erez i
Connect to SSID, get ip by dhcp, ping google.com, display statistics
Dependencies: NVIC_set_all_priorities cc3000_hostdriver_mbedsocket mbed
Fork of
cc3000_ping_demo
by 
Martin Kojtal
Revision 10:b98f2d6e6da5, committed 2014-06-25
- Comitter:
- erezi
- Date:
- Wed Jun 25 06:12:22 2014 +0000
- Parent:
- 9:a0610da52eed
- Commit message:
- version_2.0
Changed in this revision
--- a/NVIC_set_all_priorities.lib Tue Jun 03 08:43:07 2014 +0000 +++ b/NVIC_set_all_priorities.lib Wed Jun 25 06:12:22 2014 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#01504ecd2025 +http://mbed.org/users/erezi/code/NVIC_set_all_priorities/#7ba0b126a57e
--- a/cc3000_hostdriver_mbedsocket.lib Tue Jun 03 08:43:07 2014 +0000 +++ b/cc3000_hostdriver_mbedsocket.lib Wed Jun 25 06:12:22 2014 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#ca8c234997c0 +http://mbed.org/users/erezi/code/cc3000_hostdriver_mbedsocket/#e9d12b82813e
--- a/init.cpp Tue Jun 03 08:43:07 2014 +0000
+++ b/init.cpp Wed Jun 25 06:12:22 2014 +0000
@@ -35,10 +35,10 @@
NVIC_set_all_irq_priorities(3);
NVIC_SetPriority(SPI0_IRQn, 0x0); // Wi-Fi SPI interrupt must be higher priority than SysTick
- NVIC_SetPriority(PORTA_IRQn, 0x1);
+ NVIC_SetPriority(PORTA_IRQn, 0x3);
NVIC_SetPriority(SysTick_IRQn, 0x2); // SysTick set to lower priority than Wi-Fi SPI bus interrupt
- PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
- PORTA->ISFR |= (1 << 16);
+ // PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
+// PORTA->ISFR |= (1 << 16);
}
#elif (MY_BOARD == WIFI_DIPCORTEX)
--- a/main.cpp Tue Jun 03 08:43:07 2014 +0000
+++ b/main.cpp Wed Jun 25 06:12:22 2014 +0000
@@ -27,10 +27,17 @@
cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), "ssid", "key", WPA2, false);
Serial pc(UART_TX, UART_RX);
#elif (MY_BOARD == MBED_BOARD_EXAMPLE)
-cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), "ssid", "key", WPA2, false);
+//cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), "ssid", "key", WPA2, false);
+//Serial pc(USBTX, USBRX);
+cc3000 wifi(D3, D5, D10, SPI(SPI_MOSI, SPI_MISO, SPI_SCK), "ssid", "key", WPA2, false);
Serial pc(USBTX, USBRX);
+
+//printf("pin selection Ok. \r\n");
+
#else
+
+
#endif
/**
@@ -40,10 +47,12 @@
*/
int main() {
init(); /* board dependent init */
- pc.baud(115200);
+// pc.baud(115200);
+ pc.baud(9600);
printf("CC3000 ping demo. \r\n");
wifi.init();
+ printf("Wifi init done. \r\n");
if (wifi.connect() == -1) {
printf("Failed to connect. Please verify connection details and try again. \r\n");
} else {
--- a/main.h Tue Jun 03 08:43:07 2014 +0000 +++ b/main.h Wed Jun 25 06:12:22 2014 +0000 @@ -20,7 +20,10 @@ #define WIFI_DIPCORTEX 2 #define UNDEFINED 3 -#define MY_BOARD WIGO +//#define MY_BOARD WIGO +#define MY_BOARD MBED_BOARD_EXAMPLE + +#include "my_port_mapping.h" void init();
--- a/mbed.bld Tue Jun 03 08:43:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/0b3ab51c8877 \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.lib Wed Jun 25 06:12:22 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/erezi/code/mbed/#4f9a848d74c7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/my_port_mapping.h Wed Jun 25 06:12:22 2014 +0000 @@ -0,0 +1,1 @@ +