors,uint8_t gSensorIDs[][OW_ROMCODE_SIZE] ) {
+
+
+ uint8_t i;
+ uint8_t id[OW_ROMCODE_SIZE];
+ uint8_t diff;
+ //printf( "Scanning Bus\r\n" );
+ diff = OW_SEARCH_FIRST;
+ for (*nSensors = 0 ; (diff != OW_LAST_DEVICE) && (*nSensors < MAXSENSORS) ;++(*nSensors) ) {
+ ow_find_sensor( &diff, &id[0] );
+ if ( diff == OW_PRESENCE_ERR ) {
+ //printf( "No Sensor found\r\n" );
+ return diff;
+ }
+ if ( diff == OW_DATA_ERR ) {
+ //printf( "Bus Error\r\n" );
+ return diff;
+ }
+ for (i=0;i<OW_ROMCODE_SIZE;i++)
+ gSensorIDs[*nSensors][i]=id[i];
+
+ }
+ return OW_OK;
+}
+/**
+* @brief search_sensors
+* @param [in] n num bus onewire
+* @param [out] nSensors number of device onewire
+* @param [out] gSensorIDs[][][] array of id romcode
+* @return OW_OK or OW_PRESENCE_ERR or OW_DATA_ERR
+* @date 02/09/2011
+*/
+uint8_t search_sensors(uint8_t n,uint8_t *nSensors,uint8_t gSensorIDs[][MAXSENSORS][OW_ROMCODE_SIZE] ) {
+
+
+ uint8_t i;
+ uint8_t id[OW_ROMCODE_SIZE];
+ uint8_t diff;
+ //printf( "Scanning Bus %d\r\n",n );
+ diff = OW_SEARCH_FIRST;
+ for (*nSensors = 0 ; (diff != OW_LAST_DEVICE) && (*nSensors < MAXSENSORS) ;++(*nSensors) ) {
+ ow_find_sensor(n, &diff, &id[0] );
+ if ( diff == OW_PRESENCE_ERR ) {
+ //printf( "No Sensor found\r\n" );
+ return diff;
+ }
+ if ( diff == OW_DATA_ERR ) {
+ //printf( "Bus Error\r\n" );
+ return diff;
+ }
+ for (i=0;i<OW_ROMCODE_SIZE;i++){
+ gSensorIDs[n][*nSensors][i]=id[i];
+ //printf( "id[%d]=%d\r\n" ,i,id[i]);
+ }
+
+ }
+ return OW_OK;
+}
+//**********************************************************************************************************
+//* find Sensors on 1-Wire-Bus
+//**********************************************************************************************************
+
+/**
+* @brief find Sensors on 1-Wire-Bus
+* @param [in/out] diff is the result of the last rom-search
+* @param [out] is the rom-code of the sensor found
+* @return OW_OK or OW_ERROR
+* @date 20/06/2011
+*/
+uint8_t ow_find_sensor(uint8_t *diff, uint8_t id[]) {
+ for (;;)
+ {
+ *diff = ow_rom_search( *diff, &id[0] );
+ if ( *diff==OW_PRESENCE_ERR)
+ return OW_ERROR;
+ if ( *diff==OW_DATA_ERR )
+ return OW_ERROR;
+ if ( *diff == OW_LAST_DEVICE )
+ return OW_OK ;
+ if ( id[0] == DS18B20_ID || id[0] == DS18S20_ID )
+ return OW_OK ;
+ if ( id[0] == DS2450_ID )
+ return OW_OK ;
+ if ( id[0] == MAX31850_ID )
+ return OW_OK ;
+ }
+}
+
+/**
+* @brief find Sensors on 1-Wire-Bus
+* @param [in] num bus onewire
+* @param [in/out] diff is the result of the last rom-search
+* @param [out] is the rom-code of the sensor found
+* @return OW_OK or OW_ERROR
+* @date 30/08/2011
+*/
+uint8_t ow_find_sensor(uint8_t n,uint8_t *diff, uint8_t id[]) {
+ for (;;)
+ {
+ *diff = ow_rom_search(n, *diff, &id[0] );
+ if ( *diff==OW_PRESENCE_ERR)
+ return OW_ERROR;
+ if ( *diff==OW_DATA_ERR )
+ return OW_ERROR;
+ if ( *diff == OW_LAST_DEVICE )
+ return OW_OK ;
+ if ( id[0] == DS18B20_ID || id[0] == DS18S20_ID )
+ return OW_OK ;
+ if ( id[0] == DS2450_ID )
+ return OW_OK ;
+ if ( id[0] == MAX31850_ID )
+ return OW_OK ;
+ }
+}
+//**********************************************************************************************************
+//* search romcode
