Esmacat HarmonicBionics / Mbed OS EASE_Example

Build an EtherCAT Slave

Dependencies:   EsmacatShield

Quick Build EtherCAT Slave

Esmacat is an easy yet powerful EtherCAT solution for robot mechatronics developed by Harmonic Bionics. It provides a full EtherCAT hardware and software solution for Master and Slave devices which allows developers to set up and run an EtherCAT application within minutes. It also supports Power-over-EtherCAT (POE) technology which allows high-speed communication and logic-power supply over a single Ethernet cable simplifying the cabling and wiring needs of the system significantly.

EtherCAT Arduino Shield by Esmacat (EASE) is a shield which can be used to build a Slave device. It stacks onto Mbed boards with form factor of Arduino UNO. The Mbed Base board communicates with EASE over SPI. EASE communicates with the Master over EtherCAT. Multiple EASE boards can be connected with Ethernet cables in a daisy-chain topology.

Product Page

Buy this Product

https://os.mbed.com/media/uploads/pratima_hb/ethercat.png

https://os.mbed.com/media/uploads/pratima_hb/ease_multiple.png

Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Hardware-Setup

Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Software

Files at this revision

API Documentation at this revision

Revision 1:ee9b73e47960, committed 2020-02-06

Comitter:
pratima_hb
Date:
Thu Feb 06 22:33:12 2020 +0000
Parent:
0:ba190577ec8a
Commit message:
Updated the Example as per the datatype updates in the EsmacatShield Library.

Changed in this revision

EsmacatShield.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file 
diff -r ba190577ec8a -r ee9b73e47960 EsmacatShield.lib
--- a/EsmacatShield.lib	Thu Jan 30 16:11:22 2020 +0000
+++ b/EsmacatShield.lib	Thu Feb 06 22:33:12 2020 +0000
@@ -1,1 +1,1 @@
-https://os.mbed.com/users/pratima_hb/code/EsmacatShield/#b66c3e4ce9f5
+https://os.mbed.com/users/pratima_hb/code/EsmacatShield/#77c2a6061e77

diff -r ba190577ec8a -r ee9b73e47960 main.cpp
--- a/main.cpp	Thu Jan 30 16:11:22 2020 +0000
+++ b/main.cpp	Thu Feb 06 22:33:12 2020 +0000
@@ -1,10 +1,43 @@
+/**
+ ******************************************************************************
+ * @file    main.cpp
+ * @date    February 06, 2020
+ * @brief   mbed test application - Esmacat Shield(EASE) working together with 
+ *          Base Board with Arduino UNO form factor as EtherCAT slave.
+ *          With the successful execution of this code the LED on EASE should
+ *          blink. It should also estabilish data transfer between the EtherCAT
+ *          Master of Esmacat on the PC.
+ *          For further information please refer to the tutorials at
+ *          https://www.esmacat.com/tutorials 
+ ******************************************************************************
+ 
+  Copyright (c) 2020 https://www.esmacat.com/
 
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+  EsmacatShield.h - Library for using EtherCAT Arduino Shield by Esmacat(EASE).
+  Created by Esmacat, 01/22/2020
+  
+*******************************************************************************
+* @file EsmacatShield.h
+*******************************************************************************
+*/
 #include "mbed.h"
 #include <EsmacatShield.h> //Include EsmacatShield Library
 
 
 int counter;
-int v[8];                  //an array of integer is declared for reading the 
+int16_t v[8];                  //an array of integer is declared for reading the 
                            //data packet of EtherCAT from EASE 8 registers
 Serial pc(USBTX, USBRX);   // Configuring the serial port to host PC
 
@@ -31,7 +64,7 @@
       for (int i=0;i<8;i++)         //Print out read registers to host PC terminal
       {
         pc.printf("%d",i);
-        pc.printf("\t");
+        pc.printf("  ");
         pc.printf("%d",v[i]);
         pc.printf("\n");
       }