Dorian Cauceglia / Mbed 2 deprecated Active-WolfMan_V2-5-All-Frank-Board-Functions_copy

f

Dependencies:   TS_DISCO_F746NG mbed LCD_DISCO_F746NG mbed-rtos BSP_DISCO_F746NG FatFS X_NUCLEO_IHM02A1

Embed: (wiki syntax)

« Back to documentation index

EEPROM_Emulation
Functions

EEPROM_Emulation

Functions

static HAL_StatusTypeDef EE_Format (void)
 Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE.
static uint16_t EE_FindValidPage (uint8_t Operation)
 Find valid Page for write or read operation.
static uint16_t EE_VerifyPageFullWriteVariable (uint16_t VirtAddress, uint16_t Data)
 Verify if active page is full and Writes variable in EEPROM.
static uint16_t EE_PageTransfer (uint16_t VirtAddress, uint16_t Data)
 Transfers last updated variables data from the full Page to an empty one.
static uint16_t EE_VerifyPageFullyErased (uint32_t Address)
 Verify if specified page is fully erased.
uint16_t EE_Init (void)
 Restore the pages to a known good state in case of page's status corruption after a power loss.
uint16_t EE_ReadVariable (uint16_t VirtAddress, uint16_t *Data)
 Returns the last stored variable data, if found, which correspond to the passed virtual address.
uint16_t EE_WriteVariable (uint16_t VirtAddress, uint16_t Data)
 Writes/upadtes variable data in EEPROM.

Function Documentation

static uint16_t EE_FindValidPage ( uint8_t  Operation ) [static]

Find valid Page for write or read operation.

Parameters:
Operation,:operation to achieve on the valid page. This parameter can be one of the following values:

  • READ_FROM_VALID_PAGE: read operation from valid page
  • WRITE_IN_VALID_PAGE: write operation from valid page
Return values:
Validpage number (PAGE or PAGE1) or NO_VALID_PAGE in case of no valid page was found

Definition at line 514 of file eeprom.cpp.

static HAL_StatusTypeDef EE_Format ( void   ) [static]

Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE.

Parameters:
None
Return values:
Statusof the last operation (Flash write or erase) done during EEPROM formating

Definition at line 462 of file eeprom.cpp.

uint16_t EE_Init ( void   )

Restore the pages to a known good state in case of page's status corruption after a power loss.

Parameters:
None.
Return values:
-Flash error code: on write Flash error

  • FLASH_COMPLETE: on success

Definition at line 77 of file eeprom.cpp.

static uint16_t EE_PageTransfer ( uint16_t  VirtAddress,
uint16_t  Data 
) [static]

Transfers last updated variables data from the full Page to an empty one.

Parameters:
VirtAddress,:16 bit virtual address of the variable
Data,:16 bit data to be written as variable value
Return values:
Successor error status:

  • FLASH_COMPLETE: on success
  • PAGE_FULL: if valid page is full
  • NO_VALID_PAGE: if no valid page was found
  • Flash error code: on write Flash error

Definition at line 647 of file eeprom.cpp.

uint16_t EE_ReadVariable ( uint16_t  VirtAddress,
uint16_t *  Data 
)

Returns the last stored variable data, if found, which correspond to the passed virtual address.

Parameters:
VirtAddress,:Variable virtual address
Data,:Global variable contains the read variable value
Return values:
Successor error status:

  • 0: if variable was found
  • 1: if the variable was not found
  • NO_VALID_PAGE: if no valid page was found.

Definition at line 379 of file eeprom.cpp.

static uint16_t EE_VerifyPageFullWriteVariable ( uint16_t  VirtAddress,
uint16_t  Data 
) [static]

Verify if active page is full and Writes variable in EEPROM.

Parameters:
VirtAddress,:16 bit virtual address of the variable
Data,:16 bit data to be written as variable value
Return values:
Successor error status:

  • FLASH_COMPLETE: on success
  • PAGE_FULL: if valid page is full
  • NO_VALID_PAGE: if no valid page was found
  • Flash error code: on write Flash error

Definition at line 586 of file eeprom.cpp.

uint16_t EE_VerifyPageFullyErased ( uint32_t  Address ) [static]

Verify if specified page is fully erased.

Parameters:
Address,:page address This parameter can be one of the following values:

  • PAGE0_BASE_ADDRESS: Page0 base address
  • PAGE1_BASE_ADDRESS: Page1 base address
Return values:
pagefully erased status:

  • 0: if Page not erased
  • 1: if Page erased

Definition at line 330 of file eeprom.cpp.

uint16_t EE_WriteVariable ( uint16_t  VirtAddress,
uint16_t  Data 
)

Writes/upadtes variable data in EEPROM.

Parameters:
VirtAddress,:Variable virtual address
Data,:16 bit data to be written
Return values:
Successor error status:

  • FLASH_COMPLETE: on success
  • PAGE_FULL: if valid page is full
  • NO_VALID_PAGE: if no valid page was found
  • Flash error code: on write Flash error

Definition at line 438 of file eeprom.cpp.

Generated on Thu Jul 14 2022 06:12:33 by  doxygen 1.7.2