+//**********************************************************************************************************
+
+/**
+* @brief search romcode
+* @param [in] uint8_t diff
+* @param [out] id romcode
+* @return next_diff or OW_LAST_DEVICE or OW_DATA_ERR or OW_PRESENCE_ERR
+* @date 20/06/2011
+*/
+uint8_t ow_rom_search( uint8_t diff, uint8_t id[] ) {
+ uint8_t i, j, next_diff;
+ uint8_t b;
+
+ if ( ow_reset() )
+ return OW_PRESENCE_ERR; // error, no device found
+ ow_byte_wr( OW_SEARCH_ROM ); // ROM search command
+ next_diff = OW_LAST_DEVICE; // unchanged on last device
+ i = OW_ROMCODE_SIZE * 8; // 8 bytes
+ do {
+ j = 8; // 8 bits
+ do {
+ b = ow_bit_io( 1 ); // read bit
+ if ( ow_bit_io( 1 ) ) { // read complement bit
+ if ( b ) // 11
+ return OW_DATA_ERR; // data error
+ } else {
+ if ( !b ) { // 00 = 2 devices
+ if ( diff > i || ((*id & 1) && diff != i) ) {
+ b = 1; // now 1
+ next_diff = i; // next pass 0
+ }
+ }
+ }
+ ow_bit_io( b ); // write bit
+ *id >>= 1;
+ if ( b )
+ *id |= 0x80; // store bit
+ --i;
+ } while ( --j );
+ id++; // next byte
+ } while ( i );
+ return next_diff; // to continue search
+}
+/**
+* @brief search romcode
+* @param [in]n num bus onewire
+* @param [in] uint8_t diff
+* @param [out] id romcode
+* @return next_diff or OW_LAST_DEVICE or OW_DATA_ERR or OW_PRESENCE_ERR
+* @date 30/08/2011
+*/
+uint8_t ow_rom_search(uint8_t n, uint8_t diff, uint8_t id[] ) {
+ uint8_t i, j, next_diff;
+ uint8_t b;
+ if ( ow_reset(n) )
+ return OW_PRESENCE_ERR; // error, no device found
+ ow_byte_wr(n, OW_SEARCH_ROM ); // ROM search command
+ next_diff = OW_LAST_DEVICE; // unchanged on last device
+ i = OW_ROMCODE_SIZE * 8; // 8 bytes
+ do {
+ j = 8; // 8 bits
+ do {
+ b = ow_bit_io(n, 1 ); // read bit
+ if ( ow_bit_io(n, 1 ) ) { // read complement bit
+ if ( b ) // 11
+ {
+
+ return OW_DATA_ERR; // data error
+ }
+ } else {
+ if ( !b ) { // 00 = 2 devices
+ if ( diff > i || ((*id & 1) && diff != i) ) {
+ b = 1; // now 1
+ next_diff = i; // next pass 0
+ }
+ }
+ }
+ ow_bit_io(n, b ); // write bit
+
+ *id >>= 1;
+ if ( b )
+ *id |= 0x80; // store bit
+ --i;
+ } while ( --j );
+ id++; // next byte
+
+ } while ( i );
+
+
+ return next_diff; // to continue search
+}
+
+
+//**********************************************************************************************************
+//* test pin onewire bus
+//**********************************************************************************************************
+/**
+* @brief test pin onewire bus
+* @return etat pin ow
+* @date 20/06/2011
+*/
+uint8_t ow_test_pin (void){
+ if (ow_pin)
+ return 1;
+return 0;
+}
+
+/**
+* @brief test pin onewire bus
+* @param [in] num bus one wire
+* @return etat pin ow
+* @date 30/08/2011
+*/
+uint8_t ow_test_pin (uint8_t n){
+
+ if (*t_ow[n])
+ return 1;
+return 0;
+}
+
+//**********************************************************************************************************
+//* onewire reset bus
+//**********************************************************************************************************
+/**
+* @brief onewire reset bus
+* @return pin ow or OW_SHORT_CIRCUIT
+* @date 20/06/2011
+*/
+uint8_t ow_reset(void) { // reset. Should improve to act as a presence pulse
+ uint8_t err;
+
+ ow_pin.output();
+ ow_pin = 0; // bring low for 500 us
+ wait_us(500);
+ ow_pin.input();
+ wait_us(60);
+ err = ow_pin;
+ wait_us(240);
+ if ( ow_pin == 0 ) { // short circuit
+ err = OW_SHORT_CIRCUIT;
+ }
+ return err;
+}
+
+/**
+* @brief onewire reset bus
+* @param [in] num bus onewire
+* @return pin ow or OW_SHORT_CIRCUIT
+* @date 30/08/2011
+*/
+uint8_t ow_reset(uint8_t n) { // reset. Should improve to act as a presence pulse
+ uint8_t err;
+
+ t_ow[n]->output();
+ *t_ow[n] = 0; // bring low for 500 us
+ wait_us(500);
+ t_ow[n]->input();
+ wait_us(60);
+ err = *t_ow[n];
+ wait_us(240);
+ if ( *t_ow[n] == 0 ) { // short circuit
+ err = OW_SHORT_CIRCUIT;
+
+ }
+ return err;
+}
+//**********************************************************************************************************
+//* read write onewire
+//**********************************************************************************************************
+/**
+* @brief read write onewire
+* @param [in/out] b data
+* @return data
+* @date 20/06/2011
+*/
+uint8_t ow_bit_io( uint8_t b ) {
+
+ ow_pin.output(); // drive bus low
+ ow_pin = 0;
+ wait_us(1); // Recovery-Time wuffwuff was 1
+
+ if ( b )
+ ow_pin.input(); // if bit is 1 set bus high (by ext. pull-up)
+ // delay was 15uS-1 see comment above
+ wait_us(15-1);
+ if ( ow_pin == 0 ) b = 0; // sample at end of read-timeslot
+ wait_us(60-15);
+ ow_pin.input();
+ return b;
+}
+/**
+* @brief read write onewire
+* @param [in] n num bus onewire
+* @param [in/out] b data
+* @return data
+* @date 30/08/2011
+*/
+uint8_t ow_bit_io(uint8_t n, uint8_t b ) {
+
+ t_ow[n]->output(); // drive bus low
+ *t_ow[n] = 0;
+ wait_us(1); // Recovery-Time wuffwuff was 1
+
+ if ( b )
+ t_ow[n]->input(); // if bit is 1 set bus high (by ext. pull-up)
+ // delay was 15uS-1 see comment above
+ wait_us(15-1);
+ if ( *t_ow[n] == 0 ) b = 0; // sample at end of read-timeslot
+ wait_us(60-15);
+ t_ow[n]->input();
+ // printf("ow_bit_io n=%d b=%X\n",n,b);
+ return b;
+}
+//**********************************************************************************************************
+//* byte write on onewire
+//**********************************************************************************************************
+/**
+* @brief byte write on onewire
+* @param [in] b data
+* @return data
+* @date 20/06/2011
+*/
+uint8_t ow_byte_wr( uint8_t b ) {
+ uint8_t i = 8, j;
+
+ do {
+ j = ow_bit_io( b & 1 );
+ b >>= 1;
+ if ( j )
+ b |= 0x80;
+ } while ( --i );
+ return b;
+}
+/**
+* @brief byte write on onewire
+* @param [in] n num bus onewire
+* @param [in] b data
+* @return data
+* @date 30/08/2011
+*/
+uint8_t ow_byte_wr(uint8_t n, uint8_t b ) {
+ uint8_t i = 8, j;
+
+ do {
+ j = ow_bit_io(n, b & 1 );
+ b >>= 1;
+ if ( j )
+ b |= 0x80;
+ } while ( --i );
+ return b;
+}
+//**********************************************************************************************************
+//* byte write on onewire
+//**********************************************************************************************************
+/**
+* @brief byte read on onewire
+* @return data
+* @date 20/06/2011
+*/
+uint8_t ow_byte_rd( void ) {
+ // read by sending 0xff (a dontcare?)
+ return ow_byte_wr( 0xFF );
+}
+
+/**
+* @brief byte read on onewire
+* @param [in] n num onewire
+* @return data
+* @date 30/08/2011
+*/
+uint8_t ow_byte_rd( uint8_t n) {
+ // read by sending 0xff (a dontcare?)
+ return ow_byte_wr(n, 0xFF );
+}
+//**********************************************************************************************************
+//* byte write on onewire
+//**********************************************************************************************************
+/**
+* @brief write command
+* @param [in] command
+* @param [in] id romcode
+* @date 20/06/2011
+*/
+uint8_t ow_command( uint8_t command, uint8_t id[] ) {
+ uint8_t i;
+
+ ow_reset();
+ if ( id ) {
+ ow_byte_wr( OW_MATCH_ROM ); // to a single device
+ i = OW_ROMCODE_SIZE;
+ do {
+ ow_byte_wr( *id );
+ ++id;
+ } while ( --i );
+ } else {
+ ow_byte_wr( OW_SKIP_ROM ); // to all devices
+ }
+ ow_byte_wr( command );
+ return 0;
+}
+/**
+* @brief write command
+* @param [in] n num bus onewire
+* @param [in] command
+* @param [in] id romcode
+* @date 30/08/2011
+*/
+uint8_t ow_command(uint8_t n, uint8_t command, uint8_t id[] ) {
+ uint8_t i;
+
+ ow_reset(n);
+ if ( id ) {
+ ow_byte_wr( n,OW_MATCH_ROM ); // to a single device
+ i = OW_ROMCODE_SIZE;
+ do {
+ ow_byte_wr(n, *id );
+ ++id;
+ } while ( --i );
+ } else {
+ ow_byte_wr(n, OW_SKIP_ROM ); // to all devices
+ }
+ ow_byte_wr(n, command );
+ return 0;
+}
+//**********************************************************************************************************
+//* ow mode
+//**********************************************************************************************************
+/**
+* @brief parasite enable
+* @date 20/06/2011
+*/
+uint8_t ow_parasite_enable(void) {
+ ow_pin.output();
+ ow_pin = 1;
+ return 0;
+}
+/**
+* @brief parasite disable
+* @date 20/06/2011
+*/
+uint8_t ow_parasite_disable(void) {
+
+ ow_pin.input();
+ return 0;
+}
+
+/**
+* @brief parasite enable
+* @param [in] n num bus onewire
+* @date 30/08/2011
+*/
+uint8_t ow_parasite_enable(uint8_t n) {
+ t_ow[n]->output();
+ *t_ow[n] = 1;
+ return 0;
+}
+/**
+* @brief parasite disable
+* @param [in] n num bus onewire
+* @date 30/08/2011
+*/
+uint8_t ow_parasite_disable(uint8_t n) {
+ t_ow[n]->input();
+ return 0;
+}
+/**
+* @brief PUL-UP bus OW
+* @return OW_OK
+* @date 20/06/2011
+*/
+uint8_t ow_PullUp(void)
+{
+ ow_pin.mode(PullUp); //PULL-UP bus OW
+return OW_OK;
+}
+/**
+* @brief PUL-UP bus OW
+* @param [in] n num bus onewire
+* @return OW_OK
+* @date 30/08/2011
+*/
+uint8_t ow_PullUp(uint8_t n)
+{
+ t_ow[n]->mode(PullUp); //PULL-UP bus OW
+return OW_OK;
+}
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 onewire.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/onewire.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,79 @@ +/** +* @file onewire.h +* @brief library 1-Wire(www.maxim-ic.com) +* @author Maciej Rajtar (Published 10 May 2010 www.mbed.org) +* @author Frederic BLANC (Published 01/03/2012 www.mbed.org) +*/ + +#ifndef _onewire_ +#define _onewire_ +#include "DS2450.h" +#include "DS18X20.h" +#include "MAX31850.h" +#include "crc8.h" +#include "crc16.h" +//#define DEBUG 1 +//#define DEBUG_L1 1 +#define ONEWIRE_PIN p21 + +#define MAXSENSORS 8 +#define MAXBUS 4 +// rom-code size including CRC +#define OW_ROMCODE_SIZE 8 + +#define OW_OK 0x00 +#define OW_ERROR 0x01 +#define OW_START_FAIL 0x02 +#define OW_ERROR_CRC 0x03 +#define OW_ERROR_BAD_ID 0x04 +#define OW_BUSY 0x05 + +#define OW_MATCH_ROM 0x55 +#define OW_SKIP_ROM 0xCC +#define OW_SEARCH_ROM 0xF0 +#define OW_READ_ROM 0x33 +#define OW_CONDITIONAL_SEARCH 0xEC +#define OW_OVERDRIVE_SKIP_ROM 0x3C +#define OW_OVERDRIVE_MATCH_ROM 0x69 + +#define OW_SHORT_CIRCUIT 0xFF +#define OW_SEARCH_FIRST 0xFF // start new search +#define OW_PRESENCE_ERR 0x01 +#define OW_DATA_ERR 0xFE +#define OW_LAST_DEVICE 0x00 // last device found +// 0x01 ... 0x40: continue searching + + + +char* ow_show_id( uint8_t id[],char *text); +uint64_t uint64_id( uint8_t id[]); + +uint8_t search_sensors(uint8_t *nSensors,uint8_t id[][OW_ROMCODE_SIZE] ); +uint8_t search_sensors(uint8_t n,uint8_t *nSensors,uint8_t gSensorIDs[][MAXSENSORS][OW_ROMCODE_SIZE] ); +uint8_t ow_PullUp(void); +uint8_t ow_PullUp(uint8_t n); + + +uint8_t ow_test_pin (void); +uint8_t ow_test_pin (uint8_t n); +uint8_t ow_reset(void); +uint8_t ow_reset(uint8_t n); +uint8_t ow_rom_search( uint8_t diff, uint8_t id[] ); +uint8_t ow_rom_search(uint8_t n, uint8_t diff, uint8_t id[] ); +uint8_t ow_command( uint8_t command, uint8_t id[] ); +uint8_t ow_command(uint8_t n, uint8_t command, uint8_t id[] ); +uint8_t ow_find_sensor(uint8_t *diff, uint8_t id[]); +uint8_t ow_find_sensor(uint8_t n,uint8_t *diff, uint8_t id[]); +uint8_t ow_parasite_enable(void); +uint8_t ow_parasite_enable(uint8_t n); +uint8_t ow_parasite_disable(void); +uint8_t ow_parasite_disable(uint8_t n); +uint8_t ow_bit_io( uint8_t b ); +uint8_t ow_bit_io(uint8_t n, uint8_t b); +uint8_t ow_byte_wr( uint8_t b ); +uint8_t ow_byte_wr(uint8_t n, uint8_t b ); +uint8_t ow_byte_rd( void ); +uint8_t ow_byte_rd( uint8_t n); + + +#endif \ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 utils.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/utils.cpp Thu Feb 12 14:03:55 2015 +0000
@@ -0,0 +1,12 @@
+#include <stdint.h>
+
+uint16_t uint8_to_uint16(uint8_t lsb, uint8_t msb)
+{
+ uint16_t data;
+ uint8_t *ptr;
+
+ ptr=(uint8_t*)&data;
+ *ptr=lsb;
+ *++ptr=msb;
+ return data;
+}
\ No newline at end of file
diff -r 000000000000 -r 9acbbb021a43 utils.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/utils.h Thu Feb 12 14:03:55 2015 +0000 @@ -0,0 +1,4 @@ +#ifndef _utils_ +#define _utils_ +uint16_t uint8_to_uint16(uint8_t lsb, uint8_t msb); +#endif \ No newline at end of file